Hiya, Recently, I've installed FreeBSD 11.1 almost everything works fine. :D But when I'm bringing my Notebook Lenovo 3000 G530 4151 into S3 Suspend I can't wake it up anymore. I also can't connect per ssh to the machine. I would like to know, how I can debug the machine in suspend/resume modus?
Frank P.S: By the way, I have the same issues with FreeBSD current.
Copyright (c) 1992-2016 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.0-RELEASE-p1 #3: Thu Jul 20 08:26:18 BST 2017 gandalf@lappi:/usr/obj/usr/src/sys/GENERIC amd64 FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0) VT(vga): resolution 640x480 info: [drm] Initialized drm 1.1.0 20060810 module_register: cannot register pci/ehci from kernel; already loaded from ehci.ko Module pci/ehci failed to register: 17 module_register: cannot register pci/uhci from kernel; already loaded from uhci.ko Module pci/uhci failed to register: 17 CPU: Intel(R) Celeron(R) CPU 900 @ 2.20GHz (2194.55-MHz K8-class CPU) Origin="GenuineIntel" Id=0x1067a Family=0x6 Model=0x17 Stepping=10 Features=0xafebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> Features2=0xc00e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE,OSXSAVE> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant, performance statistics real memory = 1073741824 (1024 MB) avail memory = 953561088 (909 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <PTLTD APIC > random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 on motherboard random: entropy device external interface kbd1 at kbdmux0 netmap: loaded module module_register_init: MOD_LOAD (vesa, 0xffffffff81035950, 0) error 19 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <LENOVO CB-01> on motherboard acpi0: Power Button (fixed) hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 cpu0: <ACPI CPU> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf4000000-0xf43fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 agp0: <Intel GM45 SVGA controller> on vgapci0 agp0: aperture size is 256M, detected 32764k stolen memory acpi_video0: <ACPI video extension> on vgapci0 drmn0: <Mobile Intel\M-B\M-. GM45 Express Chipset> on vgapci0 iicbus0: <Philips I2C bus> on iicbb0 addr 0xff iic0: <I2C generic I/O> on iicbus0 iic1: <I2C generic I/O> on iicbus1 iicbus2: <Philips I2C bus> on iicbb1 addr 0x0 iic2: <I2C generic I/O> on iicbus2 iic3: <I2C generic I/O> on iicbus3 iicbus4: <Philips I2C bus> on iicbb2 addr 0x0 iic4: <I2C generic I/O> on iicbus4 iic5: <I2C generic I/O> on iicbus5 iicbus6: <Philips I2C bus> on iicbb3 addr 0x0 iic6: <I2C generic I/O> on iicbus6 iic7: <I2C generic I/O> on iicbus7 iicbus8: <Philips I2C bus> on iicbb4 addr 0x0 iic8: <I2C generic I/O> on iicbus8 iic9: <I2C generic I/O> on iicbus9 iicbus10: <Philips I2C bus> on iicbb5 addr 0x0 iic10: <I2C generic I/O> on iicbus10 iic11: <I2C generic I/O> on iicbus11 info: [drm] MSI enabled 1 message(s) info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). info: [drm] Driver supports precise vblank timestamp query. drmn0: taking over the fictitious range 0xd0000000-0xe0000000 info: [drm] Connector LVDS-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.LVDS-1 info: [drm] - kern.vt.fb.default_mode info: [drm] Connector VGA-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.VGA-1 info: [drm] - kern.vt.fb.default_mode info: [drm] Connector DP-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.DP-1 info: [drm] - kern.vt.fb.default_mode fbd0 on drmn0 VT: Replacing driver "vga" with new "fb". info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0 vgapci0: Boot video device vgapci1: <VGA-compatible display> mem 0xf4400000-0xf44fffff at device 2.1 on pci0 uhci0: <Intel 82801I (ICH9) USB controller> port 0x1820-0x183f irq 16 at device 26.0 on pci0 uhci0: LegSup = 0x3700 usbus0 on uhci0 uhci1: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 21 at device 26.1 on pci0 uhci1: LegSup = 0x2700 usbus1 on uhci1 uhci2: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 20 at device 26.2 on pci0 uhci2: LegSup = 0x2700 usbus2 on uhci2 ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf4904800-0xf4904bff irq 20 at device 26.7 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 hdac0: <Intel 82801I HDA Controller> mem 0xf4700000-0xf4703fff irq 22 at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pcib1: [GIANT-LOCKED] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 pcib2: [GIANT-LOCKED] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pcib3: [GIANT-LOCKED] pci1: <ACPI PCI bus> on pcib3 siba_bwn0: <Broadcom BCM4312 802.11b/g Wireless> mem 0xf4500000-0xf4503fff irq 18 at device 0.0 on pci1 bwn0 on siba_bwn0 bwn0: WLAN (chipid 0x4312 rev 15) PHY (analog 6 type 5 rev 1) RADIO (manuf 0x17f ver 0x2062 rev 2) bwn0: DMA (64 bits) bwn0: Using 1 MSI messages pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pcib4: [GIANT-LOCKED] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 pcib5: [GIANT-LOCKED] pci2: <ACPI PCI bus> on pcib5 bge0: <Broadcom BCM5906 A2, ASIC rev. 0x00c002> mem 0xf4600000-0xf460ffff irq 17 at device 0.0 on pci2 bge0: CHIP ID 0x0000c002; ASIC REV 0x0c; CHIP REV 0xc0; PCI-E miibus0: <MII bus> on bge0 brgphy0: <BCM5906 10/100baseTX media interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow bge0: Ethernet address: 00:26:22:de:d9:82 uhci3: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 23 at device 29.0 on pci0 uhci3: LegSup = 0x2700 usbus4 on uhci3 uhci4: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 19 at device 29.1 on pci0 uhci4: LegSup = 0x2700 usbus5 on uhci4 uhci5: <Intel 82801I (ICH9) USB controller> port 0x18c0-0x18df irq 18 at device 29.2 on pci0 uhci5: LegSup = 0x2700 usbus6 on uhci5 ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf4904c00-0xf4904fff irq 23 at device 29.7 on pci0 usbus7: EHCI version 1.0 usbus7 on ehci1 pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci3: <ACPI PCI bus> on pcib6 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel ICH9M AHCI SATA controller> port 0x1818-0x181f,0x180c-0x180f,0x1810-0x1817,0x1808-0x180b,0x18e0-0x18ff mem 0xf4904000-0xf49047ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_tz0: <Thermal Zone> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xdc000-0xdffff,0xe0000-0xe17ff on isa0 ppc0: cannot reserve I/O port range Timecounters tick every 1.000 msec nvme cam probe device init hdacc0: <Conexant CX20561 (Hermosa) HDA CODEC> at cad 2 on hdac0 hdaa0: <Conexant CX20561 (Hermosa) Audio Function Group> at nid 1 on hdacc0 pcm0: <Conexant CX20561 (Hermosa) (Analog 2.0+HP/2.0)> at nid 26,22 and 29 on hdaa0 pcm1: <Conexant CX20561 (Hermosa) (Rear Analog Mic)> at nid 24 on hdaa0 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 12Mbps Full Speed USB v1.0 usbus7: 480Mbps High Speed USB v2.0 warning: [drm] fixme: max PWM is zero ugen7.1: <Intel> at usbus7 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 ugen6.1: <Intel> at usbus6 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 ugen5.1: <Intel> at usbus5 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen4.1: <Intel> at usbus4 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen3.1: <Intel> at usbus3 uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ugen2.1: <Intel> at usbus2 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen1.1: <Intel> at usbus1 uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen0.1: <Intel> at usbus0 uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub6: 2 ports with 2 removable, self powered uhub7: 2 ports with 2 removable, self powered warning: [drm] fixme: max PWM is zero warning: [drm] fixme: max PWM is zero ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <TOSHIBA MQ01ABF050 AM0P2C> ATA8-ACS SATA 3.x device ada0: Serial Number Y4ACS64US ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada0: Command Queueing enabled ada0: 476940MB (976773168 512 byte sectors) cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 cd0: <Optiarc DVD RW AD-7580S F820> Removable CD-ROM SCSI device cd0: Serial Number SL95022018 cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed taskqgroup_adjust failed cnt: 1 stride: 1 mp_ncpus: 1 smp_started: 0 taskqgroup_adjust failed cnt: 1 stride: 1 mp_ncpus: 1 smp_started: 0 Timecounter "TSC-low" frequency 1097273270 Hz quality 1000 Trying to mount root from ufs:/dev/ada0s1a [rw]... WARNING: / was not properly dismounted WARNING: /: mount pending error: blocks 32 files 17 uhub0: 6 ports with 6 removable, self powered uhub4: 6 ports with 6 removable, self powered ugen7.2: <vendor 0x090c> at usbus7 wlan0: Ethernet address: 00:26:82:48:12:20 bwn0: ucode fw: ucode15 bwn0: firmware version (rev 478 patch 104 date 0x8701 time 0x657) bwn0: ucode fw: ucode15 bwn0: firmware version (rev 478 patch 104 date 0x8701 time 0x657) bwn0: ucode fw: ucode15 bwn0: firmware version (rev 478 patch 104 date 0x8701 time 0x657) bwn0: ucode fw: ucode15 bwn0: firmware version (rev 478 patch 104 date 0x8701 time 0x657) bwn0: ucode fw: ucode15 bwn0: firmware version (rev 478 patch 104 date 0x8701 time 0x657) wlan0: link state changed to UP bwn0: need multicast update callback bwn0: need multicast update callback bwn0: need multicast update callback
i915kms_load="YES" kern.vty=vt if_bwn_load="YES" bwn_v4_lp_ucode_load="YES" acpi_video_load="YES" acpi_wmi_load="YES" usb_load="YES" ehci_load="YES" uhci_load="YES" kern.ipc.shm_allow_removed=1
kern.ipc.shm_allow_removed=1 hw.acpi.reset_video=0 hw.acpi.lid_switch_state=S3 hw.acpi.sleep_button_state=S3 hw.acpi.power_button_state=S5 hw.acpi.sleep_delay=3 hw.acpi.verbose=1 hw.syscons.sc_no_suspend_vtswitch=0
pgpCs1iYqsqAf.pgp
Description: OpenPGP digital signature