On 2020-07-12 00:44, John-Mark Gurney wrote:
Hello,
I'm having issues getting good ethernet performance from a USB ethernet
adapter (ure) under FreeBSD on an HP EliteDesk 705 G2 Mini[1]. It's an
AMD PRO A10-8700B based system using the AMD A78 FCH chipset.
Under FreeBSD -current (r362596), 12.1-R and 11.4-R, the RealTek USB
adapter only gets around 10MB/sec performance. During the transfer,
the CPU usage is only around 3-5%, so it's definitely not CPU bound.
I have tested Windows 10 and NetBSD 9.0 performance, and both provide
100MB/sec+ w/o troubles.
I have attached dmesg from both FreeBSD -current and NetBSD 9.0.
Any hints on how to fix this?
This may be related, but I'm also having issues w/ booting when I have
both a SD USB 2.0 card reader AND the ure plugged into USB 3.0 ports.
If I move the SD card reader to USB 2.0, the umass device will attach
and work. I have also attached a clip of the dmesg from that
happening.
Has anyone else seen this issue? Ideas or thoughts on how to resolve
the performance issues?
Hi,
Can you check the output from ifconfig. What is the actual link speed. I
suspect it has something to do with the MII bus code/implementation.
Also check output from "vmstat -i" during usage to see if the number of
IRQ/s is low.
--HPS
_______________________________________________
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
