On Friday, 28 December 2001 at 14:48:54 -0600, Jim Bryant wrote: > I know this is probably a minor issue, as it is only an annoyance, and > doesn't impact operation or performance, but still.. > > Ever since I concatenated some old drives to make a more reasonable capacity > out of them, I have been noticing the following whenever vinum is loaded at > startup [Note: The dmesg output doesn't show it, but before the check > condition errors, vinum is loaded. Also this occurs when no CF card is > present in the reader, seems to do well when booted with a card in place.]: > > Could vinum not be detecting that this is a removable media device?
This has nothing to do with Vinum. The errors are at the device driver level, and they appear to relate only to the compact flash adaptor. Does it work when Vinum is not loaded? Was there in fact a CF card in the adaptor? Greg > Waiting 15 seconds for SCSI devices to settle > sa0 at ahc0 bus 0 target 5 lun 0 > sa0: <HP C1533A 9608> Removable Sequential Access SCSI-2 device > sa0: 10.000MB/s transfers (10.000MHz, offset 8) > da0 at ahc1 bus 0 target 0 lun 0 > da0: <COMPAQ ST15150W 6213> Fixed Direct Access SCSI-2 device > da0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing > Enabled > da0: 4094MB (8386000 512 byte sectors: 255H 63S/T 522C) > da1 at ahc1 bus 0 target 15 lun 0 > da1: <COMPAQ ST15150W 6215> Fixed Direct Access SCSI-2 device > da1: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing > Enabled > da1: 4094MB (8386000 512 byte sectors: 255H 63S/T 522C) > Mounting root from ufs:/dev/ad0s1a > cd1 at ahc0 bus 0 target 3 lun 0 > cd1: <TOSHIBA CD-ROM XM-6401TA 1009> Removable CD-ROM SCSI-2 device > cd1: 20.000MB/s transfers (20.000MHz, offset 15) > cd1: Attempt to query device size failed: NOT READY, Medium not present > da3 at umass-sim0 bus 0 target 0 lun 0 > da3: <eUSB Compact Flash \\0001> Removable Direct Access SCSI-2 device > da3: 150KB/s transfers > da3: Attempt to query device size failed: NOT READY, Medium not present > cd2 at ahc0 bus 0 target 4 lun 0 > cd2: <NEC CD-ROM DRIVE:841 1.0> Removable CD-ROM SCSI-2 device > cd2: 3.300MB/s transfers > cd2: Attempt to query device size failed: NOT READY, Medium not present > da2 at ahc0 bus 0 target 2 lun 0 > da2: <SEAGATE ST32550N 0022> Fixed Direct Access SCSI-2 device > da2: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled > da2: 2047MB (4194058 512 byte sectors: 255H 63S/T 261C) > cd0 at ahc0 bus 0 target 6 lun 0 > cd0: <NEC CD-ROM DRIVE:466 1.06> Removable CD-ROM SCSI-2 device > cd0: 20.000MB/s transfers (20.000MHz, offset 15) > cd0: Attempt to query device size failed: NOT READY, Medium not present > (da3:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da3:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da3:umass-sim0:0:0:0): SCSI Status: Check Condition > (da3:umass-sim0:0:0:0): NOT READY asc:3a,0 > (da3:umass-sim0:0:0:0): Medium not present > (da3:umass-sim0:0:0:0): Unretryable error -- See complete headers for address and phone numbers To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
