Maxim Didenko wrote:
>
> Hello everybody,
>
> I try to install FreeBSD 4.0-RELEASE on Dell PowerEdge SP 5100 with
> integrated PCI SCSI NCR controller (chip label is "Symbols Logic
> 53C810a 609-0392140 DR00218 9627N"). At boot time controller outputs
> "NCR SDMS (TM) v3.0 PCI SCSI BIOS PCI Rev. 2.0 NCRPCI-3.07.02".
> After loading kernel and MFS root diskettes, kernel tries to load
> driver for SCSI controller but forever loop begins with following
> messages:
> (noperiph:sym0:0:-1:-1): SCSI BUS reset detected
> sym0:0:ERROR (C0:0) (8-0-0) (0/3) @ (script 138:80080000).
> sym0: script cmd=720d0000
> sym0: regdump: ca 00 00 03 47 00 1f 00 08 07 00 08 00 08 02 00 08 ee
> 02 20 ff ff ff.
> sym0: PCI STATUS=0x8100
Did you try to use the ncr driver too ?
My /sys/i386/conf/LINT says :
device ncr # NCR/Symbios Logic
device sym # NCR/Symbios Logic (newer chipsets)
and the 53C810 is a rather old beast ...
--
UNIX *IS* user friendly. It's just selective about who its friends are.
--unknown
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message