Hello, ada2: <PLEXTOR PX-128M5S 1.05> ATA-8 SATA 3.x device ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
need tuning? or change SSD? motherboard gigabyte z87mx-d3h all ports SATA-3, port change does not change the situation hdd SATA-3 recognized correctly ada3: <WDC WD30EZRX-00D8PB0 80.00A80> ATA-9 SATA 3.x device ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) another ssd ada2: <Corsair Neutron SSD M206> ATA-8 SATA 3.x device ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) if disconnect ssd pr 17 14:07:08 desktop kernel: ahcich3: DISCONNECT requested Apr 17 14:07:08 desktop kernel: ahcich3: AHCI reset... Apr 17 14:07:08 desktop kernel: ahcich3: SATA connect timeout time=10000us status=00000000 Apr 17 14:07:08 desktop kernel: ahcich3: AHCI reset: device not found Apr 17 14:07:08 desktop kernel: pass3 at ahcich3 bus 0 scbus3 target 0 lun 0 Apr 17 14:07:08 desktop kernel: pass3: <PLEXTOR PX-128M5S 1.05> s/n P02411112921 detached Apr 17 14:07:08 desktop kernel: ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 Apr 17 14:07:08 desktop kernel: ada3: <PLEXTOR PX-128M5S 1.05> s/n P02411112921 detached Apr 17 14:07:08 desktop kernel: (pass3:ahcich3:0:0:0): Periph destroyed Apr 17 14:07:08 desktop kernel: (ada3:ahcich3:0:0:0): Periph destroyed Apr 17 14:07:18 desktop kernel: ahcich3: CONNECT requested Apr 17 14:07:18 desktop kernel: ahcich3: AHCI reset... Apr 17 14:07:18 desktop kernel: ahcich3: SATA connect time=8000us status=00000133 Apr 17 14:07:18 desktop kernel: ahcich3: AHCI reset: device found Apr 17 14:07:18 desktop kernel: ahcich3: AHCI reset: device ready after 0ms Apr 17 14:07:18 desktop kernel: ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 Apr 17 14:07:18 desktop kernel: GEOM: new disk ada3 Apr 17 14:07:18 desktop kernel: ada3: <PLEXTOR PX-128M5S 1.05> ATA-8 SATA 3.x device Apr 17 14:07:18 desktop kernel: ada3: Serial Number P02411112921 Apr 17 14:07:18 desktop kernel: ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) Apr 17 14:07:18 desktop kernel: ada3: Command Queueing enabled Apr 17 14:07:18 desktop kernel: ada3: 122104MB (250069680 512 byte sectors: 16H 63S/T 16383C) Apr 17 14:07:18 desktop kernel: ada3: Previously was known as ad10 Apr 17 14:07:18 desktop kernel: pass3 at ahcich3 bus 0 scbus3 target 0 lun 0 Apr 17 14:07:18 desktop kernel: pass3: <PLEXTOR PX-128M5S 1.05> ATA-8 SATA 3.x device Apr 17 14:07:18 desktop kernel: pass3: Serial Number P02411112921 Apr 17 14:07:18 desktop kernel: pass3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) Apr 17 14:07:18 desktop kernel: pass3: Command Queueing enabled # uname -a FreeBSD desktop.local 11.0-CURRENT FreeBSD 11.0-CURRENT #0 r263932: Sun Mar 30 15:43:01 MSK 2014 root@desktop.local:/usr/obj/usr/src/sys/MY_DES amd64 _______________________________________________ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
