At 10:53 PM 4/6/2000 -0400, Matthew N. Dodd wrote:
>I've just updated the DPT PCI front end to be 'newbus' compliant but lack
>the hardware to test my changes. It should work just fine but I'd
>appriciate a quick 'it works!' from someone with hardware just to be sure.
It hangs here :(
the boot gets to:
dpt0 <DPT Caching SCSI RAID Controller> port 0xff80-0xff9f irq 16 at device11.0 on pci0
and just stalls.
The controller is a DPT PM2124 with 2 4gig seagate drives in a RAID 1 setup.
The motherboard is an Intel PR440FX Dual pentium pro with 2 200mhz cpu's
I can't get to the debugger it just freezes.
I removed the line options COMPAT_OLDPCI
from my config file before I built the kernel that doesn't work
Here is what comes up an my old kernel:
dpt0: <DPT Caching SCSI RAID Controller> port 0xff80-0xff9f irq 16 at device 11.0 on
pci0
dpt0: DPT PM2124A/9X-R FW Rev. 07CK, 1 channel, 64 CCBs
dpt0: driver is using old-style compatability shims
Manfred
=====================
|| [EMAIL PROTECTED] ||
|| Ph. (415) 681-6235 ||
=====================
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
