I have recently "upgraded" to current (5.0) and am finding that with the new ATAPI/IDE
driver I am getting filesystem inconsistencies regularly :( This manifests itself
with
fsck
complaining profusely after a crash. The machine has hung _hard_ a couple of times,
and upon reboot fsck complains generally about DUP/BAD inodes (lots of them) as well as
bad hard link/directory entries. This is cause for concern - with the wd driver none
of these problems existed. I have now mounted / and /usr sync to see whether that
makes any difference ; my gut feel however is that the new driver may have some bugs
that we still need to find.
I have attached the output of dmesg (verbose boot) for anyone that is interested. I
will
try and get a kernel debug dump with any future crashes.
Cheers
Tim.
--
====================================================================
Tim Liddelow * Firewalls / Security
OneGuard Technical Lead * * Electronic Commerce
eSec Pty Ltd *
Phone: +61 3 8341 2463 C++/UNIX/WIN32/OOP/OOD
mailto:[EMAIL PROTECTED] * http://www.oneguard.com/
=====================================================================
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #4: Thu Mar 16 11:26:53 EST 2000
[EMAIL PROTECTED]:/usr/src/sys/compile/FELINE
Calibrating clock(s) ... TSC clock: 350808053 Hz, i8254 clock: 1193225 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: AMD-K6(tm) 3D processor (350.80-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
Data TLB: 128 entries, 2-way associative
Instruction TLB: 64 entries, 1-way associative
L1 data cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
L1 instruction cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
Write Allocate Enable Limit: 128M bytes
Write Allocate 15-16M bytes: Enable
real memory = 134152192 (131008K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00344000 - 0x07fe7fff, 130695168 bytes (31908 pages)
avail memory = 126734336 (123764K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fb030
bios32: Entry = 0xfb4b0 (c00fb4b0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xb4e0
pnpbios: Found PnP BIOS data at 0xc00fc110
pnpbios: Entry = f0000:c138 Rev = 1.0
Other BIOS signatures found:
ACPI: 000f81e0
Preloaded elf kernel "kernel" at 0xc032b000.
md0: Malloc disk
Creating DISK md0
pci_open(1): mode 1 addr port (0x0cf8) is 0x80003840
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=05971106)
npx0: <math processor> on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 768639508 bytes/sec
bzero() bandwidth = 205549845 bytes/sec
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=05971106)
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x1106, dev=0x0597, revid=0x04
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base e0000000, size 26
found-> vendor=0x1106, dev=0x8598, revid=0x00
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x1106, dev=0x0586, revid=0x47
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1106, dev=0x0571, revid=0x06
class=01-01-8a, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000e400, size 4
found-> vendor=0x1106, dev=0x3040, revid=0x10
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x5333, dev=0x8901, revid=0x16
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base e4000000, size 26
found-> vendor=0x10b8, dev=0x0005, revid=0x06
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 0000e800, size 8
map[14]: type 1, range 32, base ea000000, size 12
found-> vendor=0x1274, dev=0x5000, revid=0x00
class=04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base 0000ec00, size 6
pci0: <PCI bus> on pcib0
pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <VIA 82C586 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C586 ATA33 controller> port 0xe400-0xe40f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xe400
ata0: mask=03 status0=50 status1=10
ata0: mask=03 status0=50 status1=10
ata0: devices = 0x9
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xe408
ata1: mask=03 status0=50 status1=50
ata1: mask=03 status0=50 status1=50
ata1: devices = 0x3
ata1: at 0x170 irq 15 on atapci0
pcib2: <PCI to PCI bridge (vendor=1106 device=3040)> at device 7.3 on pci0
pci0: <S3 Trio 64V2/DX/GX graphics accelerator> (vendor=0x5333, dev=0x8901) at 8.0 irq
10
tx0: <SMC 83c170> port 0xe800-0xe8ff mem 0xea000000-0xea000fff irq 11 at device 9.0 on
pci0
tx0: address 00:e0:29:09:4b:00, type SMC9432TX, Auto-Neg 100Mbps FDbpf: tx0 attached
tx0: driver is using old-style compatability shims
pcm0: <AudioPCI ES1370> port 0xec00-0xec3f irq 5 at device 10.0 on pci0
pcm: setmap 1000, 10000; 0xc7bca000 -> 1000
pcm: setmap 11000, 10000; 0xc7bda000 -> 11000
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
devclass_alloc_unit: ata0 already exists, using next available unit number
devclass_alloc_unit: ata1 already exists, using next available unit number
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: status 10 00 64
psm: data 08 00 00
psm: status 00 02 64
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
isa_probe_children: probing PnP devices
BIOS Geometries:
0:033dfe3f 0..829=830 cylinders, 0..254=255 heads, 1..63=63 sectors
1:020f1f3f 0..527=528 cylinders, 0..31=32 heads, 1..63=63 sectors
2:03fe3f3f 0..1022=1023 cylinders, 0..63=64 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: sl0 attached
bpf: ppp0 attached
new masks: bio 4008c040, tty 400310ba, net 400718ba
bpf: lo0 attached
ata0-master: success setting up UDMA2 mode on VIA chip
ad0: <QUANTUM FIREBALL SE6.4A/API.0C00> ATA-3 disk at ata0 as master
ad0: 6149MB (12594960 sectors), 13328 cyls, 15 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
Creating DISK ad0
Creating DISK wd0
ata1-master: success setting up WDMA2 mode on VIA chip
ad2: <QUANTUM FIREBALL540A/A1M.0900> ATA-0 disk at ata1 as master
ad2: 519MB (1064448 sectors), 1056 cyls, 16 heads, 63 S/T, 512 B/S
ad2: 8 secs/int, 1 depth queue, WDMA2
ad2: piomode=4 dmamode=2 udmamode=-1 cblid=0
Creating DISK ad2
Creating DISK wd2
ata1-slave: success setting up WDMA2 mode on VIA chip
ad3: <NEC Corporation DSE2100A/5DD0314> ATA-0 disk at ata1 as slave
ad3: 2014MB (4124736 sectors), 4092 cyls, 16 heads, 63 S/T, 512 B/S
ad3: 16 secs/int, 1 depth queue, WDMA2
ad3: piomode=4 dmamode=2 udmamode=-1 cblid=0
Creating DISK ad3
Creating DISK wd3
ata0-slave: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata0-slave: success setting up PIO4 mode on generic chip
acd0: <CD-ROM 48X/AKU/T30> CDROM drive at ata0 as slave
acd0: 128KB buffer, PIO4
acd0: Reads: CD-DA stream
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 0, end = 12594959, size 12594960 : OK
start_init: trying /sbin/init
ad2s1: type 0xa5, start 0, end = 1064447, size 1064448 : OK
ad3s1: type 0xa5, start 0, end = 4124735, size 4124736 : OK
ad2s1: type 0xa5, start 0, end = 1064447, size 1064448 : OK
ad3s1: type 0xa5, start 0, end = 4124735, size 4124736 : OK
Linux-ELF exec handler installed
