It seems Alex wrote:
>
> OK - here's the part relevant to ata:
>
>
> ata-pci0: <Intel PIIX4 ATA-33 controller> port 0xfcf0-0xfcff at device
> 1.1 on pci0
> ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfcf0
> ata0: mask=03 status0=50 status1=00
> ata0: mask=03 status0=50 status1=00
> ata0: devices = 0x1
> ata0 at 0x01f0 irq 14 on ata-pci0
> ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfcf8
> ata1: mask=03 status0=00 status1=00
> ata1: mask=03 status0=00 status1=00
> ata1: devices = 0xc
Here it sees two devices, apparently you cdrom is reacting both on
master AND slave addresses :(
> ata1-slave: ata_command: timeout waiting for intr
> ata1-slave: identify failed
But when we try to talk to it it fails...
> ata0-master: success setting up UDMA2 mode on PIIX4 chip
But when we try to talk to it it fails...
> Any ideas?
I'll try to come up with a patch that solves this...
-Søren
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
