>>>>> In <[EMAIL PROTECTED]> >>>>> [EMAIL PROTECTED] (Andrea Campi) wrote:
AC> Anybody seen anything like this? Well, it may not be the case, but I have similar problem. In my case, just after login via xdm installed from port/x11/XFree86-4, load average gets very much increased up to about 4.0 and the mouse cannot work smoothly. It occurs when uptime becomes one day or more. Fortunately, my system never freeze or hangup. Here is dmesg. Mainboard is ASUS P3V4X and CPU is P3 933MHz with ASUS S370-??. Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #35: Wed Oct 17 15:51:39 JST 2001 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/NAKAJI Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (936.75-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 671072256 (655344K bytes) avail memory = 647983104 (632796K bytes) Preloaded elf kernel "/boot/kernel/kernel" at 0xc0471000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04710b4. Pentium Pro MTRR support enabled Using $PIR table, 8 entries at 0xc00f0e60 apm0: <APM BIOS> on motherboard apm0: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <ASUS P3V_4X > on motherboard acpi0: power button is handled as a fixed feature programming model. acpi_button0: <Power Button> on acpi0 fdc0: <NEC 72065B or clone> port 0x3f7,0x3f2-0x3f5 irq 6 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0 port 0x778-0x77b,0x378-0x37f irq 7 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: IEEE1284 device found /NIBBLE/ECP/ECP_RLE Probing for PnP devices on ppbus0: ppbus0: <EPSON LP-8400PS3> PRINTER POSTSCRIPT plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: failed to get data. psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 pcib0: <Host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 4.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C596 ATA66 controller> port 0xb800-0xb80f at device 4.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <serial bus, USB> at device 4.2 (no driver attached) xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xb000-0xb07f mem 0xe1800000-0xe180007f irq 5 at device 9.0 on pci0 xl0: Ethernet address: 00:01:02:c2:15:af miibus0: <MII bus> on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto csa0: <CS4280/CS4614/CS4622/CS4624/CS4630> mem 0xe0800000-0xe08fffff,0xe1000000-0xe1000fff irq 10 at device 10.0 on pci0 csa: card is Unknown/invalid SSID (CS4614) pcm0: <CS461x PCM Audio> on csa0 ahc0: <Adaptec 2940 Ultra2 SCSI adapter (OEM)> port 0xa800-0xa8ff mem 0xe0000000-0xe0000fff irq 11 at device 12.0 on pci0 aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/255 SCBs atapci1: <HighPoint HPT370 ATA100 controller> port 0x9000-0x90ff,0x9400-0x9403,0x9800-0x9807,0xa000-0xa003,0xa400-0xa407 irq 5 at device 13.0 on pci0 ata2: at 0xa400 on atapci1 ata3: at 0x9800 on atapci1 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcd7ff on isa0 fdc1: cannot reserve I/O port range (6 ports) ppc1: cannot reserve I/O port range ppc2: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ad0: 2441MB <WDC AC32500H> [4960/16/63] at ata0-master WDMA2 ad1: 14655MB <Maxtor 31536U2> [29777/16/63] at ata0-slave UDMA66 ad3: 9765MB <FUJITSU MPC3102AT E> [19841/16/63] at ata1-slave UDMA33 ar0: 43979MB <ATA RAID1 array> [5606/255/63] subdisks: ad4: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata2-master UDMA100 ad6: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata3-master UDMA100 ar1: 43979MB <ATA RAID1 array> [5606/255/63] subdisks: ad4: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata2-master UDMA100 ad6: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata3-master UDMA100 ar2: 43979MB <ATA RAID1 array> [5606/255/63] subdisks: ad4: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata2-master UDMA100 ad6: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata3-master UDMA100 ar3: 43979MB <ATA RAID1 array> [5606/255/63] subdisks: ad4: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata2-master UDMA100 ad6: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata3-master UDMA100 ar4: 43979MB <ATA RAID1 array> [5606/255/63] subdisks: ad4: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata2-master UDMA100 ad6: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata3-master UDMA100 ar5: 43979MB <ATA RAID1 array> [5606/255/63] subdisks: ad4: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata2-master UDMA100 ad6: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata3-master UDMA100 ar6: 43979MB <ATA RAID1 array> [5606/255/63] subdisks: ad4: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata2-master UDMA100 ad6: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata3-master UDMA100 ar7: 43979MB <ATA RAID1 array> [5606/255/63] subdisks: ad4: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata2-master UDMA100 ad6: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata3-master UDMA100 acd0: CDROM <TOSHIBA CD-ROM XM-5602B> at ata1-master PIO3 Waiting 15 seconds for SCSI devices to settle Mounting root from ufs:/dev/ad0s3a da0 at ahc0 bus 0 target 0 lun 0 da0: <IBM DPES-31080 S31Q> Fixed Direct Access SCSI-2 device da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da0: 1034MB (2118144 512 byte sectors: 255H 63S/T 131C) da1 at ahc0 bus 0 target 4 lun 0 da1: <IBM DPSS-318350N S96H> Fixed Direct Access SCSI-3 device da1: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C) da2 at ahc0 bus 0 target 6 lun 0 da2: <QUANTUM FIREBALL SE2.1S PJ09> Fixed Direct Access SCSI-2 device da2: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled da2: 2051MB (4201304 512 byte sectors: 255H 63S/T 261C) lpt0: switched to polled standard mode psmintr: delay too long; resetting byte count The last message is related to mouse, isn't it? BTW, there are too many ar devices while I have only one RAID0 device. :) -- NAKAJI Hiroyuki To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message