On Mon, Mar 30, 2015 at 10:49 AM, Garrett Cooper <yaneurab...@gmail.com>
> > On Mar 30, 2015, at 10:38, bsdml <pietro.bs...@gmail.com> wrote:
> > Hey wolfgang,
> > thanks for getting back to me. Adding hint.ata.1.disabled="1" in
> /boot/device.hints indeed did the trick and allowed me to boot both 10.1
> and 11-CURRENT, however this workaround has temporary solved my problem but
> brings up to another headache. I have planned to get a bay caddy and swap
> the cdrom drive with a 7.200 rpm SATA hdd, but doing this way disabling the
> second SATA channel I will be unable to achieve such a thing.
> > Is there a chance that the bay caddy ATA will work without the need to
> disable the second ATA channel?
> Has a bug been filed for this issue?
> It's not been fixed and is pretty much unfixable, but it is also only
The problem shows up when because the SATA-PATA converter shows the second
drive as present whether it is or not. This leads the driver to try to
probe the drive. The probe of the non-existant fails. (Gee, what a
If you don't have a second PATA drive in hte system, you need to disable
this drive to prevent the probe. If you have a second drive, you only need
to enable it and it works. At least my second drive did on my old T42. I
can only hope the T40 is the same. IF you can get the PATA caddy, try
finding a drive to plug in and see if it works at all. I suspect that it
Be aware that old PATA drives are getting harder to come by. Most are
pretty small, though I did find a 360 GB drive on Amazon.
Kevin Oberman, Network Engineer, Retired
firstname.lastname@example.org mailing list
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"