My server functions properly (harddrives inside).  My diskless machines
(mounting same filesystems via NFS) are having problems.  Thanks in

bash-2.03$ top
top: nlist failed

bash-2.03$ vmstat
vmstat: undefined symbols:
 _cp_time _kmemstatistics _bucket _zlist

Occurs with both 4.0 and 4.1 (and various in between stages).  As a
related item, harddrives used in LARGE mode can cause the same problem
until changed to LBA.

df output
bash-2.03$ df
Filesystem               1K-blocks     Used    Avail Capacity  Mounted
on                  396895   136078   229066    37%    /
mfs:97                        2943      886     1822    33%    /conf/etc
/conf/etc                     2943      886     1822    33%    /etc
procfs                           4        4        0   100%    /proc
mfs:117                       1951      123     1672     7%    /var
mfs:131                       1511       50     1341     4%    /dev              2977230  1617820  1121232    59%    /usr   14757968 10399126  3178205    77%   
/devel/archive   6216820  5300977   418498    93%   
/devel/archive2         7995310   852075  6503611    12%    /usr/home

dmesg output
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights
FreeBSD 4.1-STABLE #0: Mon Aug  7 11:17:37 EDT 2000
[EMAIL PROTECTED]:/devel/archive2/obj/devel/archive2/src/sys/DISKLESS
Timecounter "i8254"  frequency 1193182 Hz
CPU: AMD-K6(tm) 3D processor (400.91-MHz 586-class CPU)
  Origin = "AuthenticAMD"  Id = 0x58c  Stepping = 12
  AMD Features=0x80000800<SYSCALL,3DNow!>
real memory  = 268435456 (262144K bytes)
avail memory = 258564096 (252504K bytes)
K6-family MTRR support enabled (2 registers)
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0
on pci0
pci1: <PCI bus> on pcib2
pci1: <NVidia Riva TNT2 graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C586 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C586 ATA33 controller> port 0xe000-0xe00f at device 7.1
on pci0
pci0: <NVidia/SGS-Thomson Riva128 graphics accelerator> at 9.0 irq 10
pcm0: <AudioPCI ES1371> port 0xe800-0xe83f irq 12 at device 10.0 on pci0
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xec00-0xec3f irq 5 at
device 11.0 on pci0
xl0: Ethernet address: 00:60:97:de:4e:38
miibus0: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
bootpc_init: wired to interface 'xl0'
bootpc_init: using network interface 'xl0'
Bootpc testing starting
bootpc hw address is 0:60:97:de:4e:38
My ip address is
Server ip address is
Gateway ip address is
Server name is
boot file is /kernel.diskless
Subnet mask is
Router is
Ignoring field type 15
rootfs is
Ignoring field type 28
Mounting root from nfs:

Rod Taylor

"People get annoyed when you try to debug them." -- Larry Wall, 2nd
State of the Onion.

"A + B + C = Success if, A = Hard Work, B = Hard Play, C = Keeping your
mouth shut." -- Albert Einstein


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message

Reply via email to