Hi to all again! [Solved] After #dd if=freebsd11.0-current.img of=/dev/da1 bs=8M I am print man fdisk and run #fdisk -a /dev/da1 and set Active partition for FreeBSD-11.0-CURRENT installer, after that NUC Bios successfully run usb-stick.img. Thank to All and man pages!
05.09.2015, 05:06, "Dmitry Postolov" <dip-free...@yandex.ru>: > Hi to all! Sorry for my bad English... > > FreeBSD-10.2-RELEASE-amd64.img successfully starts from USB-stick and from > drive afrer installation with workaround "GPT + Active" in installer menu. > > FreeBSD-11.0-CURRENT-amd64.img doesn't start from USB-stick. Intel NUC > DN2820(2830)FYKH0 Bios 0051 print about error: "Reboot snd Select proper Boot > device or insert Boot Media in selected Boot device and press a key". > > Maybe problem consists in, that to set a flag "GPT + Active" for > CURRENT-amd64.img? How I can make it? > > 10.05.2015, 16:33, "Dmitry Postolov" <dip-free...@yandex.ru>: >> Hi to all! >> >> Sorry for my bad English... This message is translated with help of the >> translator's online. >> >> You could comment on a situation with my nettop Intel NUC DN2820FYKH (CPU >> Celeron N2830)? >> >> This NUC was delivered with pre-installed BIOS 0032. With this version BIOS >> I am could install FreeBSD 10 and 11-CURRENT. In next version of BIOS 0034 >> and later installing was a problems. Message of other user, NUC DN2820 can't >> recognize FreeBSD bootsect. >> >> https://communities.intel.com/message/245413 >> >> My situation: --- >> >> FreeBSD-10.1-STABLE-usb-stick.img (May 5 2015) after #dd: ls /dev/da* >> >> /dev/da0 /dev/da0a # Probable this is MBR structure? >> >> FreeBSD-11-CURRENT-usb-stick.img (May 5 2015) after #dd: ls /dev/da* >> >> /dev/da0 /dev/da0p1 /dev/da0p2 /dev/da0p3 /dev/da0p4 # Probable this is GPT >> structure? >> >> --- >> >> And probable the Bug of Intel BIOS for NUC 2820 (N2830): >> >> 0032 BIOS can start MBR FreeBSD-10.1-usb-stick installer, bsdinstall by >> default offers GPT structure for HDD. 0032 successfully run FreeBSD from GPT >> HDD. Also 0032 can start GPT FreeBSD-11-CURRENT-usb-stick installer, >> bsdinstall by default offers MBR structure for HDD? (or use last MBR-HDD >> setting). After install 0032 successfully start FreeBSD-11-CURRENT from HDD. >> >> But with modern BIOS (for example 0050 - latest at this time): 0050 BIOS >> can start MBR FreeBSD-10.1-usb-stick installer, bsdinstaller by default >> offers GPT HDD structure. If install 10.1 with default settings and start >> 10.1 from HDD -> Error. If GPT HDD manually changed to MBR HDD, then 10.1 >> successfully starts from HDD. >> >> But 11-CURRENT-usb-stick has GPT structure and BIOS 0050 can't run it from >> USB. :-(( >> >> Workaround: Reflash 0032 -> Install FreeBSD-11-CURRENT -> OK -> Reflash >> 0050 -> 11-CURRENT starts OK from MBR HDD. >> >> Question: if this situation doesn't be fixed by Intel, how NUC 2820(2830) >> new versions of BIOS users can start FreeBSD-11 without BIOS reflashing, if >> FreeBSD-11-stick.img will be only at GPT structure? >> >> --- >> >> best regards, >> Dmitry Postolov >> dip-free...@yandex.ru >> >> _______________________________________________ >> email@example.com mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-current >> To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org" > > _______________________________________________ > firstname.lastname@example.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org" _______________________________________________ email@example.com mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"