Hello there;
When booting, the kernel reports:
si1: iomem (0xfffc0000) out of range
entries on KERNEL is:
device si0 at isa? irq 15 iomem 0xd0000
/var/run/dmesg.boot:
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #0: Sat Feb 12 09:11:24 CST 2000
[EMAIL PROTECTED]:/usr/src/sys/compile/RODIA
Calibrating clock(s) ... TSC clock: 398279751 Hz, i8254 clock: 1193214 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium II/Pentium II Xeon/Celeron (398.27-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134217728 (131072K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x0037e000 - 0x040fcfff, 64483328 bytes (15743 pages)
0x04100000 - 0x07ff5fff, 66019328 bytes (16118 pages)
avail memory = 126439424 (123476K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f6a90
bios32: Entry = 0xfd7b0 (c00fd7b0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x203
pnpbios: Found PnP BIOS data at 0xc00f6ae0
pnpbios: Entry = f0000:9fea Rev = 1.0
Other BIOS signatures found:
ACPI: 000f6ac0
Preloaded elf kernel "kernel" at 0xc0365000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x7190, revid=0x02
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base f8000000, size 26
found-> vendor=0x8086, dev=0x7191, revid=0x02
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x8086, dev=0x7110, revid=0x02
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7111, revid=0x01
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=9
map[20]: type 1, range 32, base 00001400, size 5
found-> vendor=0x8086, dev=0x7113, revid=0x02
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[90]: type 1, range 32, base 00007000, size 4
found-> vendor=0x1013, dev=0x6001, revid=0x01
class=04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base f4300000, size 12
map[14]: type 1, range 32, base f4000000, size 20
found-> vendor=0x8086, dev=0x1229, revid=0x05
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base f4302000, size 12
map[14]: type 1, range 32, base 00001420, size 5
map[18]: type 1, range 32, base f4100000, size 20
found-> vendor=0x9004, dev=0x8178, revid=0x00
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=14
map[10]: type 1, range 32, base 00001000, size 8
map[14]: type 1, range 32, base f4301000, size 12
found-> vendor=0x8086, dev=0x1229, revid=0x02
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base f4303000, size 12
map[14]: type 1, range 32, base 00001440, size 5
map[18]: type 1, range 32, base f4200000, size 20
found-> vendor=0x109e, dev=0x0350, revid=0x12
class=04-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base f4304000, size 12
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
found-> vendor=0x10de, dev=0x0020, revid=0x04
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base f5000000, size 24
map[14]: type 1, range 32, base fc000000, size 24
pci1: <PCI bus> on pcib1
vga-pci0: <NVidia Riva TNT graphics accelerator> mem
0xfc000000-0xfcffffff,0xf5000000-0xf5ffffff irq 11 at device 0.0 on pci1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: Intel PIIX4 ATA controller (vendor=0x8086, dev=0x7111) at 7.1
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1400-0x141f irq 9 at device
7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Texas Instruments UT-USB41 hub, class 9/0, rev 1.00/1.00, addr 2
uhub1: 4 ports with 4 removable, self powered
ugen0: Entrega product 0x8001, rev 1.00/0.09, addr 3
ugen1: Entrega product 0x8001, rev 1.00/1.01, addr 4
kue0: Entrega Technologies Inc. USB-Ethernet, rev 1.00/0.02, addr 5
kue0: Ethernet address: 00:50:f8:00:04:e0
kue0: supplying EUI64: 00:50:f8:ff:fe:00:04:e0
bpf: kue0 attached
chip1: <Intel 82371AB Power management controller> port 0x7000-0x700f at device 7.3 on
pci0
csa0: <Crystal Semiconductor CS4610/4611 Audio accelerator> mem
0xf4000000-0xf40fffff,0xf4300000-0xf4300fff irq 5 at device 11.0 on pci0
device_probe_and_attach: csa0 attach returned 6
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> port 0x1420-0x143f mem
0xf4100000-0xf41fffff,0xf4302000-0xf4302fff irq 11 at device 13.0 on pci0
fxp0: Ethernet address 00:90:27:16:ac:eb
bpf: fxp0 attached
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x1000-0x10ff mem 0xf4301000-0xf4301fff
irq 14 at device 14.0 on pci0
ahc0: Reading SEEPROM...done.
