Hi Ed, thanks for the reply I tested the last available memstick (r277486) of CURRENT to install FreeBSD, but it didn't finish the boot process. The boot process hangs after showing the framebuffer information ( bi_load_efi_data() in bootinfo.c).
I'm using a DVI monitor with a mini-HDMI<->DVI cable. With a very hold DVI monitor I cannot see anything. Then I moved to a recent DVI monitor, but it hanged as well. Then I recompiled CURRENT (updated to Thursday) and added several printf to the EFI section (both boot1.efi and loader.efi). I also updated the UEFI of the board to the most recent one, without luck. I'll come back on Wednesday, I'll recompile everything removing all my printf and let's see what happen. Is the display so relevant? Thanks again for the help, it's really appreciated! Best regards, pizzamig On 1/30/15, Ed Maste <ema...@freebsd.org> wrote: > On 30 January 2015 at 12:35, Ed Maste <ema...@freebsd.org> wrote: >> >> I built a plain -current USB stick image a while back and had no >> trouble, when using the HDMI output. I don't recall the revision at >> the moment, but will try again soon. Serial console won't work because >> the UARTs are not quite 16550-compatible. > > I just checked on a build at r277612 (a week old) and had no trouble. > > For reference the not-yet-working UARTs are: > > none7@pci0:0:30:3: class=0x078000 card=0x72708086 chip-0x0f0a8086 > rev=0x0c hdr=0x00 > vendor = 'Intel Corporation' > device = 'ValleyView LPIO1 HSUART Controller' > class = simple comms > none8@pci0:0:30:4: class=0x078000 card=0x72708086 chip-0x0f0c8086 > rev=0x0c hdr=0x00 > vendor = 'Intel Corporation' > device = 'ValleyView LPIO1 HSUART Controller' > class = simple comms > -- --------------------- _______________________________________________ firstname.lastname@example.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"