FreeBSD_HEAD-tests - Build #1179 - Still Failing:

Build information:
Full change log:
Full build log:

Change summaries:

No changes

The end of the build log:

Started by upstream project "Build_Image_and_Run_Tests_in_Bhyve_HEAD" build 
number 1237
originally caused by:
 Started by upstream project "FreeBSD_HEAD" build number 2961
 originally caused by:
  Started by an SCM change
Building remotely on (FreeBSD-CURRENT-baremetal) in 
workspace /builds/FreeBSD_HEAD-tests
No emails were triggered.
[FreeBSD_HEAD-tests] $ /bin/sh -xe /tmp/
+ sudo python /vm/freebsd-ci/scripts/test/ -f 
bridge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        ether 02:27:d1:9a:45:01
        inet netmask 0xffffff00 broadcast 
        nd6 options=1<PERFORMNUD>
        groups: bridge 
        id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
        maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
        root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
        member: tap10 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
                ifmaxaddr 0 port 10 priority 128 path cost 2000000
        member: tap11 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
                ifmaxaddr 0 port 9 priority 128 path cost 2000000
tap10: flags=8902<BROADCAST,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        ether 00:bd:bf:03:5d:0a
        media: Ethernet autoselect
        status: no carrier
        groups: tap 
['ifconfig', u'bridge1']

