Hi,
a few things to note:
- Loading the new kernel & acpi.ko with the old loader freezes the loader.
- Loading acpi.ko by hand with the new loader freezes or endless-loops the loader.
- Letting the new loader using the acpi.ko brings the system up and running except my
sound-system
(missing equivalent to isa_probe_children: probing PnP devices?)
Dmesg's with & without acpi:
### with new ACPI ###
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Thu Aug 30 16:25:32 CEST 2001
root@nihil:/usr/src/sys/i386/compile/nihil
Calibrating clock(s) ... TSC clock: 266605716 Hz, i8254 clock: 1193143 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 266616245 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (266.62-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 268369920 (262080K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x003b4000 - 0x0ffe7fff, 264454144 bytes (64564 pages)
avail memory = 257630208 (251592K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fc470
bios32: Entry = 0xfc480 (c00fc480) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x827
pnpbios: Found PnP BIOS data at 0xc00fed00
pnpbios: Entry = f0000:92e4 Rev = 1.0
pnpbios: Event flag at 510
pnpbios: OEM ID 7933f351
Other BIOS signatures found:
Preloaded elf kernel "kernel" at 0xc038e000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc038e0a8.
Preloaded elf module "md.ko" at 0xc038e0f8.
Preloaded elf module "if_dc.ko" at 0xc038e194.
Preloaded elf module "miibus.ko" at 0xc038e234.
Preloaded elf module "snd_mss.ko" at 0xc038e2d4.
Preloaded elf module "snd_pcm.ko" at 0xc038e374.
Preloaded elf module "usb.ko" at 0xc038e414.
Preloaded elf module "ums.ko" at 0xc038e4b0.
Preloaded elf module "if_ep.ko" at 0xc038e54c.
Preloaded elf module "acpi.ko" at 0xc038e5ec.
mem: <memory & I/O>
Pentium Pro MTRR support enabled
VESA: information block
56 45 53 41 00 02 20 01 00 01 00 00 00 00 22 00
00 01 27 00 13 00 00 01 00 01 09 01 00 01 1b 01
00 01 00 01 01 01 02 01 03 01 04 01 05 01 07 01
08 01 0d 01 0e 01 10 01 11 01 12 01 13 01 14 01
VESA: 25 mode(s) found
VESA: v2.0, 2496k memory, flags:0x0, mode table:0xc02834c2 (1000022)
VESA: MagicGraph 256 AV 44K PRELIMINARY
VESA: NeoMagic MagicMedia 256 AV 01.0
random: <entropy source>
null: <null device, zero device>
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71928086)
Using $PIR table, 6 entries at 0xc00f01e0
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <TOSHIB 750 > on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfe08-0xfe0b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: physical bus=0
map[10]: type 3, range 32, base e0000000, size 28, enabled
found-> vendor=0x8086, dev=0x7192, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
map[10]: type 3, range 32, base df000000, size 24, enabled
map[14]: type 1, range 32, base ff800000, size 22, enabled
map[18]: type 1, range 32, base ff700000, size 20, enabled
found-> vendor=0x10c8, dev=0x0005, revid=0x12
bus=0, slot=4, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=5, func=0
class=06-80-00, hdrtype=0x00, mfdev=1
map[20]: type 4, range 32, base 0000fe60, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=5, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
map[20]: type 4, range 32, base 0000ffe0, size 5, enabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=5, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=d, irq=11
map[90]: type 4, range 32, base 0000fe70, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x02
bus=0, slot=5, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
map[10]: type 4, range 32, base 0000ff80, size 5, enabled
found-> vendor=0x1179, dev=0x0701, revid=0x23
bus=0, slot=9, func=0
class=07-80-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
found-> vendor=0x1179, dev=0x060f, revid=0x05
bus=0, slot=11, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
intpin=a, irq=255
found-> vendor=0x1179, dev=0x060f, revid=0x05
bus=0, slot=11, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
intpin=b, irq=255
pci0: <PCI bus> on acpi_pcib0
pci0: <display, VGA> at 4.0 (no driver attached)
PCI-ISA bridge with incorrect subclass 0x80
PCI-ISA bridge with incorrect subclass 0x80
isab0: <PCI-ISA bridge> at device 5.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfe60-0xfe6f at device 5.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfe60
ata0: mask=03 ostat0=50 ostat2=00
ata0-slave: ATAPI probe 00 00