ahc0: internal 50 cable is present, internal 68 cable is present
ahc0: external cable not present
ahc0: BIOS eeprom is present
ahc0: High byte termination Enabled
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc0: Downloading Sequencer Program... 415 instructions downloaded
fxp1: <Intel EtherExpress Pro 10/100B Ethernet> port 0x1440-0x145f mem
0xf4200000-0xf42fffff,0xf4303000-0xf4303fff irq 5 at device 15.0 on pci0
using shared irq5.
fxp1: Ethernet address 00:a0:c9:66:eb:72
bpf: fxp1 attached
bktr0: <BrookTree 848A> mem 0xf4304000-0xf4304fff irq 9 at device 16.0 on pci0
using shared irq9.
Using 430 FX chipset compatibilty mode
iicbb0: <I2C generic bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iicsmb0: <I2C to SMB bridge> on iicbus0
smbus0: <System Management Bus> on iicsmb0
smb0: <SMBus general purpose I/O> on smbus0
iic0: <I2C general purpose I/O> on iicbus0
smbus1: <System Management Bus> on bti2c0
smb1: <SMBus general purpose I/O> on smbus1
brooktree0: PCI bus latency is 132.
bktr0: buffer size 3555328, addr 0x6000000
bktr: GPIO is 0x00ffffff
bktr0: Detected a MSP3430 at 0x80
STB TV/PCI, Temic PAL I tuner, dbx stereo, msp3400c stereo.
pnpbios: 18 devices, largest 126 bytes
PNP0c02: adding memory range 0xe0000-0xe3fff, size=0x4000, align=0x4000
PNP0c02: start dependant
pnpbios: handle 0 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0x370-0x371, size=0x2, align=0x1
PNP0c02: adding io range 0xea-0xeb, size=0x2, align=0x1
PNP0c02: adding memory range 0xfffc0000-0xffffffff, size=0x40000
PNP0c02: start dependant
pnpbios: handle 1 device ID PNP0c02 (020cd041)
PNP0c01: adding memory range 0-0x9ffff, size=0xa0000
PNP0c01: adding memory range 0xe4000-0xfffff, size=0x1c000
PNP0c01: adding memory range 0x100000-0x7ffffff, size=0x7f00000
PNP0c01: adding memory range 0xfff80000-0xfffbffff, size=0x40000
PNP0c01: start dependant
pnpbios: handle 2 device ID PNP0c01 (010cd041)
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
PNP0200: start dependant
pnpbios: handle 3 device ID PNP0200 (0002d041)
PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1
PNP0000: adding irq mask 00x4
PNP0000: start dependant
pnpbios: handle 4 device ID PNP0000 (0000d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: adding irq mask 00x1
PNP0100: start dependant
pnpbios: handle 5 device ID PNP0100 (0001d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: adding irq mask 0x100
PNP0b00: start dependant
pnpbios: handle 6 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: adding irq mask 00x2
PNP0303: start dependant
pnpbios: handle 7 device ID PNP0303 (0303d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
PNP0c04: start dependant
pnpbios: handle 8 device ID PNP0c04 (040cd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
PNP0800: start dependant
pnpbios: handle 9 device ID PNP0800 (0008d041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
PNP0a03: start dependant
pnpbios: handle 10 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0x8000-0x803f, size=0x40, align=0x1
PNP0c02: adding io range 0x7000-0x700f, size=0x10, align=0x1
PNP0c02: start dependant
pnpbios: handle 11 device ID PNP0c02 (020cd041)
PNP0c02: adding memory range 0xc8800-0xcbfff, size=0x3800
PNP0c02: adding memory range 0xdb000-0xdbfff, size=0x1000
PNP0c02: start dependant
