I cvsup'ed, make world, rebuild+install kernel, reboot, without
problem.  Good work.

I upgraded from Apr 4 -current to May 28 -current

and have devices listed as 'unknown' in dmesg.  Everything appears to
function OK.

The serial ports, sio0 and sio1 appear both as sio and unknown.


=== dmesg ====
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #1: Sun May 28 11:07:09 PDT 2000
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium/P54C (109.34-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x525  Stepping = 5
real memory  = 100663296 (98304K bytes)
avail memory = 94887936 (92664K bytes)
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  0, version: 0x00030010, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00030010, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x000f0011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc02f2000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc02f209c.
Intel Pentium detected, installing workaround for F00F bug
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
ncr0: <ncr 53c810 fast10 scsi> port 0xec00-0xecff mem 0xfedfbf00-0xfedfbfff irq 11 at 
device 1.0 on pci0
isab0: <Intel 82378IB PCI to ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
pci0: <Matrox MGA Millennium 2064W graphics accelerator> at 6.0 irq 9
de0: <Digital 21041 Ethernet> port 0xe880-0xe8ff mem 0xfedfbe80-0xfedfbeff irq 10 at 
device 8.0 on pci0
de0: DEC DE450-CA 21041 [10Mb/s] pass 1.1
de0: address 00:00:f8:02:76:db
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: This ppc chipset does not support the extended I/O port range...no problem
ppc0: <Parallel port> at port 0x378-0x37b irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
unknown0: <PCI Bus> at port 0x4d0-0x4d1,0xcf8,0xcfa on isa0
unknown1: <System control port> at port 0x26,0x26e-0x26f on isa0
unknown2: <AT Speaker> at port 0x61 on isa0
unknown3: <System Memory> at iomem 
0-0x9ffff,0xe0000-0xfffff,0xfec00000-0xfec3ffff,0xfee00000-0xfee3ffff on isa0
unknown: <IBM Enhanced (101/102-key) KC> can't assign resources
npxisa0: <Legacy ISA coprocessor support> at port 0xf0-0xff irq 13 on isa0
unknown: <Microsoft PS/2 Mouse> can't assign resources
unknown: <16550 compatible COM device> can't assign resources
unknown: <16550 compatible COM device> can't assign resources
unknown: <LPT printer port> can't assign resources
unknown4: <IDE Fixed Disk Controller> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
unknown: <Floppy Controller> can't assign resources
unknown5: <ISA DMA Controller> at port 0-0xf,0x81-0x8f,0xc0-0xdf drq 4 on isa0
unknown6: <ISA PIC> at port 0x20-0x21,0xa0-0xa1 irq 2 on isa0
unknown7: <ISA Timer> at port 0x40-0x43 irq 0 on isa0
unknown8: <ISA RTC Controller> at port 0x70-0x71 irq 8 on isa0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Waiting 10 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
cd0 at ncr0 bus 0 target 5 lun 0
cd0: <TOSHIBA CD-ROM XM-5401TA 3605> Removable CD-ROM SCSI-2 device 
cd0: 4.237MB/s transfers (4.237MHz, offset 8)
cd0: cd present [295811 x 2048 byte records]
da0 at ncr0 bus 0 target 0 lun 0
da0: <QUANTUM FIREBALL1080S 1Q09> Fixed Direct Access SCSI-2 device 
da0: 10.000MB/s transfers (10.000MHz, offset 8)
da0: 1042MB (2134305 512 byte sectors: 255H 63S/T 132C)
da2 at ncr0 bus 0 target 2 lun 0
da2: <QUANTUM EMPIRE_1080S 1240> Fixed Direct Access SCSI-2 device 
da2: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
da2: 1029MB (2109376 512 byte sectors: 255H 63S/T 131C)
Mounting root from ufs:/dev/da1s1a
da1 at ncr0 bus 0 target 1 lun 0
da1: <IBM DNES-309170 SAH0> Fixed Direct Access SCSI-3 device 
da1: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
da1: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)
de0: enabling BNC port

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message

Reply via email to