Am 14.09.2010 um 11:35 schrieb Adrian Chadd: > Hi everyone, > > I've just pushed the initial support for the AR9100 wireless MAC into > my git repository. This is for the WMAC on the AR9132 SoC. > > I've tested it in 11bg hostap mode on an AP83 derived box - the > TP-Link TL-WR1043ND. The source tree has support for the CPU, ethernet > (but not the switch PHY; it's enough to get data across it!); flash > and the AR9100 WMAC. > > I've only tested "open" hostap mode on 11bg on a fixed channel. > > The GIT repo is at: > http://www.gitorious.org/~adrianchadd/freebsd/adrianchadd-freebsd ; > it's the "work/atheros" branch. You'll need to open the unit up, > solder on some pins to get to the serial port and acquire a TTL -> > RS232 level converter. There's pictures and howto on the OpenWRT wiki: > http://wiki.openwrt.org/toh/tp-link/tl-wr1043nd
That sounds really nice! Is there some guide on how to prepare an image? I'm quite familiar with OpenWrt (patching and building) and have a number of routers (WRT-160N, WR941NL, 500gP) with serial adapters attached, but from the messages on the mips list, it felt the bootstrapping process might be a bit dauting... Stefan -- Stefan Bethke <s...@lassitu.de> Fon +49 151 14070811 _______________________________________________ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