pnpbios: handle 12 device ID PNP0c02 (020cd041)
PNP0f13: adding irq mask 0x1000
PNP0f13: start dependant
pnpbios: handle 13 device ID PNP0f13 (130fd041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8
PNP0501: adding irq mask 0x10
PNP0501: start dependant
pnpbios: handle 14 device ID PNP0501 (0105d041)
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0x8
PNP0501: adding irq mask 00x8
PNP0501: start dependant
pnpbios: handle 15 device ID PNP0501 (0105d041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x8
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
PNP0700: start dependant
pnpbios: handle 17 device ID PNP0700 (0007d041)
PNP0400: adding io range 0x378-0x37f, size=0x8, align=0x8
PNP0400: adding irq mask 0x80
PNP0400: start dependant
pnpbios: handle 19 device ID PNP0400 (0004d041)
Trying Read_Port at 203
CSC0000: start dependant
CSC0000: adding dma mask 0x2
CSC0000: adding dma mask 0x9
CSC0000: adding irq mask 0x20
CSC0000: adding io range 0x534-0x537, size=0x4, align=0x4
CSC0000: adding io range 0x388-0x38b, size=0x4, align=0x8
CSC0000: adding io range 0x220-0x22f, size=0x10, align=0x20
CSC0000: start dependant
CSC0000: adding dma mask 0xa
CSC0000: adding dma mask 0xb
CSC0000: adding irq mask 0xcb8
CSC0000: adding io range 0x534-0xfff, size=0x4, align=0x4
CSC0000: adding io range 0x388-0x38b, size=0x4, align=0x8
CSC0000: adding io range 0x220-0x26f, size=0x10, align=0x20
CSC0000: start dependant
CSC0000: adding dma mask 0xb
CSC0000: adding irq mask 0xcb8
CSC0000: adding io range 0x534-0xfff, size=0x4, align=0x4
CSC0000: adding io range 0x388-0x3cb, size=0x4, align=0x8
CSC0000: adding io range 0x220-0x30f, size=0x10, align=0x20
CSC0000: end dependant
CSC0001: start dependant
CSC0001: adding io range 0x200-0x207, size=0x8, align=0x8
CSC0001: start dependant
CSC0001: adding io range 0x208-0x20f, size=0x8, align=0x8
CSC0001: end dependant
CSC0010: adding io range 0x120-0x3af, size=0x8, align=0x8
CSC0003: start dependant
CSC0003: adding irq mask 0x400
CSC0003: adding io range 0x330-0x331, size=0x2, align=0x8
CSC0003: start dependant
CSC0003: adding irq mask 0xcb8
CSC0003: adding io range 0x330-0x361, size=0x2, align=0x8
CSC0003: start dependant
CSC0003: adding io range 0x330-0x3e1, size=0x2, align=0x8
CSC0003: end dependant
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 26 03 c8
psm: status 26 03 c8
psm: status 26 03 c8
psm: status 10 00 64
psm: data 08 00 00
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:c8, syncbits:08
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 05 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x441 0x451 0x441 0x441
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x441 0x449 0x441 0x441
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: IEEE1284 device found /NIBBLE/NIBBLE_ID/Extensibility Link
Probing for PnP devices on ppbus0:
ppbus0: <EPSON Stylus COLOR 600> PRINTER ESCPL2,BDC
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
joy0 at port 0x201 on isa0
isa_probe_children: probing PnP devices
unknown0: <PNP0c02> at iomem 0xe0000-0xe7fff on isa0
si1: iomem (0xfffc0000) out of range
unknown1: <PNP0c02> at port 0x370-0x371,0xea-0xeb iomem 0xfffc0000-0xffffffff on isa0
unknown: <PNP0c01> can't assign resources
unknown2: <PNP0200> at port 0-0xf,0x81-0x8f,0xc0-0xdf drq 4 on isa0
unknown: <PNP0000> can't assign resources
