Am Thu, 17 Nov 2016 20:47:22 +0100
Stefan Ehmann <shoes...@gmx.net> schrieb:
> On 17.11.2016 10:44, O. Hartmann wrote:
> > Hello,
> > I'm looking for a suitable SmartCard read with USB connection for
> > 12-CURRENT (and
> > probably 11-STABLE). We have lots of Omnikey 3121 devices at hand, but I
> > wasn't able
> > to make this type of SC reader working. it is recognised by the kernel as
> > UGEN device
> > on the USB bus.
> > I tried to investigate what driver I need to use, but failed. The
> > references I found
> > referring to SC card daemones all point to a serial device like /dev/cuaUXX
> > - but as
> > far as I know, such a device is present if the UART<->USB has been
> > recognised by the
> > appropriate driver.
> > So, the question is: do I miss something here (I'm not quite familiar with
> > USB/serial
> > devices)?
> > If the device Omnikey HID 3121 is properly supported and I'm to dull to
> > figure this
> > out - please enlighten me! If there are aafordable alternatives (external
> > or internal
> > for add-on in a workstation) I would be glad to get your hint.
> On 11.0 the OMNIKEY 3121 works fine:
> # pkg install pcsc-lite ccid
> # echo 'pcscd_enable="YES"' >> /etc/rc.conf
> # service pcscd start
> For a simple test you can install security/pcsc-tools and run pcsc_scan
> or (g)scriptor.
> If you have problems, I suggest starting pcscd manually with
> # pcscd -f -d
Nice to read!
Thank you very much.
Ich widerspreche der Nutzung oder Übermittlung meiner Daten für
Werbezwecke oder für die Markt- oder Meinungsforschung (§ 28 Abs. 4 BDSG).
email@example.com mailing list
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"