On Wed, Mar 14, 2001 at 12:49:01AM -0800, Alex Zepeda wrote:

> The kernel that seems to work was built on Feb 18th, and the ones that
> aren't are from as recently as March 13th.

D'oh.  Forgot the kernel config file and dmesg output.

The config file hasn't changed, but the dmesg output is (obviously) from
the older kernel.

- alex
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #2: Sun Feb 18 19:07:27 PST 2001
    [EMAIL PROTECTED]:/usr/src/sys/compile/ZIPPY_SMP
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (451.03-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x652  Stepping = 2
real memory  = 134152192 (131008K bytes)
avail memory = 125919232 (122968K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  0, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc048b000.
WARNING: size of kinfo_proc (648) should be 644!!!
seq0-15: Midi sequencers.
Pentium Pro MTRR support enabled
Using $PIR table, 7 entries at 0xc00fdcf0
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard
IOAPIC #0 intpin 19 -> irq 2
IOAPIC #0 intpin 17 -> irq 9
IOAPIC #0 intpin 18 -> irq 10
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
IOAPIC #0 intpin 16 -> irq 11
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
Warning, ithread (19, irq14: ata0) is an entropy source.
ata1: at 0x170 irq 15 on atapci0
Warning, ithread (20, irq15: ata1) is an entropy source.
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f irq 2 at device 
7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
intpm0: <Intel 82371AB Power management controller> port 0x5000-0x500f irq 9 at device 
7.3 on pci0
intpm0: I/O mapped 5000
intpm0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus general purpose I/O> on smbus0
intpm0: PM I/O mapped 4000 
pci0: <display, VGA> at 9.0 (no driver attached)
fxp0: <Intel InBusiness 10/100 Ethernet> port 0xe400-0xe43f mem 
0xdb000000-0xdb0fffff,0xdb100000-0xdb100fff irq 10 at device 10.0 on pci0
fxp0: Ethernet address 00:90:27:d1:83:6a
isa0: unexpected small tag 14
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sbc0: <Creative SB AWE64> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on 
pcm0: <SB16 DSP 4.16> on sbc0
midi0: <SB Midi Interface> on sbc0
midi1: <SB OPL FM Synthesizer> on sbc0
joy0: <Generic PnP Joystick> at port 0x200-0x207 on isa0
midi2: <CTL0022 WaveTable Synthesizer> at port 0x620-0x623,0xa20-0xa23,0xe20-0xe23 on 
emu2: DRAM size = 512KB
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
sio0: <16550A-compatible COM port> at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
unknown: <PNP0700> can't assign resources
ppc0: <ECP parallel printer port> at port 0x378-0x37f,0x778-0x77a irq 7 drq 3 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio1: <16550A-compatible COM port> at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
IPsec: Initialized Security Association Processing.
ncp_load: [210-213]
ad0: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata0-master UDMA33
Mounting root from ufs:/dev/ad0s3a
WARNING: / was not properly dismounted
SMP: AP CPU #1 Launched!
lock order reversal
 1st vnode interlock last acquired @ ../../ufs/ffs/ffs_vfsops.c:396
 2nd 0xc03ff0a0 mntvnode @ ../../ufs/ffs/ffs_vfsops.c:457
 3rd 0xc815bc8c vnode interlock @ ../../kern/vfs_subr.c:1871
machine         i386
cpu             I686_CPU
ident           ZIPPY_SMP
maxusers        72

makeoptions     DEBUG=-g                #Build kernel with gdb(1) debug symbols

options         INET                    #InterNETworking
options         INET6                   #IPv6 communications protocols
options         FFS                     #Berkeley Fast Filesystem
options         SOFTUPDATES             #Enable FFS soft updates support
options         DEVFS                   #Device Filesystem
options         NFS                     #Network Filesystem
options         MSDOSFS                 #MSDOS Filesystem
options         CD9660                  #ISO 9660 Filesystem
options         PROCFS                  #Process filesystem
options         COMPAT_43               #Compatible with BSD 4.3 [KEEP THIS!]
options         UCONSOLE                #Allow users to grab the console
options         USERCONFIG              #boot -c editor
options         VISUAL_USERCONFIG       #visual boot -c editor
options         KTRACE                  #ktrace(1) support
options         SYSVSHM                 #SYSV-style shared memory
options         SYSVMSG                 #SYSV-style message queues
options         SYSVSEM                 #SYSV-style semaphores
options         P1003_1B                #Posix P1003_1B real-time extensions
#options                _KPOSIX_VERSION=199309L
options         KBD_INSTALL_CDEV        # install a CDEV entry in /dev
device          random                  #entropy device

# To make an SMP kernel, the next two are needed
options         SMP                     # Symmetric MultiProcessor Kernel
options         APIC_IO                 # Symmetric (APIC) I/O

device          isa
device          pci

# Floppy drives
device          fdc

# ATA and ATAPI devices
device          ata
device          atadisk                 # ATA disk drives
device          atapicd                 # ATAPI CDROM drives
device          atapifd                 # ATAPI floppy drives
options         ATA_STATIC_ID           #Static device numbering
#options        ATA_ENABLE_ATAPI_DMA    #Enable DMA on ATAPI devices

#options                USER_LDT
options         DDB
options         WITNESS
options         INVARIANTS
options         INVARIANT_SUPPORT
options         PERFMON
options         NETATALK
#options                NCP

# SCSI peripherals
device          scbus           # SCSI bus (required)

# atkbdc0 controls both the keyboard and the PS/2 mouse
device          atkbdc
device          atkbd
device          psm

device          vga

# splash screen/screen saver
device          splash

# syscons is the default console driver, resembling an SCO console
device          sc

# Floating point support - do not disable.
device          npx

# Power management support (see NOTES for more options)
device          apm

# Serial (COM) ports
device          sio

# Parallel port
device          ppc
device          ppbus           # Parallel port bus (required)
device          lpt             # Printer
device          plip            # TCP/IP over parallel
device          ppi             # Parallel port interface device

# PCI Ethernet NICs.
device          miibus          # MII bus support
device          fxp             # Intel EtherExpress PRO/100B (82557, 82558)

# Pseudo devices - the number indicates how many units to allocated.
device          loop            # Network loopback
device          ether           # Ethernet support
device          tun             # Packet tunnel.
device          pty             # Pseudo-ttys (telnet etc)
device          md              # Memory "disks"
device          gif             # IPv6 and IPv4 tunneling
device          faith           # IPv6-to-IPv4 relaying (translation)

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device          bpf             # Berkeley packet filter

# USB support
device          uhci            # UHCI PCI->USB interface
device          ohci            # OHCI PCI->USB interface
device          usb             # USB Bus (required)
#device         udbp            # USB Double Bulk Pipe devices
device          ugen            # Generic
device          uhid            # "Human Interface Devices"
device          ukbd            # Keyboard
device          ulpt            # Printer
device          umass           # Disks/Mass storage - Requires scbus and da
device          ums             # Mouse
device          urio            # Diamond Rio 500 MP3 player

device          snp
#device         acpi
#device         midi
device          pcm
device          joy
device          smbus
device          intpm
device          smb
device          iicbus
device          iicbb
device          ic
device          iic
device          iicsmb
#device         pcf
options         PPC_PROBE_CHIPSET
device          seq
options         IPSEC
options         IPSEC_ESP
options         IPSEC_DEBUG
options         IPV6FIREWALL
options         IPFIREWALL
options         IPDIVERT
options         NETGRAPH
options         NETGRAPH_BPF
options         NETGRAPH_PPP
options         NETGRAPH_ASYNC

Reply via email to