I've attached a dmesg from a -current as of yesterday which comes up
with quite a few lock order reversals on booting up, ignore this if
they've been fixed since I cvsup'd.

Simon Dick                                      [EMAIL PROTECTED]
"Why do I get this urge to go bowling everytime I see Tux?"
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #2: Thu Nov 15 16:31:01 GMT 2001
    [EMAIL PROTECTED]:/usr/obj/usr/src/sys/NOT
Preloaded elf kernel "/boot/kernel/kernel" at 0xc04d5000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04d50a8.
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (730.81-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
real memory  = 1073676288 (1048512K bytes)
avail memory = 1040375808 (1015992K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): apic id:  0, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
lock order reversal
 1st 0xc03f7760 allproc @ /usr/src/sys/kern/kern_fork.c:343
 2nd 0xc03b87b0 pool mutex @ /usr/src/sys/kern/kern_sx.c:329
lock order reversal
 1st 0xc03f76e0 proctree @ /usr/src/sys/kern/kern_fork.c:573
 2nd 0xc03b8750 pool mutex @ /usr/src/sys/kern/kern_sx.c:329
lock order reversal
 1st 0xc03b77e0 fork list @ /usr/src/sys/kern/kern_fork.c:646
 2nd 0xc03b8810 pool mutex @ /usr/src/sys/kern/kern_sx.c:204
Pentium Pro MTRR support enabled
VESA: v3.0, 32768k memory, flags:0x1, mode table:0xc00c5477 (c0005477)
VESA: Matrox Graphics Inc.
Using $PIR table, 8 entries at 0xc00f7100
apm: Other PM system enabled.
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMIINT > on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <PCI bus> on acpi_pcib0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 
0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xffa0-0xffaf at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 9 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 9 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ichsmb0: <SMBus controller> at device 7.4 on pci0
device_probe_and_attach: ichsmb0 attach returned 6
ahc0: <Adaptec 2940A Ultra SCSI adapter> port 0xdc00-0xdcff mem 0xdffff000-0xdfffffff 
irq 10 at device 9.0 on pci0
aic7860: Ultra Single Channel A, SCSI Id=7, 3/255 SCBs
ed0: <NE2000 PCI Ethernet (VIA VT86C926)> port 0xd000-0xd01f irq 5 at device 10.0 on 
ed0: address 08:00:39:01:2b:90, type NE2000 (16 bit) 
pcm0: <Creative CT5880-C> port 0xd400-0xd43f irq 9 at device 11.0 on pci0
tx0: <SMC EtherPower II 10/100> port 0xd800-0xd8ff mem 0xdfffe000-0xdfffefff irq 11 at 
device 12.0 on pci0
miibus0: <MII bus> on tx0
qsphy0: <QS6612 10/100 media interface> on miibus0
qsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tx0: address 00:e0:29:0b:d5:31, type SMC9432TX
acpi_button1: <Sleep Button> on acpi0
atspeaker0 port 0x61 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <NEC 72065B or clone> port 0x3f7,0x3f2-0x3f5 irq 6 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc-: atkbdc0 already exists, skipping it
fdc-: fdc0 already exists, skipping it
sio-: sio0 already exists, skipping it
sio-: sio1 already exists, skipping it
vga-: vga0 already exists, skipping it
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
pcf0: can't reserve irq, polled mode.
pcf0: <PCF8584 I2C bus controller> at port 0x320-0x321 irq 5 on isa0
iicbus0: <Philips I2C bus> on pcf0 addr 0xaa
iicsmb0: <I2C to SMB bridge> on iicbus0
smbus0: <System Management Bus> on iicsmb0
smb0: <SMBus general purpose I/O> on smbus0
iic0: <I2C general purpose I/O> on iicbus0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x0>
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
IP packet filtering initialized, divert disabled, rule-based forwarding disabled, 
default to accept, logging disabled
IPsec: Initialized Security Association Processing.
acpi_cpu: CPU throttling enabled, 16 steps from 100% to 6.2%
ad0: 19574MB <IBM-DPTA-372050> [39770/16/63] at ata0-master UDMA66
ad1: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata0-slave UDMA66
acd0: DVD-ROM <Pioneer DVD-ROM ATAPIModel DVD-104S 0123> at ata1-master PIO4
Waiting 8 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s1a
cd0 at ahc0 bus 0 target 5 lun 0
cd0: <YAMAHA CRW4416S 1.0j> Removable CD-ROM SCSI-2 device 
cd0: 8.333MB/s transfers (8.333MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
SMP: AP CPU #1 Launched!
lock order reversal
 1st 0xdaff6d0c process lock @ /usr/src/sys/kern/kern_proc.c:206
 2nd 0xc03b87b0 pool mutex @ /usr/src/sys/kern/kern_sx.c:204
machine         i386
cpu             I686_CPU
ident           NOT
maxusers        128

#To statically compile in device wiring instead of /boot/device.hints
#hints          "GENERIC.hints"         #Default places to look for devices.

