> On 1 Sep 2016, at 13:29, Andriy Voskoboinyk <a...@freebsd.org> wrote: > > Hi everyone, > > rtwn(4), urtwn(4) and urtwm (from previous emails) drivers were merged into a > single rtwn driver (plus rtwn_usb / rtwn_pci device glue); the code is > available on https://github.com/s3erios/rtwn repository. Among bugfixes / > code deduplication, there some new features too: > > 1) multi-vap support (one any wireless interface + one STA interface + > any number of monitor mode interfaces). > 2) few new sysctls: > * dev.rtwn.#.crypto - controls how to use hardware crypto acceleration > * dev.rtwn.#.ratectl_selected > * dev.rtwn.#.ratectl - selects current 'rate control' algorithm > (currently only 'none' and 'net80211' are supported; RTL8192CE needs testing > with the last). > 3) (incomplete) power management support for RTL8188EU (requires firmware). > 4) Short Guard Interval support. > > It's known to work with RTL8188CUS, RTL8188EU and RTL8821AU; however, > it was never tested with RTL8192CE or RTL8812AU. > > How-to-build: > 1) download / checkout the repository. > 2) apply 'patch-usbdevs.diff' against '/usr/src' > 3) build and install rtwn module: > cd $repository/sys/modules/rtwn && make && make install > 4) build and install rtwn_usb/rtwn_pci: > cd ../rtwn_usb && make && make install > cd ../rtwn_pci && make && make install > 5) unload previous && load current drivers: > kldunload if_urtwn if_rtwn > kldload /boot/modules/if_rtwn.ko /boot/modules/if_rtwn_usb.ko > /boot/modules/if_rtwn_pci.ko > 6) Use.
I have a Thinkpad T430 with a PCIe RTL8188CE. It fails waying I didn’ t load a firmware that doesn’ t exist: rtwn0: <Realtek RTL8188CE> port 0x4000-0x40ff mem 0xf1c00000-0xf1c03fff at device 0.0 on pci2 rtwn0: r92ce_attach: warning: hardware crypto enabled rtwn0: MAC/BB RTL8188CE, RF 6052 1T1R wlan0: Ethernet address: e0:06:e6:c7:54:73 rtwn-rtl8192cfwE_B: could not load firmware image, error 2 rtwn0: failed loadfirmware of file rtwn-rtl8192cfwE_B I’ve loaded rtwn-rtl8192cfwU_B.ko, never heard of rtwn-rtl8192cfwE_B.ko -- Renato Botelho _______________________________________________ email@example.com mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"