On , Michael Jung wrote:
Hi:
If there is a better list to post this to please let me know.
I've started playing with VT and gallium. I boot on ZFS but have a UFS
drive
and swap partition. Anyone with idea's why I'm not getting any crash
info?
I am guessing it is because the machine is not rebooting but locks up
hard so
is there any extra debugging that can be turned on?
On the surface Gallium seems to be the root of the problem.
Here is my dump/swap config:
FreeBSD charon 10.0-STABLE FreeBSD 10.0-STABLE #0 r265914M: Wed May 14
15:44:17 EDT 2014 mikej@charon:/usr/obj/usr/src/sys/VT amd64
root@charon:/usr/home/mikej # swapinfo
Device 1K-blocks Used Avail Capacity
/dev/ada2s1a 16777216 0 16777216 0%
root@charon:/usr/home/mikej #
root@charon:/usr/home/mikej # dumpon -l
ada2s1a
root@charon:/usr/home/mikej #
root@charon:/usr/home/mikej # grep dump /etc/rc.conf
dumpdev="AUTO" # Device to crashdump to (device name, AUTO,
or NO).
dumpdir="/data/crash" # Directory where crash dumps are to be stored
root@charon:/usr/home/mikej #
root@charon:/usr/home/mikej # ls -lad /data/crash/
drwxr-xr-x 2 root wheel 512 Apr 20 13:15 /data/crash/
root@charon:/usr/home/mikej #
http://216.26.158.189/Xorg.0.log
--mikej
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to
"freebsd-current-unsubscr...@freebsd.org"
OK another crash today and the machine did reboot but still nothing in
/data/crash
[mikej@charon ~]$ gpart list ada2
Geom name: ada2
modified: false
state: OK
fwheads: 16
fwsectors: 63
last: 3907029167
first: 63
entries: 4
scheme: MBR
Providers:
1. Name: ada2s1
Mediasize: 2000398901760 (1.8T)
Sectorsize: 512
Stripesize: 0
Stripeoffset: 32256
Mode: r2w2e3
rawtype: 165
length: 2000398901760
offset: 32256
type: freebsd
index: 1
end: 3907029167
start: 63
Consumers:
1. Name: ada2
Mediasize: 2000398934016 (1.8T)
Sectorsize: 512
Mode: r2w2e5
[mikej@charon ~]$ ls /dev/ada2
ada2 ada2s1 ada2s1a ada2s1b
[mikej@charon ~]$ ls /dev/ada2
I simply must just not understand something that is fundamental here.
If I get this right swap is a slice ada2s1b, not a partition which
should be fine for core dumps right? On reboot dumps to swap are not
being wrote to /data/dump!
If UFS is dirty and auto-fsck runs - is this an issue?
I obviously don't get something. Please someone enlighten me ;-)
Regards,
--mikej
Michael Jung
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
