Hi, because I behaved well last year christmas brought a new A30p in replacement for my former Toshiba Tecra 8000 :-) First impression: Nice pice of plastic and silicon. Migrating from the Tecra to the A30p was a few hours for FreeBSD (exclusivly for dump/restore from old to new disk.) Editing rc.conf, fstab and XF86Config took a few minutes. Migrating NT2K took one day for reinstalling all applications and rebooting dozend of times.... BTW: The A30p doesnt have a Floppy by default anymore and no installation CD's for reinstallation. All is preinstalled in a obscure Win98 1Gig Partition at the end of the harddisk which gets called if one presses F11 during startup. But it seems a MBR feature which goes away if one installs an alternative bootblock.
Working Features: - The display X11 @ 1600x1200 via VESA driver (the RADEON chip is not directly supported in XFree 4.1.0) - build-in fxp0 - modular DVD/CDR/CDRW comby (is a Toshiba drive) - USB / USB-mouse - PS/2 - UDMA33/66/100 via ATA(66/100) / ATAPI (33) - OLDCARD via the legacy shims Not working Features: - agp driver (unknown too new chipset) - SMB/IIC-bus ( " ) - Sound (Intel ICH3) - NEWCARD - OLDCARD pcic_pci attachment - Lucent Softmodem (no driver) - Firewire ( " ) - ACPI (I get some Error messages during startup and I'm not sure up to which extend ACPI works) The OLDCARD/NEWCARD/Sound issues seems all to be related to bus mapping problems of register and io memory. See attached files dmesg2.txt and pciconf.txt. Does anyone know how to interpret and resolve the mapping issues? Which bridge-chip is responsible for the agp access? Bye! ---- Michael Reifenberger ^.*Plaut.*$, IT, R/3 Basis, GPS
Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #4: Thu Jan 3 17:58:54 CET 2002 root@nihil:/usr/src/sys/i386/compile/nihil Preloaded elf kernel "/boot/kernel/kernel" at 0xc03ba000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc03ba0b4. Preloaded elf module "/boot/kernel/md.ko" at 0xc03ba104. Preloaded elf module "/boot/kernel/if_dc.ko" at 0xc03ba1ac. Preloaded elf module "/boot/kernel/miibus.ko" at 0xc03ba258. Preloaded elf module "/boot/kernel/if_fxp.ko" at 0xc03ba304. Preloaded elf module "/boot/kernel/usb.ko" at 0xc03ba3b0. Preloaded elf module "/boot/kernel/ums.ko" at 0xc03ba458. Preloaded elf module "/boot/kernel/if_ep.ko" at 0xc03ba500. Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc03ba5ac. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc03ba658. Preloaded elf module "/boot/kernel/if_ed.ko" at 0xc03ba704. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc03ba7b0. Calibrating clock(s) ... TSC clock: 1198991156 Hz, i8254 clock: 1193191 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method Timecounter "TSC" frequency 1198984819 Hz CPU: Pentium III/Pentium III Xeon/Celeron (1198.98-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 133562368 (130432K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x003e1000 - 0x07f4ffff, 129429504 bytes (31599 pages) avail memory = 126046208 (123092K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f73a0 bios32: Entry = 0xfd7e0 (c00fd7e0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd770+0x18e pnpbios: Found PnP BIOS data at 0xc00f7400 pnpbios: Entry = f0000:a138 Rev = 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: mem: <memory & I/O> Pentium Pro MTRR support enabled VESA: information block 56 45 53 41 00 02 00 01 00 01 01 00 00 00 22 00 00 01 00 02 00 01 14 01 00 01 2a 01 00 01 2f 01 00 01 82 01 0d 01 0e 01 0f 01 20 01 92 01 93 01 94 01 95 01 96 01 a2 01 a3 01 a4 01 a5 01 a6 01 VESA: 60 mode(s) found VESA: v2.0, 32768k memory, flags:0x1, mode table:0xc0298b22 (1000022) VESA: ATI MOBILITY RADEON VESA: ATI Technologies Inc. P6 01.00 random: <entropy source> null: <null device, zero device> pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=35758086) Using $PIR table, 14 entries at 0xc00fdeb0 npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <IBM TP-1E > on motherboard ACPI-0294: *** Error: Method execution failed, AE_NOT_EXIST ACPI-0294: *** Error: Method execution failed, AE_NOT_EXIST ACPI-0294: *** Error: Method execution failed, AE_NOT_EXIST ACPI-0294: *** Error: Method execution failed, AE_NOT_EXIST ACPI-0294: *** Error: Method execution failed, AE_NOT_EXIST ACPI-0294: *** Error: Method execution failed, AE_NOT_EXIST ACPI-0294: *** Error: Method execution failed, AE_NOT_EXIST acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI" frequency 3579545 Hz ACPI-0294: *** Error: Method execution failed, AE_NOT_EXIST ACPI-0294: *** Error: Method execution failed, AE_NOT_EXIST ACPI-0294: *** Error: Method execution failed, AE_NOT_EXIST ACPI-0294: *** Error: Method execution failed, AE_NOT_EXIST ACPI-0294: *** Error: Method execution failed, AE_NOT_EXIST acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <thermal zone> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: physical bus=0 map[10]: type 3, range 32, base d0000000, size 28, enabled found-> vendor=0x8086, dev=0x3575, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 found-> vendor=0x8086, dev=0x3576, revid=0x02 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 map[20]: type 4, range 32, base 00001800, size 5, enabled found-> vendor=0x8086, dev=0x2482, revid=0x01 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 intpin=a, irq=11 map[20]: type 4, range 32, base 00001820, size 5, enabled found-> vendor=0x8086, dev=0x2484, revid=0x01 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 intpin=b, irq=11 map[20]: type 4, range 32, base 00001840, size 5, enabled found-> vendor=0x8086, dev=0x2487, revid=0x01 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 intpin=c, irq=11 found-> vendor=0x8086, dev=0x2448, revid=0x41 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 found-> vendor=0x8086, dev=0x248c, revid=0x01 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 map[10]: type 4, range 32, base 000001f0, size 3, enabled map[14]: type 4, range 32, base 000003f4, size 2, enabled map[18]: type 4, range 32, base 00000170, size 3, enabled map[1c]: type 4, range 32, base 00000374, size 2, enabled map[20]: type 4, range 32, base 00001860, size 4, enabled found-> vendor=0x8086, dev=0x248a, revid=0x01 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 intpin=a, irq=255 map[20]: type 4, range 32, base 00001880, size 5, enabled found-> vendor=0x8086, dev=0x2483, revid=0x01 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 intpin=b, irq=11 map[10]: type 4, range 32, base 00001c00, size 8, port disabled map[14]: type 4, range 32, base 000018c0, size 6, port disabled found-> vendor=0x8086, dev=0x2485, revid=0x01 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 intpin=b, irq=11 map[10]: type 4, range 32, base 00002400, size 8, port disabled map[14]: type 4, range 32, base 00002000, size 7, port disabled found-> vendor=0x8086, dev=0x2486, revid=0x01 bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 intpin=b, irq=11 pci0: <PCI bus> on acpi_pcib0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x3000-0x3fff pcib1: memory decode 0xc0100000-0xc01fffff pcib1: prefetched decode 0xe0000000-0xe7ffffff pci1: physical bus=1 map[10]: type 3, range 32, base e0000000, size 27, enabled map[14]: type 4, range 32, base 00003000, size 8, enabled map[18]: type 1, range 32, base c0100000, size 16, enabled found-> vendor=0x1002, dev=0x4c59, revid=0x00 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0 usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0 usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ums0: Logitech USB Mouse, rev 1.10/6.b4, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f irq 11 at device 29.2 on pci0 uhci2: (New UHCI DeviceId=0x24878086) usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: (0x24878086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pcib2: <PCI-PCI bridge> at device 30.