On 26/05/2016 7:24 AM, Maksim Yevmenkin wrote:

can you also please try to start it manually and see where it stops?
i.e. something like

# sh -x /etc/rc.d/bluetooth start ubt0
Thanks for responding. The output of that command is below. I'll do some
more diagnosis when I get home tonight.
+ /usr/sbin/hccontrol -n ubt0hci reset
+ return 1
so, "reset" command failed :( can you please tell me which exact
broadcom device you have, i.e. vendor id and product id? some broadcom
devices may require firmware download. you said it was working before,
can you please tell if you had to download firmware before? i.e. use
ubtbcmfw ? are you dual booting between freebsd and windows (or

dmesg shows:

 ubt0: <Broadcom USB Bluetooth Dongle, class 224/1, rev 1.10/0.01, addr 2> on 

usbconfig dump_device_desc shows:
 ugen6.2: <USB Bluetooth Dongle Broadcom> at usbus6, cfg=0 md=HOST spd=FULL 
(12Mbps) pwr=ON (100mA)

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0110
  bDeviceClass = 0x00e0  <Wireless controller>
  bDeviceSubClass = 0x0001
  bDeviceProtocol = 0x0001
  bMaxPacketSize0 = 0x0040
  idVendor = 0x0a5c
  idProduct = 0x200a
  bcdDevice = 0x0001
  iManufacturer = 0x0001  <Broadcom>
  iProduct = 0x0002  <USB Bluetooth Dongle>
  iSerialNumber = 0x0003  <2035B0000001>
  bNumConfigurations = 0x0001

No, I don't dual boot anything. I have never loaded firmware - maybe it 
happened automatically in the past, but I've never used ubtbcmfw explicitly.

Thanks for your help,

freebsd-current@freebsd.org mailing list
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

Reply via email to