> On 29 Dec 2015, at 14:31, Hans Petter Selasky <h...@selasky.org> wrote: > > On 12/29/15 13:26, Daniel Braniss wrote: >> >>> On 29 Dec 2015, at 12:20, Hans Petter Selasky <h...@selasky.org> wrote: >>> >>> On 12/29/15 11:12, Daniel Braniss wrote: >>>> >>>> https://github.com/Mange/rtl8192eu-linux-driver/blob/master/os_dep/linux/usb_intf.c >>>> >>>> <https://github.com/Mange/rtl8192eu-linux-driver/blob/master/os_dep/linux/usb_intf.c> >>>> and look at line 216 >>>> >>>> danny >>> >>> Hi, >>> >>> You should be able to get this device working by adding a device entry to: >>> >>> src/sys/dev/usb/wlan/if_urtwn.c >>> >>> Can you make a patch and PR for this, and I'll submit upstream. I recommend >>> you test using an 11-current kernel. >>> >>> --HPS >> >> clearly, I’m missing something, because it’s not working :-( >> the only visible change is now >> ugen0.4: <802.11n WLAN Adapter RealtekWireless N Nano USB A> at usbus0, >> cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA) >> before it was >> ugen0.4: <Wireless N Nano USB Adapter Realtek> at usbus0, cfg=0 md=HOST >> spd=HIGH (480Mbps) pwr=ON (500mA) >> >> rnd> svn diff >> Index: usbdevs >> =================================================================== >> --- usbdevs (revision 291745) >> +++ usbdevs (working copy) >> @@ -1657,6 +1657,7 @@ >> product DLINK2 RTL8192SU_1 0x3300 RTL8192SU >> product DLINK2 RTL8192SU_2 0x3302 RTL8192SU >> product DLINK2 DWA131A1 0x3303 DWA-131 A1 >> +product DLINK DWA131 0x3319 DWA-131 >> product DLINK2 DWA160A2 0x3a09 DWA-160 A2 >> product DLINK2 DWA120 0x3a0c DWA-120 >> product DLINK2 DWA120_NF 0x3a0d DWA-120 (no firmware) >> Index: wlan/if_urtwn.c >> =================================================================== >> --- wlan/if_urtwn.c (revision 291745) >> +++ wlan/if_urtwn.c (working copy) >> @@ -116,6 +116,7 @@ >> URTWN_DEV(DLINK, RTL8192CU_2), >> URTWN_DEV(DLINK, RTL8192CU_3), >> URTWN_DEV(DLINK, DWA131B), >> + URTWN_DEV(DLINK, DWA131), // danny >> URTWN_DEV(EDIMAX, EW7811UN), >> URTWN_DEV(EDIMAX, RTL8192CU), >> URTWN_DEV(FEIXUN, RTL8188CU), >> > > Hi, > > You should use vendor RALINK (according to your usbconfig dump) > > vendor RALINK 0x148f Ralink Technology
you are confusing Vladimir’s with mine. here is mine again: ugen0.4: <Wireless N Nano USB Adapter Realtek> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0210 bDeviceClass = 0x0000 <Probed by interface class> bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0040 idVendor = 0x2001 <================== D-LINK idProduct = 0x3319 bcdDevice = 0x0200 iManufacturer = 0x0001 <Realtek> iProduct = 0x0002 <Wireless N Nano USB Adapter> iSerialNumber = 0x0003 <00e04c000001> bNumConfigurations = 0x0001 danny _______________________________________________ freebsd-current@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"