bhyveload -m 2G -d 
Consoles: userboot  

FreeBSD/amd64 User boot, Revision 1.1
(, Sat Mar  7 06:40:36 UTC 2015)
  ```                        `s` `.....---.......--.```   
-/+o   .--`         /y:`      +. yo`:.            :o      
`+-  y/               -/`   -o/ .-                  
::/sy+:. /                     `--  /`:                         
 :``:                          :` /                          
/ .-                        -.  --                      
-.   `:`                  `:`     .--             `--.  
      .---.....----./-\|  ______               ____   _____ _____  
|  ____|             |  _ \ / ____|  __ \ | |___ _ __ ___  ___ | 
|_) | (___ | |  | ||  ___| '__/ _ \/ _ \|  _ < \___ \| |  | || |   
| | |  __/  __/| |_) |____) | |__| || |   | | |    |    ||     
 |      |      ||_|   |_|  \___|\___||____/|_____/|_____/ 
 to FreeBSD1 .Boot Multi User [Enter]2 
.Boot [S]ingle User3 .[Esc]ape to loader 
prompt4 .RebootOptions:5 
.[K]ernel: kernel (1 of 2)6 .Configure Boot 
[O]ptions...Autoboot in 9 seconds. [Space] to 
pauseAutoboot in 8 seconds. [Space] to 
pauseAutoboot in 7 seconds. [Space] to 
pauseAutoboot in 6 seconds. [Space] to 
pauseAutoboot in 5 seconds. [Space] to pause[2
 5;0HAutoboot in 4 seconds. [Space] to pauseAutoboot in 3 
seconds. [Space] to pauseAutoboot in 2 seconds. [Space] to 
pauseAutoboot in 1 seconds. [Space] to pause        
\|/-\bhyve -c 2 -m 2G -AI -H -P -g 0 -s 0:0,hostbridge -s 1:0,lpc -s 
2:0,virtio-net,tap10,mac=58:9c:fc:00:00:2e -s 
 -l com1,stdio vm_test
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #4 r285435: Mon Jul 13 05:59:06 UTC 2015
FreeBSD clang version 3.6.1 (tags/RELEASE_361/final 237755) 20150525
WARNING: WITNESS option enabled, expect reduced performance.
VT: running with driver "vga".
CPU: Intel(R) Xeon(R) CPU           E5620  @ 2.40GHz (2399.76-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x206c2  Family=0x6  Model=0x2c  Stepping=2
  AMD Features=0x24100800<SYSCALL,NX,Page1GB,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
Hypervisor: Origin = "bhyve bhyve "
real memory  = 2147483648 (2048 MB)
avail memory = 2039312384 (1944 MB)
Event timer "LAPIC" quality 400
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 2 package(s) x 1 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80e3f650, 0) error 19
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <BHYVE BVXSDT> on motherboard
acpi0: Power Button (fixed)
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 10000000 Hz quality 950
Event timer "HPET" frequency 10000000 Hz quality 550
Event timer "HPET1" frequency 10000000 Hz quality 450
Event timer "HPET2" frequency 10000000 Hz quality 450
Event timer "HPET3" frequency 10000000 Hz quality 450
Event timer "HPET4" frequency 10000000 Hz quality 450
Event timer "HPET5" frequency 10000000 Hz quality 450
Event timer "HPET6" frequency 10000000 Hz quality 450
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
virtio_pci0: <VirtIO PCI Network adapter> port 0x2000-0x201f mem 
0xc0000000-0xc0001fff irq 16 at device 2.0 on pci0
vtnet0: <VirtIO Networking Adapter> on virtio_pci0
vtnet0: Ethernet address: 58:9c:fc:00:00:2e
001.018545 [ 421] vtnet_netmap_attach       max rings 1
vtnet0: netmap queues/slots: TX 1/1024, RX 1/1024
001.018546 [ 426] vtnet_netmap_attach       virtio attached txq=1, txd=1024 
rxq=1, rxd=1024
ahci0: <Intel ICH8 AHCI SATA controller> mem 0xc0002000-0xc00023ff irq 17 at 
device 3.0 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
qpi0: <QPI system bus> on motherboard
vga0: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <BHYVE SATA DISK 001> ATA8-ACS SATA 2.x device
ada0: Serial Number 123456
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 2048MB (4194304 512 byte sectors: 16H 63S/T 4161C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/ufs/TESTROOT [rw]...
/etc/rc: WARNING: hostid: unable to figure out a UUID from DMI data, generating 
a new one
Setting hostuuid: b4cad5d1-292b-11e5-b9fb-589cfc00002e.
Setting hostid: 0x6d8e562e.
No suitable dump device was found.
Starting file system checks:
/dev/ufs/TESTROOT: clean, 234845 free (101 frags, 29343 blocks, 0.0% 
Mounting local file systems:.
/etc/rc: WARNING: $hostname is not set -- see rc.conf(5).
Setting up 
Feeding entropy:random: unblocking device.
vtnet0: link state changed to UP
Starting Network: lo0 vtnet0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        inet6 ::1 prefixlen 128 