makeoptions     DEBUG=-g                #Build kernel with gdb(1) debug symbols

options         INET                    #InterNETworking
options         INET6                   #IPv6 communications protocols
options         IPSEC
options         IPSEC_ESP
options         IPFIREWALL
options         LIBMCHAIN
options         LIBICONV
options         FFS                     #Berkeley Fast Filesystem
options         SOFTUPDATES             #Enable FFS soft updates support
options         NFSCLIENT               #Network Filesystem Client
options         MSDOSFS                 #MSDOS Filesystem
options         CD9660                  #ISO 9660 Filesystem
options         PROCFS                  #Process filesystem
options         UFS_EXTATTR
options         UFS_ACL
options         UFS_DIRHASH
options         ENABLE_VFS_IOOPT
options         COMPAT_43               #Compatible with BSD 4.3 [KEEP THIS!]
options         SCSI_DELAY=8000         #Delay (in ms) before probing SCSI
options         UCONSOLE                #Allow users to grab the console
options         KTRACE                  #ktrace(1) support
options         SYSVSHM                 #SYSV-style shared memory
options         SYSVMSG                 #SYSV-style message queues
options         SYSVSEM                 #SYSV-style semaphores
options         P1003_1B                #Posix P1003_1B real-time extensions
options         KBD_INSTALL_CDEV        # install a CDEV entry in /dev

# Debugging for use in -current
options         DDB                     #Enable the kernel debugger
options         INVARIANTS              #Enable calls of extra sanity checking
options         INVARIANT_SUPPORT       #Extra sanity checks of internal structures, 
required by INVARIANTS
options         WITNESS                 #Enable mutex checks to detects deadlocks and 

# To make an SMP kernel, the next two are needed
options         SMP                     # Symmetric MultiProcessor Kernel
options         APIC_IO                 # Symmetric (APIC) I/O

options         CPU_ENABLE_SSE

device          isa
device          pci
device          agp
#options        PCI_ENABLE_IO_MODES     # Enable pci resources left off by a "lazy 

# Floppy drives
device          fdc

# ATA and ATAPI devices
device          ata
device          atadisk                 # ATA disk drives
device          atapicd                 # ATAPI CDROM drives
device          atapifd                 # ATAPI floppy drives
#device         atapist                 # ATAPI tape drives
options         ATA_STATIC_ID           #Static device numbering

# SCSI Controllers
device          ahc             # AHA2940 and onboard AIC7xxx devices

# SCSI peripherals
device          scbus           # SCSI bus (required)
#device         ch              # SCSI media changers
device          da              # Direct Access (disks)
device          sa              # Sequential Access (tape etc)
device          cd              # CD
device          pass            # Passthrough device (direct SCSI access)
#device         ses             # SCSI Environmental Services (and SAF-TE)

# atkbdc0 controls both the keyboard and the PS/2 mouse
device          atkbdc  1       # At keyboard controller
device          atkbd           # at keyboard
device          psm             # psm mouse

device          vga             # VGA screen
options         VESA

# splash screen/screen saver
device          splash

# syscons is the default console driver, resembling an SCO console
device          sc      1

device          pcm
device          nmdm

# Floating point support - do not disable.
device          npx

# Power management support (see NOTES for more options)
device          apm
# Add suspend/resume support for the i8254.
device          pmtimer

# Serial (COM) ports
device          sio             # 8250, 16[45]50 based serial ports

# Parallel port
device          ppc
device          ppbus           # Parallel port bus (required)
device          lpt             # Printer
#device         plip            # TCP/IP over parallel
device          ppi             # Parallel port interface device
#device         vpo             # Requires scbus and da

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device          miibus          # MII bus support
device          tx              # SMC EtherPower II (83c170 ``EPIC'')
device          ed              # NE[12]000, SMC Ultra, 3c503, DS8390 cards

# Pseudo devices - the number indicates how many units to allocate.
device          random          # Entropy device
device          loop            # Network loopback
device          ether           # Ethernet support
#device         sl              # Kernel SLIP
device          ppp     1       # Kernel PPP
device          tun             # Packet tunnel.
device          pty             # Pseudo-ttys (telnet etc)
device          md              # Memory "disks"
#device         gif             # IPv6 and IPv4 tunneling
#device         faith           # IPv6-to-IPv4 relaying (translation)
device          speaker

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device          bpf             # Berkeley packet filter

# USB support
device          uhci            # UHCI PCI->USB interface
#device         ohci            # OHCI PCI->USB interface
device          usb             # USB Bus (required)
#device         udbp            # USB Double Bulk Pipe devices
device          ugen            # Generic
device          uhid            # "Human Interface Devices"
#device         ukbd            # Keyboard
#device         ulpt            # Printer
device          umass           # Disks/Mass storage - Requires scbus and da
device          ums             # Mouse
#device         urio            # Diamond Rio 500 MP3 player
#device         uscanner        # Scanners
# USB Ethernet, requires mii
#device         aue             # ADMtek USB ethernet
#device         cue             # CATC USB ethernet
#device         kue             # Kawasaki LSI USB ethernet

device          smbus           # Bus support, required for smb below.

device          intpm
device          alpm
device          ichsmb

device          smb

device          iicbus          # Bus support, required for ic/iic/iicsmb below.
device          iicbb

device          ic
device          iic
device          iicsmb          # smb over i2c bridge

device          pcf

Reply via email to