Am Sat, 23 Jul 2016 14:49:11 -0600 Ian Lepore <i...@freebsd.org> schrieb:
> On Sat, 2016-07-23 at 22:04 +0200, O. Hartmann wrote: > > Am Fri, 22 Jul 2016 10:52:54 -0600 > > Ian Lepore <i...@freebsd.org> schrieb: > > > > > On Fri, 2016-07-22 at 18:35 +0200, O. Hartmann wrote: > > > > For temperature monitoring, we have a bunch of Digi Watchport/T > > > > sensors: > > > > > > > > http://ftp1.digi.com/support/documentation/90000406_H.pdf > > > > > > > > > > > [...] > > > > > > I think the attached patch will make it show up as a ttyU*/cuaU* > > > device > > > for you. (You should probably use the /dev/cuaU* flavor, to avoid > > > problems with tty layer and modem control signals). > > > > > > I keep wishing we had a mechanism, like a sysctl that could be set > > > or > > > something, that would let you supply a vendor/product pair and have > > > the > > > ugensa driver attach to that device, for quick testing of this sort > > > of > > > thing. > > > > > > -- Ian > > > > No, it doesn't change anything. I applied the patch to most recent > > CURRENT and it is > > still the same. But thanks anyway. > > > > Kind regards, > > > > oh > > Oh, my bad, I forgot to mention: You'll have to manually "kldload > ugensa" before plugging in the device (or load it from your > loader.conf). > > When the change gets committed (assuming it works), the devd usb > scripts will get regenerated, and that's what handles the auto-load of > the driver. > > -- Ian man ugensa doesn't exist! As I wrote earlier, I tried everything to load what I could find. It seems, the patch and the hint about ugensa.ko did the magic ;-) Thank you very much! Could the patch be made permanent to FreeBSD CURRENT? And also important: where is the man page for ugensa? Can the the module be compiled staitcally into the kernel or are there pitfalls? root@localhost: [src] kldload ugensa ugen2.7: <Digi International> at usbus2 ugensa0: <Digi International WatchportT, rev 1.10/1.00, addr 7> on usbus2 ugensa0: Found 1 interfaces. root@thor: [src] man ugensa No manual entry for ugensa root@localhost: [src] ll /dev/cuaU0* 203 crw-rw---- 1 uucp dialer - 0xcb Jul 24 07:51 /dev/cuaU0 204 crw-rw---- 1 uucp dialer - 0xcc Jul 24 07:51 /dev/cuaU0.init 205 crw-rw---- 1 uucp dialer - 0xcd Jul 24 07:51 /dev/cuaU0.lock I'll try now to get informations out of the device, I let you know whether that is a success. But anyway, again, thank you for helping making the device visible and available. Kind regards, Oliver Hartmann
pgpHw4rHeTvK9.pgp
Description: OpenPGP digital signature