ata0-master: ATAPI probe 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA probe 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfe68
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI probe 00 00
ata1-slave: ATAPI probe 00 00
ata1: mask=03 stat0=50 stat1=00
ata1-master: ATA probe 01 a5
ata1: devices=01
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xffe0-0xffff irq 11 at device
5.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at 5.3 (no driver attached)
pci0: <simple comms> at 9.0 (no driver attached)
pccbb0: <ToPIC97 PCI-CardBus Bridge> at device 11.0 on pci0
pccbb0: PCI Memory allocated: 10000000
acpi_pcib0: matched entry for 0.11.INTA (source \\_SB_.LNKA)
acpi_pcib0: device is routed to IRQ 11
cardbus0: <Cardbus bus (newcard)> on pccbb0
pccard0: <16-bit PCCard bus> on pccbb0
pccbb1: <ToPIC97 PCI-CardBus Bridge> at device 11.1 on pci0
pccbb1: PCI Memory allocated: 10001000
acpi_pcib0: matched entry for 0.11.INTB (source \\_SB_.LNKB)
acpi_pcib0: device is routed to IRQ 11
cardbus1: <Cardbus bus (newcard)> on pccbb1
pccard1: <16-bit PCCard bus> on pccbb1
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
ata-: ata1 already exists, using ata2 instead
ata-: ata2 already exists, using ata3 instead
vga-: vga0 already exists, using vga1 instead
sc-: sc0 already exists, using sc1 instead
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x1f0 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00006000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga1: <Generic ISA VGA> failed to probe on isa0
sc1: no video adapter found.
sc1: <System console> failed to probe on isa0
sio0: irq maps: 0x1 0x11 0x11 0x11
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 flags 0x40 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pps0: <Pulse per second Timing Interface> on ppbus0
pcic0 failed to probe on isa0
pcic1 failed to probe on isa0
pmtimer0 failed to probe on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
1:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
acpi_cpu0: set speed to 100.0%
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
acpi_acad0: On Line
ad0: success setting UDMA2 on Intel chip
Creating DISK ad0
ad0: <IBM-DJSA-232/JS8OAD0A> ATA-5 disk at ata0-master
ad0: 30520MB (62506080 sectors), 62010 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
ad1: success setting UDMA2 on Intel chip
Creating DISK ad1
ad1: <IBM-DJSA-232/JS8OAC0A> ATA-5 disk at ata1-master
ad1: 30520MB (62506080 sectors), 62010 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, UDMA33
ad1: piomode=4 dmamode=2 udmamode=4 cblid=1
Mounting root from ufs:/dev/ad0s2a
ad0s1: type 0xb, start 63, end = 8193149, size 8193087 : OK
ad0s2: type 0xa5, start 8193150, end = 62492849, size 54299700 : OK
cardbus0: detach_card: no card to detach!
pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
cardbus1: detach_card: no card to detach!
pccbb1: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
start_init: trying /sbin/init
acpi_acad0: On Line
acpi_acad0: On Line
Creating DISK md10
md10: invalid primary partition table: no magic
md10: invalid primary partition table: no magic
md10: invalid primary partition table: no magic
md10: invalid primary partition table: no magic
ad1s1: type 0x83, start 63, end = 16064, size 16002 : OK
ad1s2: type 0x82, start 16065, end = 2072384, size 2056320 : OK
ad1s3: type 0x83, start 2072385, end = 62492849, size 60420465 : OK
###
### NO ACPI ####
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Thu Aug 30 16:25:32 CEST 2001
root@nihil:/usr/src/sys/i386/compile/nihil
Calibrating clock(s) ... TSC clock: 266608408 Hz, i8254 clock: 1193154 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 266615553 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (266.62-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 268369920 (262080K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00378000 - 0x0ffe7fff, 264699904 bytes (64624 pages)
avail memory = 257871872 (251828K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fc470
bios32: Entry = 0xfc480 (c00fc480) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x827
pnpbios: Found PnP BIOS data at 0xc00fed00
pnpbios: Entry = f0000:92e4 Rev = 1.0
pnpbios: Event flag at 510
pnpbios: OEM ID 7933f351
Other BIOS signatures found:
Preloaded elf kernel "kernel" at 0xc0352000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03520a8.
