I've got a laptop that is using one of these lovely little buggers,
but not with -current. I recently upgraded to the 4.0-20000227
snapshot but to my disappointment, the card is not listed in
pccard.conf. Previously I was running 3.2-PAO, and the card worked
just fine. It is an ed0/NE2000 compliant card, and I think the
pccard.conf entry should look like the pccard.conf attachment.
I've also included the pccardd dumpcis information for the card
for someone to take a look at.
When I insert the card with the attached pccard.conf it reports:
<date> eric3 /kernel: pccard: card inserted, slot 0
<date> eric3 pccardd[44]: No card in database for "RPTI"<"EP401 Ethernet NE2000
Compatible")
When I insert the card with the standard pccard.conf it reports the same.
(I had it printing out "No card in database for ""("")" once, but
I forgot what I did.)
The line from my kernel config looks like this:
device ed0 at isa? port 0x320 irq 9 iomem 0xd8000
Any pointers?
--
Eric Hodel - [EMAIL PROTECTED] - http://segment7.net
"If you understand what you're doing, you're not learning anything."
-- A. L.
io 0x240-0x360
irq 3 9 10 11 13 15
memory 0xd4000 96k
card "RPTI" "EP401 Ethernet NE2000 Compatible"
config 0x21 "ed0" 9
insert logger -t pccard: -s RPTI EP401 inserted
insert /etc/pccard_ether
remove logger -t pccard: -s RPTI EP401 removed
remove /sbin/ifconfig delete
Configuration data for card in slot 1
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
000: dc 00 ff
Common memory device information:
Device number 1, type Function specific, WPS = ON
Speed = 100nS, Memory block size = 512b, 1 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 3
000: 49 00 ff
Attribute memory device information:
Device number 1, type EEPROM, WPS = ON
Speed = 250nS, Memory block size = 512b, 1 units
Tuple #3, code = 0x15 (Version 1 info), length = 57
000: 04 01 52 50 54 49 00 45 50 34 30 31 20 45 74 68
010: 65 72 6e 65 74 20 4e 45 32 30 30 30 20 43 6f 6d
020: 70 61 74 69 62 6c 65 00 00 00 00 00 00 00 00 00
030: 00 00 00 00 00 00 00 00 ff
Version = 4.1, Manuf = [RPTI],card vers = [EP401 Ethernet NE2000 Compatible]
Addit. info = [],[],[],[],[],[],[],[],[],[],[],[],[],[],[],[]
Tuple #4, code = 0x13 (Link target), length = 3
000: 43 49 53
Tuple #5, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #6, code = 0x1a (Configuration map), length = 5
000: 01 23 f8 03 03
Reg len = 2, config register addr = 0x3f8, last config = 0x23
Registers: XX------
Tuple #7, code = 0x1b (Configuration entry), length = 17
000: e0 81 1d 3f 55 4d 5d 06 86 46 26 fc 24 65 30 ff
010: ff
Config index = 0x20(default)
Interface byte = 0x81 (I/O) wait signal supported
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Minimum operating supply voltage: 4.5 x 1V
Maximum operating supply voltage: 5.5 x 1V
Continuous supply current: 1 x 100mA
Max current average over 1 second: 1 x 100mA, ext = 0x46
Max current average over 10 ms: 2 x 100mA
Wait scale Speed = 1.5 x 10 us
Card decodes 4 address lines, 8 Bit I/O only
IRQ modes: Level
IRQ level = 4
Tuple #8, code = 0x1b (Configuration entry), length = 7
000: 20 08 ca 60 00 03 1f
Config index = 0x20
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x300 block length = 0x20
Tuple #9, code = 0x1b (Configuration entry), length = 7
000: 21 08 ca 60 20 03 1f
Config index = 0x21
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x320 block length = 0x20
Tuple #10, code = 0x1b (Configuration entry), length = 7
000: 22 08 ca 60 40 03 1f
Config index = 0x22
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x340 block length = 0x20
Tuple #11, code = 0x1b (Configuration entry), length = 7
000: 23 08 ca 60 60 03 1f
Config index = 0x23
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x360 block length = 0x20
Tuple #12, code = 0xff (Terminator), length = 0
2 slots found
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-20000227-CURRENT #0: Sun Feb 27 19:07:15 PST 2000
[EMAIL PROTECTED]:/usr/src/sys/compile/LAPTOP
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P54C (132.96-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping = 12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 41943040 (40960K bytes)
avail memory = 38047744 (37156K bytes)
Preloaded elf kernel "kernel" at 0xc0297000.
Intel Pentium detected, installing workaround for F00F bug
npx0: <math processor> on motherboard
npx0: INT 16 interface
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.1, connected at v1.1
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
chip1: <PCI to Other bridge (vendor=8086 device=1234)> at device 1.0 on pci0
pci0: <NeoMagic model 0001 VGA-compatible display device> at 2.0 irq 15
pcic-pci0: <Cirrus Logic PD6729/6730 PC-Card Controller> port 0x3e0-0x3e3 at device
4.0 on pci0
isa0: <ISA bus> on motherboard
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
pcic: management irq 10
pcic0: <Cirrus Logic PD672X> at port 0x3e0 iomem 0xd0000 irq 10 on isa0
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sbc0: <ESS 688> at port 0x220-0x22f irq 5 drq 1 on isa0
pcm0: <SB DSP 3.01 (ESS mode)> on sbc0
ad0: 2067MB <IBM-DTNA-22160> [4200/16/63] at ata0-master using BIOSPIO
Mounting root from ufs:/dev/ad0s2a
