In order to have a prompt answer, you should at least send the relevant parts of 3.4 dmesg and 4.0 dmesg (to let know to the driver maintainer which board you use, for example) The problem report you have sent is useless without this info TfH Klaus Herrmann wrote: > > Hello! > > I just upgraded my 3.4-Stable system to a 4.0-current. It is running fine > - with one exeption: the kernel seems to have problems with my 2nd ide/ata > controller. when it is enabled, the system displays at boot time that it > cannot find a driver vor the CDROM-Drive on ata1. > On the 2nd ide channel are actually 2 devices: one noname-atapi-24x-cdrom > and an atapi-cd-recorder. i don't really know whether the problem is the > controller or the cd-drive. my kernel-config says: > --------------------------------------------- > device ata > device atadisk # ATA disk drives > device atapicd # ATAPI CDROM drives > device atapifd # ATAPI floppy drives > device atapist # ATAPI tape drives > options ATA_STATIC_ID #Static device numbering > options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices > ----------------------------------------------- > > i also tried using device ata with isa options but no change. btw, this > problem also appears when i boot fron the 20000127-bootdisks. > > i think i do have MAKEDEVed all necessary devices - ad0-ad3 are all > complete. > > some data on my pc: > k6-2-300 cpu > via-chipsatz, via-ide-controller > > thanks, > Klaus > > -- > Klaus Herrmann <[EMAIL PROTECTED]> > > To Unsubscribe: send mail to [EMAIL PROTECTED] > with "unsubscribe freebsd-current" in the body of the message To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message