In message <[EMAIL PROTECTED]>, Dag-Erling Smorgrav 
> Cy Schubert - ITSD Open Systems Group <[EMAIL PROTECTED]> writes:
> > In message <[EMAIL PROTECTED]>, Dag-Erling Smorgrav 
> > writes:
> > > Hmm, I've had a CFP1080S (Antigua) for years, and never experienced
> > > any trouble at all with it. [...]
> > I've got the same drive.  Attached to a 1542B it works fine.  Attached 
> > to a 2940U the filesystem is corrupted within minutes.
> I have it on a 2940UW (factory default settings, except maybe for >1GB
> support) which it shares with a Quantum Atlas II (XP4550W) and a
> Tecmar Travan streamer. Never any trouble. I can mail you a dmesg when
> I get home later tonight.

This is dmesg from when I still had the Conner drive installed.  I've
removed the redundant syslog header.

Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-RELEASE #9: Tue Jan 30 06:59:46 PST 2001
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 119752645 Hz
CPU: Pentium/P54C (119.75-MHz 586-class CPU)
Origin = "GenuineIntel"  Id = 0x52c  
Stepping = 12
real memory  = 83886080 (81920K bytes)
avail memory = 78356480 (76520K bytes)
Preloaded elf kernel "kernel" at 0xc0337000.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371SB (PIIX3) USB controller> at 7.2 irq 9
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0x6000-0x607f mem 0xe4001000-0xe400107f 
irq 5 at device 18.0 on pci0
xl0: Ethernet address: 00:50:da:80:28:96
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus 0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100base TX-FDX, auto
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x6100-0x61ff mem 0xe4000000-0xe4000fff 
irq 5 at device 19.0 on pci0
aic7880: Wide Channel A, SCSI Id=7, 16/255 SCBs
pci0: <S3 Trio graphics accelerator> at 20.0 irq 12
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0
x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fd1: <1200-KB 5.25" drive> on fdc0 drive 1
aha0 at port 0x330-0x333 irq 11 drq 5 on isa0
aha0: AHA-1542CF FW Rev. C.0 (ID=45) SCSI Host Adapter, SCSI ID 7, 16 CCBs
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 
0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ep0: <3Com 3C509-Combo EtherLink III> at port 0x300-0x30f irq 10 on isa0
ep0: Ethernet address 00:60:97:d3:32:3e
IP packet filtering initialized, divert enabled,
rule-based forwarding enabled, default to deny, unlimited logging
DUMMYNET initialized (000608)
IP Filter: v3.4.16 initialized.  Default = block all, Logging = enabled
ad0: 2014MB <WDC AC22100H> [4092/16/63] at ata0-master WDMA2
ad2: 2441MB <WDC AC22500L> [4960/16/63] at ata1-master WDMA2
Waiting 15 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 4 lun 0
sa0: <ARCHIVE Python 28388-XXX 5.45> Removable Se quential Access SCSI-2 device
sa0: 7.812MB/s transfers (7.812MHz, offset 15) da1 at ahc0 bus 0 target 1 lun 0
da1: <SEAGATE ST34520N 1487> Fixed Direct Access SCSI-2 device da1: 10.000MB/s 
transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da1: 4340MB (8888924 512 byte sectors: 64H 32S/T 4340C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <CONNER CFP1080S 4649> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 15)
da0: 1030MB (2110812 512 byte sectors: 64H 32S/T 1030C)
Mounting root from ufs:/dev/ad0s1a
cd0 at ahc0 bus 0 target 2 lun 0
cd0: <PLEXTOR CD-ROM PX-4XCH 1.22> Removable CD-ROM SCSI-2 device
cd0: 4.032MB/s transfers (4.032MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da2 at aha0 bus 0 target 6 lun 0
da2: <IOMEGA ZIP 100 D.09> Removable Direct Acces s SCSI-2 device
da2: 3.300MB/s transfers   
da2: Attempt to query device size failed: NOT READY, Medium not present 

Regards,                         Phone:  (250)387-8437
Cy Schubert                        Fax:  (250)387-5766
Team Leader, Sun/Alpha Team   Internet:  [EMAIL PROTECTED]
Open Systems Group, ITSD, ISTA
Province of BC

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message

Reply via email to