Preloaded elf module "md.ko" at 0xc03520f8.
Preloaded elf module "if_dc.ko" at 0xc0352194.
Preloaded elf module "miibus.ko" at 0xc0352234.
Preloaded elf module "snd_mss.ko" at 0xc03522d4.
Preloaded elf module "snd_pcm.ko" at 0xc0352374.
Preloaded elf module "usb.ko" at 0xc0352414.
Preloaded elf module "ums.ko" at 0xc03524b0.
Preloaded elf module "if_ep.ko" at 0xc035254c.
Preloaded elf module "fdc.ko" at 0xc03525ec.
mem: <memory & I/O>
Pentium Pro MTRR support enabled
VESA: information block
56 45 53 41 00 02 20 01 00 01 00 00 00 00 22 00
00 01 27 00 13 00 00 01 00 01 09 01 00 01 1b 01
00 01 00 01 01 01 02 01 03 01 04 01 05 01 07 01
08 01 0d 01 0e 01 10 01 11 01 12 01 13 01 14 01
VESA: 25 mode(s) found
VESA: v2.0, 2496k memory, flags:0x0, mode table:0xc02834c2 (1000022)
VESA: MagicGraph 256 AV 44K PRELIMINARY
VESA: NeoMagic MagicMedia 256 AV 01.0
random: <entropy source>
null: <null device, zero device>
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71928086)
Using $PIR table, 6 entries at 0xc00f01e0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> at pcibus 0 on motherboard
pci0: physical bus=0
map[10]: type 3, range 32, base e0000000, size 28, enabled
found-> vendor=0x8086, dev=0x7192, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
map[10]: type 3, range 32, base df000000, size 24, enabled
map[14]: type 1, range 32, base ff800000, size 22, enabled
map[18]: type 1, range 32, base ff700000, size 20, enabled
found-> vendor=0x10c8, dev=0x0005, revid=0x12
bus=0, slot=4, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=5, func=0
class=06-80-00, hdrtype=0x00, mfdev=1
map[20]: type 4, range 32, base 0000fe60, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=5, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
map[20]: type 4, range 32, base 0000ffe0, size 5, enabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=5, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=d, irq=11
map[90]: type 4, range 32, base 0000fe70, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x02
bus=0, slot=5, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
map[10]: type 4, range 32, base 0000ff80, size 5, enabled
found-> vendor=0x1179, dev=0x0701, revid=0x23
bus=0, slot=9, func=0
class=07-80-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
found-> vendor=0x1179, dev=0x060f, revid=0x05
bus=0, slot=11, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
intpin=a, irq=255
found-> vendor=0x1179, dev=0x060f, revid=0x05
bus=0, slot=11, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
intpin=b, irq=255
pci0: <PCI bus> on pcib0
pci0: <display, VGA> at 4.0 (no driver attached)
PCI-ISA bridge with incorrect subclass 0x80
PCI-ISA bridge with incorrect subclass 0x80
isab0: <PCI-ISA bridge> at device 5.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfe60-0xfe6f at device 5.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfe60
ata0: mask=03 ostat0=50 ostat2=00
ata0-slave: ATAPI probe 00 00
ata0-master: ATAPI probe 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA probe 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfe68
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI probe 00 00
ata1-slave: ATAPI probe 00 00
ata1: mask=03 stat0=50 stat1=00
ata1-master: ATA probe 01 a5
ata1: devices=01
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xffe0-0xffff irq 11 at device
5.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at 5.3 (no driver attached)
pci0: <simple comms> at 9.0 (no driver attached)
pccbb0: <ToPIC97 PCI-CardBus Bridge> at device 11.0 on pci0
pccbb0: PCI Memory allocated: 10000000
pci_cfgintr_linked: linked (60) to hard-routed irq 11
pci_cfgintr: 0:11 INTA routed to irq 11
cardbus0: <Cardbus bus (newcard)> on pccbb0
pccard0: <16-bit PCCard bus> on pccbb0
pccbb1: <ToPIC97 PCI-CardBus Bridge> at device 11.1 on pci0
