Soren Schmidt wrote:
> I've put patches for 4.2-BETA (diff-4.2) and for -current (diff-5.0)
> on
> Please try them and mail me the dmesg from your system.

After losing ata1 (440BX chipset), I applied the patches to 4.2-BETA
and ata1 was detected again. You can find the dmesg output attached.

-- JMA
****** Jose M. Alcaide  //  [EMAIL PROTECTED]  //  [EMAIL PROTECTED] ******
** "Beware of Programmers who carry screwdrivers" --  Leonard Brandwein **
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.2-BETA #1: Fri Nov 10 13:20:22 CET 2000
    [EMAIL PROTECTED]:/usr/obj/usr/src/sys/FUJITSU
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (501.14-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x673  Stepping = 3
real memory  = 134152192 (131008K bytes)
avail memory = 127586304 (124596K bytes)
Preloaded elf kernel "kernel" at 0xc0304000.
Pentium Pro MTRR support enabled
md0: Malloc disk
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GB graphics accelerator> at 0.0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: mask=03 status0=50 status1=00
probe ATAPI master a=00 b=00
probe ATAPI slave a=00 b=00
ata0: mask=03 status0=50 status1=00
probe ATA master a=01 b=a5
ata0: at 0x1f0 irq 14 on atapci0
ata1: mask=03 status0=50 status1=00
probe ATAPI master a=14 b=eb
probe ATAPI slave a=7f b=7f
ata1: mask=03 status0=00 status1=00
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on 
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd400-0xd43f mem 
0xe9000000-0xe90fffff,0xe9100000-0xe9100fff irq 11 at device 8.0 on pci0
fxp0: Ethernet address 00:90:27:e7:3b:60
pcm0: <ESS Solo-1E> port 
0xe800-0xe803,0xe400-0xe403,0xe000-0xe00f,0xdc00-0xdc0f,0xd800-0xd83f irq 10 at device 
11.0 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ad0: 8223MB <ST38410A> [16708/16/63] at ata0-master UDMA33
acd0: CDROM <LTN403> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s2a

Reply via email to