Try this (with a very recent kernel):

cat /dev/audio

It locks up my machine.  Also, anything that accesses /dev/audio locks up
my machine, such as mpg123.

- Donn
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Tue Jul 18 18:45:36 EDT 2000
    [EMAIL PROTECTED]:/usr/src/sys/compile/CUSTOM
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium/P55C (166.45-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x543  Stepping = 3
real memory  = 62914560 (61440K bytes)
avail memory = 57487360 (56140K bytes)
Preloaded elf kernel "kernel" at 0xc03bd000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03bd09c.
Intel Pentium detected, installing workaround for F00F bug
seq0-63: Midi sequencers.
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <Host to PCI bridge (vendor=1039 device=5597)> at 0.0
isab0: <SiS 85c503 PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 5591 ATA33 controller> port 
0xd000-0xd00f,0xd400-0xd403,0xd800-0xd807,0xe000-0xe003,0xe400-0xe407 irq 11 at device 
1.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xb800-0xb81f irq 10 at device 10.0 on 
ed0: address 00:c0:df:ed:0b:17, type NE2000 (16 bit) 
pci0: <SiS 5597/98 SVGA controller> at 19.0 irq 11
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
sio2 at port 0x3e8-0x3ef irq 4 on isa0
sio2: type 16550A
mse0: <Bus/InPort Mouse> at port 0x23c-0x23f irq 3 on isa0
mpu0: reset failed.
ppc0: <ECP parallel printer port> at port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0303> can't assign resources
sbc1: <ESS ES1868> at port 0x220-0x22f,0x388-0x38b,0x330-0x331 irq 5 drq 1,0 on isa0
pcm0: <ESS 18xx DSP> on sbc1
midi1: <SB Midi Interface> on sbc1
midi2: <SB OPL FM Synthesizer> on sbc1
ad0: 3093MB <FUJITSU MPB3032ATU> [6704/15/63] at ata0-master using UDMA33
ad1: 1040MB <M1614TA> [2114/16/63] at ata0-slave using WDMA2
acd0: CDROM <BCD-24X 1997-06-27> at ata1-master using WDMA2

Reply via email to