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 
        inet netmask 0xff000000 
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        groups: lo 
        ether 58:9c:fc:00:00:2e
        inet netmask 0xffffff00 broadcast 
        media: Ethernet 10Gbase-T <full-duplex>
        status: active
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib
32-bit compatibility ldconfig path: /usr/lib32
Starting devd.
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff: gateway ::1
add net :: gateway ::1
Generating host.conf.
Creating and/or trimming log files.
Starting syslogd.
Starting casperd.
Clearing /tmp (X related).
Updating motd:.
Mounting late file systems:.
Configuring vt: blanktime.
Generating RSA1 host key.
2048 67:34:07:ec:74:51:7c:3d:88:ca:7a:63:49:22:8f:ba  root@ (RSA1)
Generating RSA host key.
2048 60:bd:e3:77:25:08:3f:7b:95:03:35:78:b2:f0:bd:47  root@ (RSA)
Generating DSA host key.
1024 7f:2e:b0:03:00:4d:26:11:9f:75:66:94:15:51:18:50  root@ (DSA)
Generating ECDSA host key.
256 63:76:c1:73:cd:b4:9b:cf:01:ed:8a:f9:d5:ab:0a:f9  root@ (ECDSA)
Generating ED25519 host key.
256 f9:4a:90:51:56:b7:da:bf:1f:75:23:07:41:07:95:c0  root@ (ED25519)
Performing sanity check on sshd configuration.
Starting sshd.
Starting sendmail_submit.
panic: random_fortuna_read(): bytecount (= 124) must be a multiple of 16
cpuid = 1
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe009744f5b0
vpanic() at vpanic+0x189/frame 0xfffffe009744f630
kassert_panic() at kassert_panic+0x132/frame 0xfffffe009744f6a0
random_fortuna_read() at random_fortuna_read+0x1e6/frame 0xfffffe009744f6c0
read_random() at read_random+0x9f/frame 0xfffffe009744f7a0
sysctl_kern_arnd() at sysctl_kern_arnd+0x3e/frame 0xfffffe009744f8d0
sysctl_root_handler_locked() at sysctl_root_handler_locked+0x8a/frame 
sysctl_root() at sysctl_root+0x18e/frame 0xfffffe009744f990
userland_sysctl() at userland_sysctl+0x16e/frame 0xfffffe009744fa30
sys___sysctl() at sys___sysctl+0x74/frame 0xfffffe009744fae0
amd64_syscall() at amd64_syscall+0x282/frame 0xfffffe009744fbf0
Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe009744fbf0
--- syscall (202, FreeBSD ELF64, sys___sysctl), rip = 0x80146f77a, rsp = 
0x7fffffffd898, rbp = 0x7fffffffd8d0 ---
KDB: enter: panic
[ thread pid 569 tid 100068 ]
Stopped at      kdb_enter+0x3e: movq    $0,kdb_why
db> Traceback (most recent call last):
  File "/vm/freebsd-ci/scripts/test/", line 207, in <module>
  File "/vm/freebsd-ci/scripts/test/", line 79, in main
  File "/vm/freebsd-ci/scripts/test/", line 137, in runTest
    child2.expect(['login:'], timeout=1200)
  File "/usr/local/lib/python2.7/site-packages/pexpect/", line 1451, 
in expect
    timeout, searchwindowsize)
  File "/usr/local/lib/python2.7/site-packages/pexpect/", line 1466, 
in expect_list
    timeout, searchwindowsize)
  File "/usr/local/lib/python2.7/site-packages/pexpect/", line 1568, 
in expect_loop
    raise TIMEOUT(str(err) + '\n' + str(self))
pexpect.TIMEOUT: Timeout exceeded.
<pexpect.spawn object at 0x8072f67d0>
version: 3.3
command: /usr/sbin/bhyve
args: [u'/usr/sbin/bhyve', u'-c', u'2', u'-m', u'2G', u'-AI', u'-H', u'-P', 
u'-g', u'0', u'-s', u'0:0,hostbridge', u'-s', u'1:0,lpc', u'-s', 
u'2:0,virtio-net,tap10,mac=58:9c:fc:00:00:2e', u'-s', 
 u'-l', u'com1,stdio', u'vm_test']
searcher: <pexpect.searcher_re object at 0x8072f6850>
buffer (last 100 chars): 'nter: panic\r\n[ thread pid 569 tid 100068 
]\r\nStopped at      kdb_enter+0x3e: movq    $0,kdb_why\r\ndb> '
before (last 100 chars): 'nter: panic\r\n[ thread pid 569 tid 100068 
]\r\nStopped at      kdb_enter+0x3e: movq    $0,kdb_why\r\ndb> '
after: <class 'pexpect.TIMEOUT'>
match: None
match_index: None
exitstatus: None
flag_eof: False
pid: 30557
child_fd: 4
closed: False
timeout: 30
delimiter: <class 'pexpect.EOF'>
logfile: <open file '<stdout>', mode 'w' at 0x800670150>
logfile_read: None
logfile_send: None
maxread: 2000
ignorecase: False
searchwindowsize: None
delaybeforesend: 0.05
delayafterclose: 0.1
delayafterterminate: 0.1
Build step 'Execute shell' marked build as failure
Recording test results
ERROR: Publisher 'Publish JUnit test result report' failed: Test reports were 
found but none of them are new. Did tests run? 
For example, /builds/FreeBSD_HEAD-tests/test-report.xml is 14 hr old

Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
_______________________________________________ mailing list
To unsubscribe, send any mail to ""

Reply via email to