unknown3: <PNP0100> at port 0x40-0x43 irq 0 on isa0
unknown4: <PNP0b00> at port 0x70-0x71 irq 8 on isa0
unknown: <PNP0303> can't assign resources
unknown5: <PNP0c04> at port 0xf0-0xff irq 13 on isa0
unknown: <PNP0800> can't assign resources
unknown6: <PNP0a03> at port 0xcf8-0xcff on isa0
unknown7: <PNP0c02> at port 0x4d0-0x4d1,0x8000-0x803f,0x7000-0x700f on isa0
unknown8: <PNP0c02> at iomem 0xc8800-0xd07ff,0xdb000-0xdbfff on isa0
unknown: <PNP0f13> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0400> can't assign resources
pcm0: <CS423x> at port 0x534-0x537,0x388-0x38b,0x220-0x22f irq 10 drq 1,0 on isa0
pcm: setmap 30000, ff00; 0xc88af000 -> 30000
pcm: setmap 40000, ff00; 0xc88bf000 -> 40000
joy1: <CSC0001 PnP Joystick> at port 0x208-0x20f on isa0
unknown9: <Ctrl> at port 0x120-0x127 on isa0
unknown10: <MPU> at port 0x330-0x331 on isa0
BIOS Geometries:
0:03fe3f20 0..1022=1023 cylinders, 0..63=64 heads, 1..32=32 sectors
1:03fe3f20 0..1022=1023 cylinders, 0..63=64 heads, 1..32=32 sectors
0 accounted for
Device configuration finished.
bpf: ppp0 attached
bpf: ppp1 attached
bpf: ppp2 attached
bpf: ppp3 attached
new masks: bio 40080240, tty 400314ba, net 40071eba
bpf: lo0 attached
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
bpf: faith0 attached
IPsec: Initialized Security Association Processing.
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(probe4:ahc0:0:4:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe4:ahc0:0:4:0): ILLEGAL REQUEST asc:24,0
(probe4:ahc0:0:4:0): Invalid field in CDB
ahc0: target 4 synchronous at 8.0MHz, offset = 0xf
ahc0: target 1 using 16bit transfers
ahc0: target 1 synchronous at 20.0MHz, offset = 0x8
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 20.0MHz, offset = 0x8
Creating DISK da0
Creating DISK da1
Creating DISK cd0
pass0 at ahc0 bus 0 target 0 lun 0
pass0: <SEAGATE ST34572W 0784> Fixed Direct Access SCSI-2 device
pass0: Serial Number JK2240150WDXWN
pass0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
pass1 at ahc0 bus 0 target 1 lun 0
pass1: <SEAGATE ST34572W 0876> Fixed Direct Access SCSI-2 device
pass1: Serial Number JK6238820S2XRJ
pass1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
pass2 at ahc0 bus 0 target 4 lun 0
pass2: <NEC CD-ROM DRIVE:222 3.0k> Removable CD-ROM SCSI-2 device
pass2: 8.064MB/s transfers (8.064MHz, offset 15)
Mounting root from ufs:/dev/da0s1a
da1 at ahc0 bus 0 target 1 lun 0
da1: <SEAGATE ST34572W 0876> Fixed Direct Access SCSI-2 device
da1: Serial Number JK6238820S2XRJ
da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 4340MB (8888924 512 byte sectors: 64H 32S/T 4340C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST34572W 0784> Fixed Direct Access SCSI-2 device
da0: Serial Number JK2240150WDXWN
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 4340MB (8888924 512 byte sectors: 64H 32S/T 4340C)
da0s1: type 0xa5, start 0, end = 8888923, size 8888924 : OK
start_init: trying /sbin/init
da1s1: type 0xa5, start 0, end = 8888923, size 8888924 : OK
da1s1: type 0xa5, start 0, end = 8888923, size 8888924 : OK
cd0 at ahc0 bus 0 target 4 lun 0
cd0: <NEC CD-ROM DRIVE:222 3.0k> Removable CD-ROM SCSI-2 device
cd0: 8.064MB/s transfers (8.064MHz, offset 15)
cd0: cd present [312698 x 2048 byte records]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
