On 14.07.2020 1:47, Yuri Pankov wrote: >> AVAGO MegaRAID SAS FreeBSD mrsas driver version: 07.709.04.00-fbsd >> mfi0: <Invader> port 0x6000-0x60ff mem >> 0xc7300000-0xc730ffff,0xc7200000-0xc72fffff irq 26 at device >> 0.0 numa-domain 0 on pci3 >> mfi0: Using MSI >> mfi0: Megaraid SAS driver Ver 4.23 >> mfi0: FW MaxCmds = 928, limiting to 128 >> mfi0: MaxCmd = 928, Drv MaxCmd = 128, MaxSgl = 70, state = 0xb73c03a0 >> ..... >> mfi0: 54944 (boot + 6s/0x0020/info) - Firmware initialization started (PCI >> ID 005d/1000/0809/15d9) >> pcib4: <ACPI PCI-PCI bridge>mfi0: 54945 (boot + 6s/0x0020/info) - Firmware >> version 4.290.00-4536 >> >> >> I have posted screenshots of the panic at: >> www.tegenbosch28.nl/FreeBSD/Crash-LSI3108 >> >> But basically it crashes in >> mfi_tbolt_send_frame() +0x132 >> >> So is there anybody out there that can help me with analyzing and fixing >> this panic? > > I guess it's not the answer you are looking for, but you could try the mrsas > driver and check if it's behaves better for you, by setting 'set > hw.mfi.mrsas_enable=1' from loader prompt.
I'm puzzled. I'm have SuperMicro add-on card based on LSI/Avago/Broadcom 3008. An I'm using "mpr" driver: mpr0: <Avago Technologies (LSI) SAS3008> port 0xe000-0xe0ff mem 0xf7240000-0xf724ffff,0xf7200000-0xf723ffff irq 16 at device 0.0 on pci1 mpr0: Firmware: 14.00.00.00, Driver: 23.00.00.00-fbsd mpr0: IOCCapabilities: 7a85c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,MSIXIndex,HostDisc,FastPath,RDPQArray> "man mpr" mentions LSI-3108 too, and "man mfi" doesn't mention LSI-3xxx chips. Why does "mfi" attaches to LSI-3xxx? What is proper driver for these chips? -- // Lev Serebryakov
signature.asc
Description: OpenPGP digital signature
