My kernel compiled from -current sources as of today morning hangs after
recognizing the sound hardware, the last line display is:

pcm0: <Yamaha OPL-SAx> at port 
0x240-0x24f,0xe80-0xe87,0x388-0x38f,0x300-0x301,0x100-0x101 irq 7 drq 0,1 on isa0

Ctrl-Alt-Esc does not work. I'll be compiling a kernel with the latest sources
but without the latest sound driver update later today to verify if the sound
driver is indeed causing the trouble.  Kernel config file and dmesg from a
working kernel is included below.

machine         i386
cpu             I486_CPU
cpu             I586_CPU
cpu             I686_CPU
ident           GOLD
maxusers        32
makeoptions     DEBUG=-g
options         INET
options         IPSEC
options         IPSEC_ESP
options         FFS
options         SOFTUPDATES
options         DEVFS
options         NFS
options         MSDOSFS
options         CD9660
options         PROCFS
options         COMPAT_43
options         SCSI_DELAY=5000
options         UCONSOLE
options         USERCONFIG
options         VISUAL_USERCONFIG
options         KTRACE
options         SYSVSHM
options         SYSVMSG
options         SYSVSEM
options         P1003_1B
options         COMPAT_LINUX
options         DDB
options         IPFIREWALL
options         IPDIVERT
options         INCLUDE_CONFIG_FILE
device          isa
device          pci
device          fdc
device          ata
device          atadisk
device          atapicd
device          atkbdc  1
device          atkbd
options         ATKBD_DFLT_KEYMAP
makeoptions     ATKBD_DFLT_KEYMAP="si.iso"
device          psm
device          vga
device          splash
options         SC_DFLT_FONT
makeoptions     SC_DFLT_FONT=iso02
device          sc      1
device          npx
device          apm
device          pcm
device          sio
device          miibus
device          xl
device          card
device          pcic
#device         pccard
#device         cardbus
#device         pcic
#device         pccbb
device          wi
device          loop
device          ether
device          tun
device          pty
device          bpf
device          md
device          random
options         ELSA_QS1ISA
device          isic
device          "i4bq921"
device          "i4bq931"
device          "i4b"
device          "i4btrc"        4
device          "i4bctl"
device          "i4brbch"       4
device          "i4btel"        2
device          "i4bisppp"      4

Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #3: Tue Mar 20 19:16:42 CET 2001
    [EMAIL PROTECTED]:/home/blaz/FreeBSD/src/sys/compile/GOLD
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium/P55C (232.88-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x543  Stepping = 3
real memory  = 67108864 (65536K bytes)
avail memory = 61153280 (59720K bytes)
Preloaded elf kernel "kernel" at 0xc0414000.
Intel Pentium detected, installing workaround for F00F bug
Using $PIR table, 6 entries at 0xc00fdf60
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcf0-0xfcff at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, USB> at 7.2 (no driver attached)
pci0: <bridge, PCI-unknown> at 7.3 (no driver attached)
pci0: <display, VGA> at 13.0 (no driver attached)
xl0: <3Com 3c900-TPO Etherlink XL> irq 7 at device 14.0 on pci0
xl0: failed to enable I/O ports!
device_probe_and_attach: xl0 attach returned 6
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pcic0: <Vadem 469> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isic0: <ELSA QuickStep 1000pro> at port 0x160-0x167 irq 5 on isa0
isic0: passive stack unit 0
pcm0: <Yamaha OPL-SAx> at port 
0x240-0x24f,0xe80-0xe87,0x388-0x38f,0x300-0x301,0x100-0x101 irq 7 drq 0,1 on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0f13> can't assign resources
i4bctl: ISDN system control port attached
i4btrc: 4 ISDN trace device(s) attached
i4bisppp: 4 ISDN SyncPPP device(s) attached (VJ header compression)
i4b: ISDN call control device attached
IP packet filtering initialized, divert enabled, rule-based forwarding disabled, 
default to accept, logging disabled
i4btel: 2 ISDN telephony interface device(s) attached
i4brbch: 4 raw B channel access device(s) attached
IPsec: Initialized Security Association Processing.
pccard: card inserted, slot 0
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad0: 13783MB <IBM-DTTA-371440> [28005/16/63] at ata0-master UDMA33
ad1: 6179MB <Maxtor 90648D5> [12555/16/63] at ata0-slave UDMA33
acd0: CDROM <CD-540E> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
wi0: <WaveLAN/IEEE 802.11> at port 0x280-0x2bf irq 10 slot 0 on pccard0
wi0: Ethernet address: 00:60:1d:f1:15:bb

Blaz Zupan,  Medinet d.o.o, Linhartova 21, 2000 Maribor, Slovenia
E-mail: [EMAIL PROTECTED], Tel: +386-2-320-6320, Fax: +386-2-320-6325

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message

Reply via email to