On Wed, Sep 13, 2017 at 09:21:57AM -0600, Sean Bruno wrote:
> ...
> When you get a chance, let me know what em(4) device is in your machine
> (pciconf -lvbc).  I'll see if I have one around here to test.

stable/11 says:

em0@pci0:0:25:0:        class=0x020000 card=0x05cc1028 chip=0x153a8086 rev=0x04 
    vendor     = 'Intel Corporation'
    device     = 'Ethernet Connection I217-LM'
    class      = network
    subclass   = ethernet
    bar   [10] = type Memory, range 32, base 0xf7100000, size 131072, enabled
    bar   [14] = type Memory, range 32, base 0xf7139000, size 4096, enabled
    bar   [18] = type I/O Port, range 32, base 0xf040, size 32, enabled
    cap 01[c8] = powerspec 2  supports D0 D3  current D0
    cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
    cap 13[e0] = PCI Advanced Features: FLR TP

dmesg from verbose boot from yesterday's head says:
em0: <Intel(R) PRO/1000 Network Connection> port 0xf040-0xf05f mem 
0xf7100000-0xf711ffff,0xf7139000-0xf7139fff irq 20 at device 25.0 on pci0
em0: attach_pre capping queues at 1
em0: using 1024 tx descriptors and 1024 rx descriptors
em0: msix_init qsets capped at 1
em0: PCIY_MSIX capability not found; or rid 0 == 0.
em0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 267 to local APIC 4 vector 50
em0: using IRQ 267 for MSI
em0: Using an MSI interrupt
em0: allocated for 1 tx_queues
em0: allocated for 1 rx_queues
em0: bpf attached
em0: Ethernet address: 34:e6:d7:3c:4a:93
em0: netmap queues/slots: TX 1/1024, RX 1/1024

> I'm assuming you do *not* have any iflib or em(4) tuning options set either.

Correct! :-)

> sean

Thanks, Sean! :-)

David H. Wolfskill                              da...@catwhisker.org

See http://www.catwhisker.org/~david/publickey.gpg for my public key.

Attachment: signature.asc
Description: PGP signature

Reply via email to