pccbb1: PCI Memory allocated: 10001000
pci_cfgintr_linked: linked (61) to hard-routed irq 11
pci_cfgintr: 0:11 INTB routed to irq 11
cardbus1: <Cardbus bus (newcard)> on pccbb1
pccard1: <16-bit PCCard bus> on pccbb1
pnpbios: 16 devices, largest 501 bytes
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: skipping empty range
PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000
PNP0c01: adding fixed memory32 range 0x100000-0xffeffff, size=0xfef0000
PNP0c01: adding fixed memory32 range 0xfff0000-0xfffffff, size=0x10000
PNP0c01: adding fixed memory32 range 0x100a0000-0x100fffff, size=0x60000
PNP0c01: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000
PNP0c01: end config
pnpbios: handle 1 device ID PNP0c01 (010cd041)
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x81-0x83, size=0x3, align=0x1
PNP0200: adding io range 0x87-0x87, size=0x1, align=0x1
PNP0200: adding io range 0x89-0x8b, size=0x3, align=0x1
PNP0200: adding io range 0x8f-0x8f, size=0x1, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
PNP0200: end config
pnpbios: handle 2 device ID PNP0200 (0002d041)
PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1
PNP0000: adding irq mask 0x4
PNP0000: end config
pnpbios: handle 3 device ID PNP0000 (0000d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: adding irq mask 0x1
PNP0100: end config
pnpbios: handle 4 device ID PNP0100 (0001d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
PNP0800: end config
pnpbios: handle 5 device ID PNP0800 (0008d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
PNP0c04: end config
pnpbios: handle 6 device ID PNP0c04 (040cd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: adding irq mask 0x2
PNP0303: end config
pnpbios: handle 7 device ID PNP0303 (0303d041)
PNP0f13: adding irq mask 0x1000
PNP0f13: end config
pnpbios: handle 8 device ID PNP0f13 (130fd041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: adding irq mask 0x100
PNP0b00: end config
pnpbios: handle 9 device ID PNP0b00 (000bd041)
PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1
PNP0c02: adding io range 0x84-0x86, size=0x3, align=0x1
PNP0c02: adding io range 0x88-0x88, size=0x1, align=0x1
PNP0c02: adding io range 0x8c-0x8e, size=0x3, align=0x1
PNP0c02: adding io range 0xe0-0xef, size=0x10, align=0x1
PNP0c02: adding io range 0xb0-0xb2, size=0x3, align=0x1
PNP0c02: adding io range 0x2e-0x2f, size=0x2, align=0x1
PNP0c02: adding io range 0x62-0x62, size=0x1, align=0x1
PNP0c02: adding io range 0x66-0x66, size=0x1, align=0x1
PNP0c02: adding io range 0x6d-0x6d, size=0x1, align=0x1
PNP0c02: adding io range 0x6f-0x6f, size=0x1, align=0x1
PNP0c02: adding io range 0x480-0x48f, size=0x10, align=0x1
PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0x1
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0x22-0x22, size=0x1, align=0x1
PNP0c02: adding io range 0x92-0x92, size=0x1, align=0x1
PNP0c02: adding io range 0xfeac-0xfeac, size=0x1, align=0x1
PNP0c02: adding io range 0xfe00-0xfe41, size=0x42, align=0x1
PNP0c02: adding io range 0xfe50-0xfe57, size=0x8, align=0x1
PNP0c02: adding io range 0xfe70-0xfe7f, size=0x10, align=0x1
PNP0c02: adding io range 0xfe90-0xfe97, size=0x8, align=0x1
PNP0c02: adding io range 0xfe9e-0xfe9e, size=0x1, align=0x1
PNP0c02: adding irq mask 0x200
PNP0c02: end config
pnpbios: handle 10 device ID PNP0c02 (020cd041)
PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0x1
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
PNP0700: end config
pnpbios: handle 11 device ID PNP0700 (0007d041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1
PNP0501: adding irq mask 0x10
PNP0501: end config
pnpbios: handle 14 device ID PNP0501 (0105d041)
PNP0401: adding io range 0x378-0x37a, size=0x3, align=0x1
PNP0401: adding io range 0x778-0x77a, size=0x3, align=0x1
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x8
