I just updated my sources after a few days and reconfiged, recompiled & booted 
a machine with with a NCR810a card. It panicked partway through the boot 
messages (prior to mounting filesystems) saying that it couldn't allocate 
space for sym1's data. The previous kernel correctly found only one sym 
device. The dmesg from the older working kernel is attached.

Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Wed Aug 23 21:39:01 CDT 2000
    [EMAIL PROTECTED]:/usr/src/sys/compile/bleep
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 399665724 Hz
CPU: AMD-K6(tm) 3D processor (399.67-MHz 586-class CPU)
  Origin = "AuthenticAMD"  Id = 0x58c  Stepping = 12
  AMD Features=0x80000800<SYSCALL,3DNow!>
real memory  = 67043328 (65472K bytes)
avail memory = 61591552 (60148K bytes)
Preloaded elf kernel "kernel.old" at 0xc03ab000.
K6-family MTRR support enabled (2 registers)
VESA: v2.0, 4096k memory, flags:0x1, mode table:0xc0332a02 (1000022)
VESA: Matrox Graphics Inc.
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <VIA 82C598MVP (Apollo MVP3) host bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <VIA 82C598MVP (Apollo MVP3) host bridge> at 0.0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
isab0: <VIA 82C586 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C586 ATA33 controller> port 0x6400-0x640f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <VIA 82C586B ACPI interface> at 7.3
dc0: <82c169 PNIC 10/100BaseTX> port 0x6c00-0x6cff mem 0xe9002000-0xe90020ff irq 9 at 
device 9.0 on pci0
dc0: Ethernet address: 00:a0:cc:63:fe:93
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sym0: <810a> port 0x7000-0x70ff mem 0xe9000000-0xe90000ff irq 7 at device 10.0 on pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
de0: <Digital 21140 Fast Ethernet> port 0x7400-0x747f mem 0xe9001000-0xe900107f irq 5 
at device 11.0 on pci0
de0: SMC 9332DST 21140 [10-100Mb/s] pass 1.2
de0: address 00:00:c0:a6:59:dc
de0: enabling 10baseT port
pci0: <Matrox MGA Millennium II 2164W graphics accelerator> at 12.0 irq 10
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 flags 0x10 on isa0
sio1: type 16550A
pca0 at port 0x40 on isa0
ppc0: parallel port not found.
unknown: <PNP0303> can't assign resources
pca1: <AT-style speaker sound> at port 0x61 on isa0
unknown: <PNP0f13> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0501> can't assign resources
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, 
default to accept, logging limited to 100 packets/entry by default
IPsec: Initialized Security Association Processing.
ad0: 4103MB <ST34321A> [8894/15/63] at ata0-master using UDMA33
ata1-master: DMA limited to UDMA33, non-ATA66 compliant cable
ad1: 19569MB <WDC WD205AA-32BAA0> [39761/16/63] at ata1-master using UDMA33
acd0: CDROM <ATAPI 40X CDROM> at ata1-slave using UDMA33
Waiting 6 seconds for SCSI devices to settle
(probe6:sym0:0:6:0): phase change 6-7 6@00fcd18c resid=4.
sa0 at sym0 bus 0 target 0 lun 0
sa0: <EXABYTE EXB-85058SQANXR1 0781> Removable Sequential Access SCSI-2 device 
sa0: 5.000MB/s transfers (5.000MHz, offset 8)
sa1 at sym0 bus 0 target 6 lun 0
sa1: <EMERALD TDC 3800 R02.> Removable Sequential Access SCSI-CCS device 
sa1: 3.300MB/s transfers
Mounting root from ufs:/dev/ad0a
WARNING: / was not properly dismounted
pid 271 (ldconfig), uid 0: exited on signal 11 (core dumped)
  The views expressed above are not those of PGS Tensor.

    "We've heard that a million monkeys at a million keyboards could produce
     the Complete Works of Shakespeare; now, thanks to the Internet, we know
     this is not true."            Robert Wilensky, University of California

Reply via email to