I just rebuild my -current system. 

On executing /boot/loader the system rebooted instantly.... I have no
idea what kind of debugging infos I might send, so I send the dmesg as a
first idea (booted with loader.old). The system never gave me any
troubles, I'm recompiling -current about once every two weeks and never
ran into problems.

loader/main.c identifies as:  
src/sys/boot/i386/loader/main.c,v 1.25 2001/11/05 19:03:01 jhb Exp

Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #21: Tue Nov 13 17:51:39 CET 2001
    [EMAIL PROTECTED]:/usr/obj/usr/src/sys/MP
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0430000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04300a8.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 350797159 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (350.80-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x652  Stepping = 2
real memory  = 268423168 (262132K bytes)
avail memory = 256774144 (250756K bytes)
Pentium Pro MTRR support enabled
Using $PIR table, 8 entries at 0xc00f0d10
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS   P2B-LS  > on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <PCI bus> on acpi_pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe4000000-0xe7ffffff at d
evice 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xb800-0xb80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, USB> at device 4.2 (no driver attached)
intpm0: <Intel 82371AB Power management controller> port 0xe800-0xe80f irq 9 at 
device 4.3 on pci0
intpm0: I/O mapped e800
intpm0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus general purpose I/O> on smbus0
intpm0: PM I/O mapped e400 
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xb000-0xb01f mem 0xdc000000-0xdc0f
ffff,0xdf000000-0xdf000fff irq 5 at device 7.0 on pci0
fxp0: Ethernet address 00:e0:18:90:02:74
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <AudioPCI ES1370> port 0xa800-0xa83f irq 5 at device 10.0 on pci0
bktr0: <BrookTree 878> mem 0xde000000-0xde000fff irq 10 at device 11.0 on pci0
bti2c0: <bt848 Hard/Soft I2C controller>
iicbb0: <I2C generic bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iicsmb0: <I2C to SMB bridge> on iicbus0
smbus1: <System Management Bus> on iicsmb0
smb1: <SMBus general purpose I/O> on smbus1
smbus2: <System Management Bus> on bti2c0
smb2: <SMBus general purpose I/O> on smbus2
bktr0: Hauppauge Model 61324 D129
bktr0: Detected a MSP3410D-B4 at 0x80
bktr0: Hauppauge WinCast/TV, Philips PAL I tuner, msp3400c stereo, remote contro
pci0: <multimedia> at device 11.1 (no driver attached)
fdc0: <NEC 72065B or clone> port 0x3f7,0x3f2-0x3f5 irq 6 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
ata-: ata0 already exists, skipping it
ata-: ata1 already exists, skipping it
atkbdc-: atkbdc0 already exists, skipping it
fdc-: fdc0 already exists, skipping it
ppc-: ppc0 already exists, skipping it
sio-: sio0 already exists, skipping it
sio-: sio1 already exists, skipping it
sc-: sc0 already exists, skipping it
vga-: vga0 already exists, skipping it
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ad0: 9671MB <IBM-DTTA-351010> [19650/16/63] at ata0-master UDMA33
acd0: CDROM <TOSHIBA CD-ROM XM-6402B> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
fxp0: promiscuous mode enabled
got bad cookie vp 0xd37bf300 bp 0xc77bfa34

Cheers, Mathias
                            virtual earth
 Mathias Picker
 Geschäftsführer      Gesellschaft für Wissens re/prä sentation mbH

                            [EMAIL PROTECTED] 
                            Fon +49 89  / 540 7425-1
                            Fax +49 89  / 540 7425-9

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message

Reply via email to