I recently updated my laptop (dell latitude CSx) from a 20010115-CURRENT
snapshot (using cvsup/make world), and NEWCARD is now giving me some
problems.. (I'm up to date as of 3/30 at this point..)

if I boot to a NEWCARD kernel, it freezes just before the cardbus bridge
is probed..  at that point I've tried to drop into DDB, but it's either
not available yet, or the system's hung completely..  I'm including the
dmesg output up to that point at the end of this mail...

The last line I see is:
pcm0: <NeoMagic 256ZX> mem 0xfda00000-0xfdafffff,0xf9800000-0xf9ffffff irq
5 at device 0.1 on pci1

my NEWCARD config is basically NEWCARD with NMBCLUSTERS=1024 ...

GENERIC works fine, as does my old 20010115 snapshot kernel..

somtimes if I boot to either working kernel, I can then do a
reboot/shutdown -r and boot to my new NEWCARD kernel, it'll boot just
fine, until the next power off.. although occasionally not :-/

any tips on where to look, what to do next?  bios settings are default, my
pcmcia cards are removed...

dmesg of a failed boot:
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #1: Thu Mar 31 13:13:58 GMT 2001
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 498471802 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (498.47-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
real memory  = 268353536 (262064K bytes)
avail memory = 256061440 (250060K bytes)
Preloaded elf kernel "kernel" at 0xc059b000.
Pentium Pro MTRR support enabled
WARNING: Driver mistake: destroy_dev on 154/0
Using $PIR table, 5 entries at 0xc00fbd80
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at 0.0 (no driver attached)
pcm0: <NeoMagic 256ZX> mem 0xfda00000-0xfdafffff,0xf9800000-0xf9ffffff irq 5 at device 
0.1 on pci1


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message

Reply via email to