On 2010-06-20 21:03:51 (+0900), Norikatsu Shigemura <[email protected]> wrote: > On Sun, 13 Jun 2010 22:13:31 +0200 > Kristof Provost <[email protected]> wrote: > > > I have a OpenRD Ultimate, which has two GbE ports - if_mge(4). But > > > I couldn't use mge1 like following. So I tried to investigate. > > > - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - > > > - - - - - - - - > > > Jun 13 05:02:14 sidearms kernel: mge1: watchdog timeout > > > Jun 13 05:02:14 sidearms kernel: mge1: Timeout on link-up > > > - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - > > > - - - - - - - - > > I believe the mge(4) driver incorrectly configures the PHY address for > > the second interface. Can you give the attached patch a try? > > Thank you. I think so, too. And, by FDT, I suggest following > patch. > > - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - > - - - - - - > /* Tell the MAC where to find the PHY so autoneg works */ > - miisc = LIST_FIRST(&sc->mii->mii_phys); > - MGE_WRITE(sc, MGE_REG_PHYDEV, miisc->mii_phy); > + MGE_WRITE(sc, MGE_REG_PHYDEV, sc->phyaddr); > - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - > - - - - - - > I think that's correct, but I haven't been able to test it on my board yet. Does this work for you on a board with two GbE ports? If so I'll try to get someone to commit it.
Regards, Kristof _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[email protected]"