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 8 pcib2: I/O decode 0x4000-0x8fff pcib2: memory decode 0xc0200000-0xcfffffff pcib2: prefetched decode 0xe8000000-0xefffffff pci2: physical bus=2 map[10]: type 1, range 32, base 50000000, size 12, enabled found-> vendor=0x1180, dev=0x0478, revid=0xa0 bus=2, slot=0, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 50100000, size 12, enabled found-> vendor=0x1180, dev=0x0478, revid=0xa0 bus=2, slot=0, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base c0201000, size 11, enabled found-> vendor=0x1180, dev=0x0522, revid=0x00 bus=2, slot=0, func=2 class=0c-00-10, hdrtype=0x00, mfdev=1 intpin=c, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base c0200000, size 12, enabled map[14]: type 4, range 32, base 00008000, size 6, enabled found-> vendor=0x8086, dev=0x1031, revid=0x41 bus=2, slot=8, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 pci2: <PCI bus> on pcib2 pccbb0: <RF5C478 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 0.0 on pci2 pcib2: device pccbb0 requested unsupported memory range 0x50000000-0x50000fff (decoding 0xc0200000-0xcfffffff, 0xe8000000-0xefffffff) pccbb0: Could not map register memory device_probe_and_attach: pccbb0 attach returned 12 pccbb0: <RF5C478 PCI-CardBus Bridge> mem 0x50100000-0x50100fff irq 11 at device 0.1 on pci2 pcib2: device pccbb0 requested unsupported memory range 0x50100000-0x50100fff (decoding 0xc0200000-0xcfffffff, 0xe8000000-0xefffffff) pccbb0: Could not map register memory device_probe_and_attach: pccbb0 attach returned 12 pci2: <serial bus, FireWire> at device 0.2 (no driver attached) fxp0: <Intel Pro/100 Ethernet> port 0x8000-0x803f mem 0xc0200000-0xc0200fff irq 11 at device 8.0 on pci2 pcib2: device fxp0 requested decoded memory range 0xc0200000-0xc0200fff fxp0: using memory space register mapping fxp0: Ethernet address 00:d0:59:34:81:d3 fxp0: PCI IDs: 8086 1031 1014 0209 0041 fxp0: Dynamic Standby mode is disabled inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: fxp0 attached isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 ATA100 controller> port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1860 ata0: mask=03 ostat0=50 ostat2=50 ata0-master: ATAPI probe 00 00 ata0-slave: ATAPI probe 14 eb ata0: mask=03 stat0=50 stat1=00 ata0-master: ATA probe 01 a5 ata0: devices=09 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1868 ata1: mask=03 ostat0=50 ostat2=00 ata1-master: ATAPI probe 00 00 ata1-slave: ATAPI probe 00 00 ata1: mask=03 stat0=50 stat1=00 ata1-master: ATA probe 01 a5 ata1: devices=01 ata1: at 0x170 irq 15 on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pcm0: <Intel 82801CA (ICH3)> irq 11 at device 31.5 on pci0 pcm0: unable to map IO port space device_probe_and_attach: pcm0 attach returned 6 pci0: <simple comms> at device 31.6 (no driver attached) unknown: not probed (disabled) unknown: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x54ab (2) kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00006000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A ppc0: using extended I/O port range ppc0: SPP ppc0 port 0x3bc-0x3c3 irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 pps0: <Pulse per second Timing Interface> on ppbus0 EPP: -1 0 unknown: not probed (disabled) acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0 unknown: not probed (disabled) acpi_cmbat0: <Control method Battery> on acpi0 acpi_cmbat1: <Control method Battery> on acpi0 acpi_acad0: <AC adapter> on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) atkbdc: atkbdc0 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xdc000-0xdffff,0xd1000-0xd1fff,0xd0000-0xd0fff,0xc0000-0xcffff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x700ff fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k vga0: vga: WARNING: video mode switching is not fully supported on this adapter VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 91 4f 4f 95 57 0f c0 1f 00 4f 0d 0e 00 00 07 80 90 83 8f 28 1f 8f c1 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 67 91 4f 4f 95 57 0f c0 1f 00 4f 0d 0e 00 00 07 80 90 83 8f 28 1f 8f c1 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff fdc0 failed to probe at port 0x3f0 irq 6 drq 2 flags 0x1 on isa0 isa_probe_children: probing PnP devices BIOS Geometries: 0:03feef3f 0..1022=1023 cylinders, 0..239=240 heads, 1..63=63 sectors 1:03feef3f 0..1022=1023 cylinders, 0..239=240 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: lo0 attached ad0: success setting UDMA5 on Intel chip Creating DISK ad0 ad0: <IC25T048ATDA05-0/DA8OA76A> ATA-5 disk at ata0-master ad0: 45780MB (93759120 