Originally cvsup'd and made world successfully on the 30th and found
the following problems to occur. Cvsup'ing to a new -current and a new
kernel still sees the same things occurring.

        Everything's detected at boot time hassle free (printer, sound, network
card) so I have no idea what the PNP info stuff is in dmesg. I've got an
Intel SunRiva M/B w/ the onboard TNT + ES1371 (detected correctly as can
be seen) and a PCI ethernet card - nothing else is plugged in to the

        I've mentioned the ldconfig segfault problem as I'm under suspicion I
have to do something extra (other than make world) to update the Linux
kernel modules? Note, kldload/unload of linux.ko works hassle free - as
soon as /usr/sbin/linux is executed from rc.i386,
/compat/linux/sbin/ldconfig is exec'd and cores. I'll re-compile with
debugging if requested.

FreeBSD breaker.org 5.0-CURRENT FreeBSD 5.0-CURRENT #0: Wed May  3
05:20:41 WST 2000     root@:/usr/src/sys/compile/breaker_02May2000  i386

        Thanks in advance.


Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Wed May  3 05:20:41 WST 2000
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (232.79-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x633  Stepping = 3
real memory  = 66977792 (65408K bytes)
avail memory = 60973056 (59544K bytes)
Preloaded elf kernel "kernel" at 0xc0346000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva TNT graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xffa0-0xffaf at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xef80-0xef9f irq 10 at device 
7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x440-0x44f at device 7.3 on 
pcm0: <AudioPCI ES1371> port 0xef00-0xef3f irq 9 at device 12.0 on pci0
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> port 0xee80-0xeebf mem 
0xfea00000-0xfeafffff,0xfebff000-0xfebfffff irq 9 at device 14.0 on pci0
fxp0: Ethernet address 00:04:ac:53:46:dd
fxp0: supplying EUI64: 00:04:ac:ff:fe:53:46:dd
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: IEEE1284 device found /NIBBLE
Probing for PnP devices on ppbus0:
ppbus0: <Canon BJC-265SP/1.00> PRINTER BJ,LQ,BJL,BJRaster,BSCC
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
unknown0: <PNP0c01> at iomem 
 on isa0
unknown1: <PNP0c01> at iomem 0x100000-0x3fdffff on isa0
unknown: <PNP0000> can't assign resources
unknown2: <PNP0200> at port 0-0xf,0x80-0x90,0x94-0x9f,0xc0-0xde drq 4 on isa0
unknown3: <PNP0100> at port 0x40-0x43 irq 0 on isa0
unknown4: <PNP0b00> at port 0x70-0x71 irq 8 on isa0
unknown: <PNP0303> can't assign resources
unknown5: <PNP0800> at port 0x61 on isa0
unknown6: <PNP0c04> at port 0xf0-0xff irq 13 on isa0
unknown7: <PNP0c02> at port 
 on isa0
unknown8: <PNP0c02> at port 0x290-0x297,0x370-0x371 on isa0
unknown: <PNP0501> can't assign resources
unknown9: <PNP0c02> on isa0
unknown: <PNP0400> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown10: <PNP0a03> on isa0
ad0: 8063MB <QUANTUM FIREBALL CR8.4A> [16383/16/63] at ata0-master using UDMA33
ad1: 3079MB <QUANTUM FIREBALL ST3.2A> [6256/16/63] at ata0-slave using UDMA33
acd0: CD-RW <Hewlett-Packard CD-Writer Plus 8200> at ata1-master using WDMA2
acd1: CDROM <CD-524E> at ata1-slave using PIO3
Mounting root from ufs:/dev/ad0s1a
WARNING: run /dev/MAKEDEV before 2000-06-01 to get rid of block devices
pid 159 (ldconfig), uid 0: exited on signal 11 (core dumped)
# $FreeBSD: src/sys/i386/conf/Breaker_30Apr2000 breaker Exp $

machine         i386
cpu             I686_CPU
ident           breaker
maxusers        512
options         MATH_EMULATE            #Support for x87 emulation
options         INET                    #InterNETworking
options         INET6                   #IPv6 communications protocols
options         FFS                     #Berkeley Fast Filesystem
options         FFS_ROOT                #FFS usable as root device [keep this!]
options         MFS                     #Memory Filesystem
options         MD_ROOT                 #MD is a potential root device
options         NFS                     #Network Filesystem
options         NFS_ROOT                #NFS usable as root device, NFS required
options         MSDOSFS                 #MSDOS Filesystem
options         CD9660                  #ISO 9660 Filesystem
options         CD9660_ROOT             #CD-ROM usable as root, CD9660 required
options         PROCFS                  #Process filesystem
options         COMPAT_43               #Compatible with BSD 4.3 [KEEP THIS!]
options         SCSI_DELAY=15000        #Delay (in ms) before probing SCSI
options         UCONSOLE                #Allow users to grab the console
options         USERCONFIG              #boot -c editor
options         VISUAL_USERCONFIG       #visual boot -c editor
options         KTRACE                  #ktrace(1) support
options         SYSVSHM                 #SYSV-style shared memory
options         SYSVMSG                 #SYSV-style message queues
options         SYSVSEM                 #SYSV-style semaphores
options         P1003_1B                #Posix P1003_1B real-time extensions
options         ICMP_BANDLIM            #Rate limit bad replies
device          isa
device          eisa
device          pci
device          fdc0    at isa? port IO_FD1 irq 6 drq 2
device          fd0     at fdc0 drive 0
device          ata0    at isa? port IO_WD1 irq 14
device          ata1    at isa? port IO_WD2 irq 15
device          ata
device          atadisk                 # ATA disk drives
device          atapicd                 # ATAPI CDROM drives
options         ATA_STATIC_ID           #Static device numbering
options         ATA_ENABLE_ATAPI_DMA    #Enable DMA on ATAPI devices
options         SOFTUPDATES
device          atkbdc0 at isa? port IO_KBD
device          atkbd0  at atkbdc? irq 1
device          psm0    at atkbdc? irq 12
device          vga0    at isa?
device          pcm
pseudo-device   splash
device          sc0     at isa?
device          npx0    at nexus? port IO_NPX irq 13
device          apm0    at nexus? disable flags 0x20 # Advanced Power Management
device          sio0    at isa? port IO_COM1 flags 0x10 irq 4
device          ppc0    at isa? irq 7
device          ppbus           # Parallel port bus (required)
device          lpt             # Printer
device          fxp             # Intel EtherExpress PRO/100B (82557, 82558)
pseudo-device   loop            # Network loopback
pseudo-device   ether           # Ethernet support
pseudo-device   sl      1       # Kernel SLIP
pseudo-device   ppp     1       # Kernel PPP
pseudo-device   tun             # Packet tunnel.
pseudo-device   pty             # Pseudo-ttys (telnet etc)
pseudo-device   md              # Memory "disks"
pseudo-device   gif     4       # IPv6 and IPv4 tunneling
pseudo-device   faith   1       # IPv6-to-IPv4 relaying (translation)
pseudo-device   bpf             # Berkeley packet filter
device          uhci            # UHCI PCI->USB interface
device          ohci            # OHCI PCI->USB interface
device          usb             # USB Bus (required)
device          ugen            # Generic

Reply via email to