On Thu, 15 Sep 2022, Ivan Quitschal wrote:
On Thu, 15 Sep 2022, Ivan Quitschal wrote:
On Thu, 15 Sep 2022, Hans Petter Selasky wrote:
On 9/15/22 17:18, Hans Petter Selasky wrote:
On 9/15/22 17:16, Ivan Quitschal wrote:
Hi All
Does anybody have any idea what could be happening here?.
I have a laptop DELL INSPIRON 3511 and everything works just fine,
literally everything. even the iwlwifi0.
But in order to use my full 600mbps, i dont use the wireless but a
TP-LINK USB ethernet connected on "ue0"
ugen0.6: <TP-Link USB 10/100/1000 LAN> at usbus0, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=ON (200mA)
but something really strange is happening .. everytime i open the
chromium e do a speedtest (could be speedtest.net or any other) , at the
end of the test the eth interface dies .. it changes from full-duplex to
half-duplex/no carrier and the only way to get the internet back thru
ue0 is by rebooting the whole thing.
not even a "service netif restart" does anything
if anyone has any ideas why is that , would be appreciated
Hi,
I think it some new features they use in the USB data protocol which we
don't support. Check the Linux code.
Between does:
usbconfig -d 0.6 reset
recover the device?
--HPS
Hi,
Search for axge on bugzilla:
I suspect you are using this chipset:
Try:
usbconfig show_ifdrv
To know for sure.
Also see:
https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbugs.freebsd.org%2Fbugzilla%2Fshow_bug.cgi%3Fid%3D210488&data=05%7C01%7C%7C84d8684abc754f0596a108da97302431%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637988530285207791%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=Lrg%2Fy3DsJOZj8MedxLJz2nkpm0swb8W%2F%2Bk1ZoRPKMT8%3D&reserved=0
--HPS
Hi Hans,
actually the driver i use is not agxe (i thought it would be by the time i
bought the usbcard)
this is the module im using
if_ure.ko
and thank you , yes, reseting the usb entry with your command worked just
fine.
i got the internet back after doing this
usbconfig -d 0.6 reset
do we have a bug here then?
thank you
--tzk
oh, i forgot to mention that the ure driver freezes not during the download
test but in the middle of the upload, always
dont know if that helps
thanks
--tzk
hi Hans
i've seen you made 2 patches for ure driver which looked like a little with the
problem im having here.
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=256675
problem is, its not compiling any longer, code must have changed since you made
the patch.
regarding the "axge" bugzilla you sent me , THATS EXACTLY the problem im
having. The workaround for the guy's problem
was doing this:
# ifconfig ue0 media 1000baseT mediaopt flow
problem is, my ure/ue0 interface does not have that option "flow"
-----------------------------
[tzk@tzk-inspiron ~ ]$ ifconfig -m ue0
ue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=68009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
capabilities=68009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
ether 54:af:97:86:be:2c
inet 192.168.0.35 netmask 0xffffff00 broadcast 192.168.0.255
media: Ethernet 1000baseT <full-duplex>
status: active
supported media:
media autoselect
media 1000baseT mediaopt full-duplex,master
media 1000baseT mediaopt full-duplex
media 100baseTX mediaopt full-duplex
media 100baseTX
media 10baseT/UTP mediaopt full-duplex
media 10baseT/UTP
media none
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
--------------------------------
any ideas or any other patch you made ?
appreciate any insights
thanks in advance
--tzk
