Hi all! I've encountered really awful behavior of my SMC card using tx driver in FreeBSD 4.3. On 100 Mbps network I get the throughput just about 200 kBps :-( Colleagues of mine running some PC based routers have very similar experiences with this driver (in both 4.3 and 4.4 Rel's) The same card running under the exactely same conditions in NetBSD is working pretty good (11 MBps) and in Windows 2000 (8 MBps). Also running other cards (like those with rl drivers) on the same network gives very reasonable results in FreeBSD (approx. 10.5 MBps) so I'm pretty convinced driver is to blame. Does anybody have some workaround for this?
(If there is a need for me to send better diagnostics than it's no problem.) Best regards, Petr Holub ================================================================ Petr Holub CESNET z.s.p.o. Supercomputing Center Brno Zikova 2 Institute of Compt. Science 10200 Praha, CZ Masaryk University Czech Republic Botanicka 68a, 60200 Brno, CZ e-mail: [EMAIL PROTECTED] phone: +420-5-41512278 e-mail: [EMAIL PROTECTED] To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message