On Thu, Dec 14, 2017 at 8:52 AM, O. Hartmann <ohartm...@walstatt.org> wrote:
> Am Thu, 14 Dec 2017 15:46:17 +0100
> Dimitry Andric <d...@freebsd.org> schrieb:
> > On 14 Dec 2017, at 14:43, O. Hartmann <ohartm...@walstatt.org> wrote:
> > >
> > > Am Thu, 14 Dec 2017 14:09:39 +0100
> > > Daniel Nebdal <dneb...@gmail.com> schrieb:
> > >> On Thu, Dec 14, 2017 at 12:48 PM, O. Hartmann <ohartm...@walstatt.org>
> > >>> I just started the rebuild/resilvering process and watch the pool
> crwaling at ~ 18
> > >>> MB/s. At the moment, there is no load on the array, the host is a
> IvyBridge XEON
> > >>> with 4 core/8 threads and 3,4 GHz and 16 GB of RAM. The HDDs are
> attached to a
> > >>> on-board SATA II (300 MB/s max) Intel chip - this just for the
> > >>>
> > >>> Recently, I switch on the "sync" attribute on most of the defined
> pools's zfs
> > >>> filesystems
> > >>> - I also use a SSD for ZIL/L2ARC caching, but it seems to be unused
> recently in
> > >>> FreeBSD CURRENT's ZFS - this from a observers perspective only.
> > >>>
> > >>> When scrubbing, I see recently also reduced performance on the pool,
> so I'm
> > >>> wondering about the low throughput at the very moment when
> resilvering is in
> > >>> progress.
> > >>>
> > >>> If the "perspective" of "zpool status" is correct, then I have to
> wait after two
> > >>> hours for another 100 hours - ~ 4 days? Ups ... I think there is
> something badly
> > >>> misconfigured or missing.
> > ...
> > >> This is kind of to be expected - for whatever reason, resilvers seem
> > >> to go super slow at first and then speed up significantly. Just don't
> > >> ask me how long "at first" is - I'd give it several (more) hours.
> > Hopefully this will get better in the future, please read:
> > http://open-zfs.org/wiki/Scrub/Resilver_Performance
> > -Dimitry
> It has already been started to become better ;-)
> After a while now, the throughput is at 128 MBytes/s and the estimated
> time decreased to
> ~ 8 h now - that is much more appreciable than 4 days ;-)
If you are viewing the rate with zpool status, I don't think that is a
close to realtime rate. I don't know of a way to check that either.
email@example.com mailing list
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"