After 5 hours the computer had totally locked itself... just a manual
reboot again and doing the fsck on 46gig aint that fun :D
I'll guess i'll do a new make world etc...

output from top:
last pid:   313;  load averages:  1.03,  0.75,  0.37    up 0+00:06:17  
29 processes:  1 running, 28 sleeping
CPU states:  0.0% user,  0.0% nice,  0.4% system,  0.4% interrupt, 99.2%

After 3 minutes more the load average has locked itslef at 1.00 / 0.87 / 

This seem pretty weird behaviour for a box that previously had 0.03 /
0.03 / 0.03 as an average load average...

I also see a problem with the vr driver, at transfers beyond 10mbit it
looks up from time to time, when i used 3.5.1-RELEASE i never had this
problem, i also got higher speeds (7MB/s instead of the now 2.8MB/s) in
3.5.1-RELEASE i used wd0/wd1/wd2 instead of the ad0/ad1/ad2 but i think
the ad device should be faster than the wd device shouldn't it?
Anyway the vr locks up and completly fuck up _every_ session to it and
leaves an "vr0: watchdog timeout" in the console every time.
I have also noticed if i use the samba shares on the freebsd computer from
my other windows 98 se computer i can get this too (but not as many).
If i use ftp to transfer files and i use the samba network then i'm bound
to get them all the time.

dmesg output
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #8: Mon Sep 11 14:27:37 GMT 2000
    [EMAIL PROTECTED]:/usr/src/sys/compile/worldclass
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 350795893 Hz
CPU: AMD-K6(tm) 3D processor (350.80-MHz 586-class CPU)
  Origin = "AuthenticAMD"  Id = 0x58c  Stepping = 12
  AMD Features=0x80000800<SYSCALL,3DNow!>
real memory  = 33554432 (32768K bytes)
config> di sn0
config> di lnc0
config> di le0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> q
avail memory = 29614080 (28920K bytes)
Preloaded elf kernel "kernel.ko" at 0xc032c000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc032c0a0.
K6-family MTRR support enabled (2 registers)
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <AcerLabs M1541 (Aladdin-V) PCI host bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <AcerLabs M5243 PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Intel i740 AGP SVGA controller> at 0.0 irq 10
pci0: <AcerLabs M5237 (Aladdin-V) USB controller> at 2.0 irq 11
isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
vr0: <VIA VT3043 Rhine I 10/100BaseTX> port 0xdc00-0xdc7f mem
0xdfffef80-0xdfffefff irq 9 at device 14.0 on pci0
vr0: Ethernet address: 00:80:c8:f0:5f:9e
miibus0: <MII bus> on vr0
amphy0: <DM9101 10/100 media interface> on miibus0
amphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci0: <AcerLabs Aladdin ATA33 controller> port 0xffa0-0xffaf irq 0 at
device 15.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
xl0: <3Com 3c900-TPO Etherlink XL> port 0xd880-0xd8bf irq 5 at device 18.0
on pci0
xl0: Ethernet address: 00:60:97:2a:29:c2
xl0: selecting 10baseT transceiver, half duplex
pci0: <unknown card> (vendor=0x1274, dev=0x1371) at 20.0 irq 10
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/1 bytes threshold
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0a03> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0401> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0f13> can't assign resources
IP packet filtering initialized, divert disabled, rule-based forwarding
disabled, default to deny, logging limited to 10 packets/entry by

microuptime() went backwards (1.4671896 -> 1.376969)
microuptime() went backwards (1.4671896 -> 1.377542)
ad0: 2503MB <FUJITSU MPA3026ATU> [5086/16/63] at ata0-master using UDMA33
microuptime() went backwards (1.4671896 -> 1.400150)
microuptime() went backwards (1.4671896 -> 1.400721)
ata0-slave: DMA limited to UDMA33, non-ATA66 compliant cable
ad1: 19547MB <FUJITSU MPE3204AT> [39714/16/63] at ata0-slave using UDMA33
microuptime() went backwards (1.4671896 -> 1.408150)
microuptime() went backwards (1.4671896 -> 1.408713)
ad2: 19547MB <FUJITSU MPE3204AT> [39714/16/63] at ata1-master using UDMA33
Mounting root from ufs:/dev/ad0s1a
microuptime() went backwards (1.4671896 -> 1.414712)
microuptime() went backwards (1.4671896 -> 1.415286)
WARNING: / was not properly dismounted
microuptime() went backwards (1.4671896 -> 1.425558)
microuptime() went backwards (1.4671896 -> 1.426876)
pid 238 (ldconfig), uid 0: exited on signal 11 (core dumped)

End of dmesg...
why ldconfig always crashes i dont know... it's been like this since i
upgraded from 3.5.1-RELEASE to 5.0-20000902-CURRENT
also all these microuptime() went backwards are a _lot_ more of, i
remember somebody talking about it being related to sound card?

Well anyhow the kernel that is compiled dosn't have support for the sound
card that i have, i havn't included the sound driver.

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message

Reply via email to