Hello, My question is:
  My sound card is CS423X, FreeBSD supports it. It
says: pcm1: <CS423x> at port
0x534-0x537,0x388-0x38b,0x220-0x22f irq 5 drq 1,0 on
. But my system is FreeBSD-current, the /dev file
system I can't write, can't use sh MAKEDEV snd0, and
all software to look for /dev/mixer0 ..
  So how could to now?

my dmesg:
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
1991, 1992, 1993, 1994
        The Regents of the University of California. All
rights reserved.
FreeBSD 5.0-CURRENT #0: Wed Feb 21 19:57:08 GMT 2001
[EMAIL PROTECTED]:/usr/home/src-cur/sys/compile/bigbear
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 300685261 Hz
CPU: AMD-K6tm w/ multimedia extensions (300.69-MHz
586-class CPU)
  Origin = "AuthenticAMD"  Id = 0x570  Stepping = 0
  AMD Features=0x400<<b10>>
real memory  = 67108864 (65536K bytes)
avail memory = 61530112 (60088K bytes)
Preloaded elf kernel "kernel" at 0xc03b5000.
seq0-15: Midi sequencers.
Using $PIR table, 4 entries at 0xc00fdc10
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C586 ATA33 controller> port
0xe000-0xe00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, USB> at 7.2 (no driver attached)
pci0: <old, non-VGA display device> at 7.3 (no driver
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port
0xe800-0xe81f irq 10 at device 10.0 on pci0
ed0: address 00:e0:4c:dd:a0:ec, type NE2000 (16 bit) 
pci0: <display, VGA> at 12.0 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> at port
0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7
irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0401> can't assign resources
unknown: <PNP0501> can't assign resources
pcm1: <CS423x> at port
0x534-0x537,0x388-0x38b,0x220-0x22f irq 5 drq 1,0 on
ad0: 4112MB <WDC AC14300R> [8912/15/63] at ata0-master
ad1: 2014MB <QUANTUM FIREBALL ST2.1A> [4092/16/63] at
ata0-slave UDMA33
acd0: CDROM <LTN341> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s1a
cd9660: RockRidge Extension

my dev:
acd0a           dsp1.0          ppi0            sequencer9      ttyv5
acd0c           dsp1.1          psm0            sndstat         ttyv6
ad0             dspW1.0         random          stderr          ttyv7
ad0s1a          dspW1.1         sequencer0      stdin           ttyv8
ad0s1b          fd              sequencer1      stdout          ttyv9
ad0s1e          fd0             sequencer10     sysmouse        ttyva
ad1             io              sequencer11     tty             ttyvb
audio1.0        kbd0            sequencer12     ttyd0           ttyvc
audio1.1        klog            sequencer13     ttyd1           ttyvd
bpsm0           kmem            sequencer14     ttyid0          ttyve
console         log             sequencer15     ttyid1          ttyvf
consolectl      lpt0            sequencer2      ttyld0          urandom
cuaa0           lpt0.ctl        sequencer3      ttyld1          vga
cuaa1           mdctl           sequencer4      ttyv0           zero
cuaia0          mem             sequencer5      ttyv1
cuaia1          mixer1          sequencer6      ttyv2
cuala0          null            sequencer7      ttyv3
cuala1          pci             sequencer8      ttyv4

my df:
Filesystem  1K-blocks     Used    Avail Capacity 
Mounted on
/dev/ad0s1a    228207    98219   111732    47%    /
devfs               1        1        0   100%   
/dev/ad0s1e   3460132  1892196  1291126    59%    /usr
procfs              4        4        0   100%   
/dev/acd0a     659010   659010        0   100%   

Do You Yahoo!?
Yahoo! Auctions - Buy the things you want at great prices! http://auctions.yahoo.com/

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message

Reply via email to