PNP0401: end config
pnpbios: handle 16 device ID PNP0401 (0104d041)
PNP0a03: end config
pnpbios: handle 17 device ID PNP0a03 (030ad041)
PNP0e03: adding io range 0x3e0-0x3e1, size=0x2, align=0x1
PNP0e03: end config
pnpbios: handle 20 device ID PNP0e03 (030ed041)
YMH0021: adding io range 0x220-0x233, size=0x14, align=0x1
YMH0021: adding io range 0x530-0x537, size=0x8, align=0x1
YMH0021: adding io range 0x388-0x38f, size=0x8, align=0x1
YMH0021: adding io range 0x330-0x333, size=0x4, align=0x1
YMH0021: adding io range 0x538-0x539, size=0x2, align=0x1
YMH0021: adding irq mask 0x20
YMH0021: adding dma mask 0x2
YMH0021: adding dma mask 0x1
YMH0021: end config
pnpbios: handle 21 device ID YMH0021 (2100a865)
ata-: ata1 already exists, using ata2 instead
ata-: ata2 already exists, using ata3 instead
vga-: vga0 already exists, using vga1 instead
sc-: sc0 already exists, using sc1 instead
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x1f0 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00006000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga1: <Generic ISA VGA> failed to probe on isa0
sc1: no video adapter found.
sc1: <System console> failed to probe on isa0
sio0: irq maps: 0x41 0x51 0x51 0x51
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x41 0x41 0x41 0x41
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 flags 0x40 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pps0: <Pulse per second Timing Interface> on ppbus0
pcic0 failed to probe on isa0
pcic1 failed to probe on isa0
pmtimer0 failed to probe on isa0
isa_probe_children: probing PnP devices
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0f13> can't assign resources
unknown: <PNP0f13> at irq 12 on isa0
unknown: <PNP0700> can't assign resources
unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0401> can't assign resources
unknown: <PNP0401> at port 0x378-0x37a on isa0
unknown: <PNP0e03> failed to probe at port 0x3e0-0x3e1 on isa0
pcm0: <Yamaha OPL-SAx> at port
0x220-0x233,0x530-0x537,0x388-0x38f,0x330-0x333,0x538-0x539 irq 5 drq 1,0 on isa0
Yamaha: ver 0x21 DMA config 0x85
pcm: setmap 9b000, 1000; 0xca5cf000 -> 9b000
pcm: setmap 9c000, 1000; 0xca5d0000 -> 9c000
BIOS Geometries:
0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
1:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
ad0: success setting UDMA2 on Intel chip
Creating DISK ad0
ad0: <IBM-DJSA-232/JS8OAD0A> ATA-5 disk at ata0-master
ad0: 30520MB (62506080 sectors), 62010 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
ad1: success setting UDMA2 on Intel chip
Creating DISK ad1
ad1: <IBM-DJSA-232/JS8OAC0A> ATA-5 disk at ata1-master
ad1: 30520MB (62506080 sectors), 62010 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, UDMA33
ad1: piomode=4 dmamode=2 udmamode=4 cblid=1
Mounting root from ufs:/dev/ad0s2a
ad0s1: type 0xb, start 63, end = 8193149, size 8193087 : OK
ad0s2: type 0xa5, start 8193150, end = 62492849, size 54299700 : OK
cardbus0: detach_card: no card to detach!
pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
cardbus1: detach_card: no card to detach!
pccbb1: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
start_init: trying /sbin/init
Creating DISK md10
md10: invalid primary partition table: no magic
md10: invalid primary partition table: no magic
md10: invalid primary partition table: no magic
md10: invalid primary partition table: no magic
ad1s1: type 0x83, start 63, end = 16064, size 16002 : OK
ad1s2: type 0x82, start 16065, end = 2072384, size 2056320 : OK
ad1s3: type 0x83, start 2072385, end = 62492849, size 60420465 : OK
###
Bye/2
------
Michael Reifenberger - IT, UNIX, R/3-Basis
Work: [EMAIL PROTECTED] Proj: [EMAIL PROTECTED]
Pers: [EMAIL PROTECTED] Webspace: http://www.reifenberger.com
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
