Hi,
executing /compat/linux/bin/rpm issues a halt and powerdown under -current
an my TECRA8000.
Is it just me?
Attached is the dmesg.

Bye!
----
Michael Reifenberger
^.*Plaut.*$, IT, R/3 Basis, GPS
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #8: Fri Nov  3 00:07:26 CET 2000
    [EMAIL PROTECTED]:/usr/src/sys/compile/nihil
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (266.62-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x652  Stepping = 2
  
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>

real memory  = 268369920 (262080K bytes)
config> #flags wdc0 0xa0ffa0ff
Invalid command or syntax.  Type `?' for help.
config> #flags wdc1 0xa0ffa0ff
Invalid command or syntax.  Type `?' for help.
config> #iosiz npx0 196608
Invalid command or syntax.  Type `?' for help.
config> #irq pcic0 11
Invalid command or syntax.  Type `?' for help.
config> quit
avail memory = 258048000 (252000K bytes)
Preloaded elf kernel "kernel" at 0xc032c000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc032c09c.
Preloaded elf module "linux.ko" at 0xc032c0ec.
Preloaded elf module "linprocfs.ko" at 0xc032c18c.
Pentium Pro MTRR support enabled
VESA: v2.0, 2496k memory, flags:0x0, mode table:0xc02b0842 (1000022)
VESA: MagicGraph 256 AV 44K PRELIMINARY
Using $PIR table, 6 entries at 0xc00f01e0
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: <NeoMagic MagicMedia 256AV SVGA controller> at 4.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 5.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfe60-0xfe6f at device 5.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 5.2 irq 11
pci0: <Intel 82371AB Power management controller> at 5.3
pci0: <Toshiba Fast Infra Red controller> at 9.0 irq 11
pcic-pci0: <Toshiba ToPIC97 PCI-CardBus Bridge> at device 11.0 on pci0
pcic-pci1: <Toshiba ToPIC97 PCI-CardBus Bridge> at device 11.1 on pci0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 flags 0x40 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pps0: <Pulse per second Timing Interface> on ppbus0
pcic0: <Intel i82365> at port 0x3e0-0x3e1 on isa0
pcic0: Polling mode
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
pmtimer0 on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0401> can't assign resources
unknown: <PNP0e03> can't assign resources
pcm0: <Yamaha OPL-SAx> at port 
0x220-0x233,0x530-0x537,0x388-0x38f,0x330-0x333,0x538-0x539 irq 5 drq 1,0 on isa0
IP packet filtering initialized, divert enabled, rule-based forwarding disabled, 
default to deny, logging limited to 100 packets/entry by default
ad0: 24207MB <IBM-DARA-225000> [49184/16/63] at ata0-master UDMA33
ad1: 6194MB <IBM-DADA-26480> [13424/15/63] at ata1-master UDMA33
Mounting root from ufs:/dev/ad0s1a
pccard: card inserted, slot 0
ep0: <3Com Etherlink III 3C589> at port 0x240-0x24f irq 3 slot 0 on pccard0
ep0: Ethernet address 00:60:97:88:84:9e

Reply via email to