on 21/01/2014 11:35 Andrey V. Elsukov said the following:
> On 20.01.2014 23:32, Thomas Hoffmann wrote:
>> I am running 11.0-CURRENT (r260850) with zfs on root with MBR.
>> After upgrading my 10.0-RELEASE (r260669) system to 11.0-CURRENT (r260850)
>> my zpools reported that they needed to be upgraded. So, I upgraded my
>> zpools and I am attempting to update the bootcode (as required). I managed
>> to get the boot1 stage code updated, but cannot get the boot2 stage code
>> updated. Here is what I have done:
>> # sysctl kern.geom.debugflags=0x10
>> kern.geom.debugflags: 0 -> 16
>> # dd if=/boot/zfsboot of=/tmp/zfsboot1 count=1
>> 1+0 records in
>> 1+0 records out
>> 512 bytes transferred in 0.014996 secs (34142 bytes/sec)
>> # gpart bootcode -b /tmp/zfsboot1 /dev/ada0s1
>> bootcode written to ada0s1
>> # dd if=/boot/zfsboot of=/dev/ada0s1a skip=1 seek=1024
>> dd: /dev/ada0s1a: Operation not permitted
>> The final dd statement fails with "operation not permitted". In all my
>> research, understood the initial sysctl command I ran would prevent this
>> particular error from happening.
>> What do I need to do to get the boot2 code written to /dev/ada0s1a?
> This will work only if ada0s1a isn't in use. The debugflags trick works
> only for whole disk, i.e. for geoms with rank=1. Another way is
> calculate needed offset and write bootcode directly to ada0.
And ultimately we should extend our ZFS interface with an ioctl to write a blob
to a boot code area of a specified ZFS leaf vdev. This would the right way to
firstname.lastname@example.org mailing list
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"