Hi all,
i have a Fujitsu-Siemens Lifebook C Series notebook, which is equipped
with a D-Link DFE-650 NE-2000 Compatible PCCard Ethernet. on 4.1-RELEASE
it works like a charm - once you have an 'ed' driver in the kernel,
pccardd attaches it to the card and all is fine. Today I upgraded
the laptop to 5.0-CURRENT (to be in sync with my desktop machines) and
the card stopped working - the pccardd daemon correctly identifies
it as a DFE-650 but fails to attach a driver to it.
the 'ed' driver is in the kernel, the /boot/device.hints section for 'ed'
is the default one.
the messages are:
pccardd[58]: Card "D-Link"("DFE-650") [Fast Ethernet] [(null)] matched "D-Link
("DFE-650") [(null)] [(null)]
pccardd[58]: driver allocation failed for D-Link(DFE-650): Device not configured
any suggestions and help would be appreciated.
I am attaching the 'dmesg' output and the kernel config file...
Thanks in advance,
-tacho
--
[i don't follow] | [http://daemonz.org/ || [EMAIL PROTECTED]]
[everything should be made as simple as possible, but no simpler]
0x44FC3339 || [02B5 798B 4BD1 97FB F8DB 72E4 DCA4 BE03 44FC 3339]
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Fri Sep 1 13:50:56 EEST 2000
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/MEERKAT
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 497837727 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (497.84-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x681 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM>
real memory = 134152192 (131008K bytes)
avail memory = 127139840 (124160K bytes)
Preloaded elf kernel "kernel" at 0xc0367000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc036709c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <Intel 82443BX (440 BX) host to PCI bridge> at 0.0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcic-pci0: <TI PCI-1420 PCI-CardBus Bridge> at device 4.0 on pci0
pcic-pci0: TI12XX PCI Config Reg: [speaker enable][pwr save][FUNC pci int + CSC serial
isa irq]
pcic-pci1: <TI PCI-1420 PCI-CardBus Bridge> at device 4.1 on pci0
pcic-pci1: TI12XX PCI Config Reg: [speaker enable][pwr save][FUNC pci int + CSC serial
isa irq]
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1040-0x104f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 11
pci0: <Intel 82371AB Power management controller> at 7.3
pci0: <unknown card> (vendor=0x1013, dev=0x6005) at 8.0 irq 5
pci0: <unknown card> (vendor=0x127a, dev=0x2015) at 16.0 irq 11
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources
pca0: <AT-style speaker sound> at port 0x61 on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0400> can't assign resources
unknown: <PNP0700> can't assign resources
pccard: card inserted, slot 1
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad0: 5729MB <FUJITSU MHK2060AT> [12416/15/63] at ata0-master using UDMA33
acd0: CDROM <_NEC CDR-2800C> at ata1-master using UDMA33
Mounting root from ufs:/dev/ad0s2a
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.FreeBSD.org/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the NOTES configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.273 2000/09/01 07:51:23 msmith Exp $
machine i386
#cpu I386_CPU
#cpu I486_CPU
#cpu I586_CPU
cpu I686_CPU
ident MEERKAT
maxusers 32
#To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" #Default places to look for devices.
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
#options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options SOFTUPDATES #Enable FFS soft updates support
options MFS #Memory Filesystem
#options DEVFS #Device Filesystem
options MD_ROOT #MD is a potential root device
options NFS #Network Filesystem
options NFS_ROOT #NFS usable as root device, NFS required
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root, CD9660 required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options RANDOMDEV #entropy device
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
# Optionally these may need tweaked, (defaults shown):
#options NCPU=2 # number of CPUs
#options NBUS=8 # number of busses
#options NAPIC=1 # number of IO APICs
#options NINTR=24 # number of INTs
device isa
#device eisa
device pci
#options COMPAT_OLDISA # compatability shims for lnc, fe, le
#options COMPAT_OLDPCI # compatability shims for lnc, vx
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
#device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices
# SCSI Controllers
#device ahb # EISA AHA1742 family
#device ahc # AHA2940 and onboard AIC7xxx devices
#device amd # AMD 53C974 (Teckram DC-390(T))
#device isp # Qlogic family
#device ncr # NCR/Symbios Logic
#device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
#device adv
#device adw
#device bt
#device aha 1
#device aic
# RAID controllers interfaced to the SCSI subsystem
#device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
#device dpt # DPT Smartcache III, IV - See NOTES for options!
#device mly # Mylex AcceleRAID/eXtremeRAID
# SCSI peripherals
#device scbus # SCSI bus (required)
#device da # Direct Access (disks)
#device sa # Sequential Access (tape etc)
#device cd # CD
#device pass # Passthrough device (direct SCSI access)
# RAID controllers
#device ida # Compaq Smart RAID
#device amr # AMI MegaRAID
#device mlx # Mylex DAC960 family
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc 1
device atkbd
device psm
device vga
# splash screen/screen saver
device splash
# syscons is the default console driver, resembling an SCO console
device sc 1
# Enable this for the pcvt (VT220 compatible) console driver
#device vt
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
# Floating point support - do not disable.
device npx
# Power management support (see NOTES for more options)
device apm
# PCCARD (PCMCIA) support
device card
device pcic
# Serial (COM) ports
device sio
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
#device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs.
#device de # DEC/Intel DC21x4x (``Tulip'')
#device fxp # Intel EtherExpress PRO/100B (82557, 82558)
#device tx # SMC 9432TX (83c170 ``EPIC'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')
#device wx # Intel Gigabit Ethernet Card (``Wiseman'')
# PCI Ethernet NICs that use the common MII bus controller code.
#device miibus # MII bus support
#device dc # DEC/Intel 21143 and various workalikes
#device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
#device sis # Silicon Integrated Systems SiS 900/SiS 7016
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device tl # Texas Instruments ThunderLAN
#device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
#device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs.
device ed
#device ex
#device ep
#device cs
#device sn
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attatement needed
# and resources will always be dynamically assigned by the pccard code.
#device wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those paremeters here.
#device an
# BayStack 660 and others
#device awi
# Xircom pccard ethernet
#device xe
# The probe order of these is presently determined by i386/isa/isa_compat.c.
#device ie
#device fe
#device le
#device lnc
# Pseudo devices - the number indicates how many units to allocated.
device loop # Network loopback
device ether # Ethernet support
#device sl # Kernel SLIP
#device ppp 1 # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif 4 # IPv6 and IPv4 tunneling
device faith 1 # IPv6-to-IPv4 relaying (translation)
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device bpf # Berkeley packet filter
# USB support
#device uhci # UHCI PCI->USB interface
#device ohci # OHCI PCI->USB interface
#device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
#device ugen # Generic
#device uhid # "Human Interface Devices"
#device ukbd # Keyboard
#device ulpt # Printer
#device umass # Disks/Mass storage - Requires scbus and da
#device ums # Mouse
#device urio # Diamond Rio 500 MP3 player
# USB Ethernet, requires mii
#device aue # ADMtek USB ethernet
#device cue # CATC USB ethernet
#device kue # Kawasaki LSI USB ethernet
device pcm
device csa
device pca
PGP signature