sectors), 93015 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 ad0: piomode=4 dmamode=2 udmamode=5 cblid=1 acpi_acad0: On Line ad1: success setting UDMA4 on Intel chip Creating DISK ad1 ad1: <IBM-DJSA-232/JS8OAD0A> ATA-5 disk at ata1-master ad1: 30520MB (62506080 sectors), 62010 C, 16 H, 63 S, 512 B ad1: 16 secs/int, 1 depth queue, UDMA66 ad1: piomode=4 dmamode=2 udmamode=4 cblid=1 ata0-slave: piomode=4 dmamode=2 udmamode=2 dmaflag=1 ata0-slave: success setting PIO4 on generic chip acd0: <TOSHIBA DVD-ROM SD-R2002/1230> CD-RW drive at ata0 as slave acd0: read 4133KB/s (34265KB/s) write 689KB/s (689KB/s), 2048KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, packet acd0: Writes: CD-R, CD-RW, test write acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: 120mm data disc Mounting root from ufs:/dev/ad0s3a ad0s1: type 0xc, start 63, end = 16390079, size 16390017 : OK ad0s2: type 0x1c, start 91627200, end = 93759119, size 2131920 : OK ad0s3: type 0xa5, start 16390080, end = 91627199, size 75237120 : OK start_init: trying /sbin/init acpi_cmbat0: error fetching current battery status -- AE_TYPE acpi_cmbat1: error fetching current battery status -- AE_TYPE ACPI-0294: *** Error: Method execution failed, AE_AML_OPERAND_TYPE acpi_cmbat0: error fetching current battery status -- AE_AML_OPERAND_TYPE ACPI-0294: *** Error: Method execution failed, AE_AML_OPERAND_TYPE acpi_cmbat1: error fetching current battery status -- AE_AML_OPERAND_TYPE acpi_cmbat0: error fetching current battery status -- AE_TYPE ACPI-0294: *** Error: Method execution failed, AE_AML_OPERAND_TYPE acpi_cmbat1: error fetching current battery status -- AE_AML_OPERAND_TYPE ACPI-0294: *** Error: Method execution failed, AE_AML_OPERAND_TYPE acpi_cmbat0: error fetching current battery status -- AE_AML_OPERAND_TYPE ACPI-0294: *** Error: Method execution failed, AE_AML_OPERAND_TYPE acpi_cmbat1: error fetching current battery status -- AE_AML_OPERAND_TYPE ACPI-0294: *** Error: Method execution failed, AE_AML_OPERAND_TYPE acpi_cmbat0: error fetching current battery status -- AE_AML_OPERAND_TYPE acpi_cmbat1: error fetching current battery status -- AE_TYPE ACPI-0294: *** Error: Method execution failed, AE_AML_OPERAND_TYPE acpi_cmbat0: error fetching current battery status -- AE_AML_OPERAND_TYPE ACPI-0294: *** Error: Method execution failed, AE_AML_OPERAND_TYPE acpi_cmbat1: error fetching current battery status -- AE_AML_OPERAND_TYPE procfs registered Creating DISK md10 md10: invalid primary partition table: no magic md10: invalid primary partition table: no magic md10: invalid primary partition table: no magic md10: invalid primary partition table: no magic ad1s1: type 0xb, start 63, end = 8193149, size 8193087 : OK ad1s2: type 0xa5, start 8193150, end = 62492849, size 54299700 : OK
hostb0@pci0:0:0: class=0x060000 card=0x021d1014 chip=0x35758086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' class = bridge subclass = HOST-PCI pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x35768086 rev=0x02 hdr=0x01 vendor = 'Intel Corporation' class = bridge subclass = PCI-PCI uhci0@pci0:29:0: class=0x0c0300 card=0x02201014 chip=0x24828086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' class = serial bus subclass = USB uhci1@pci0:29:1: class=0x0c0300 card=0x02201014 chip=0x24848086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' class = serial bus subclass = USB uhci2@pci0:29:2: class=0x0c0300 card=0x02201014 chip=0x24878086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' class = serial bus subclass = USB pcib2@pci0:30:0: class=0x060400 card=0x00000000 chip=0x24488086 rev=0x41 hdr=0x01 vendor = 'Intel Corporation' device = '82801BAM Hub Interface to PCI Bridge' class = bridge subclass = PCI-PCI isab0@pci0:31:0: class=0x060100 card=0x00000000 chip=0x248c8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' class = bridge subclass = PCI-ISA atapci0@pci0:31:1: class=0x01018a card=0x02201014 chip=0x248a8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' class = mass storage subclass = ATA none0@pci0:31:3: class=0x0c0500 card=0x02201014 chip=0x24838086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' class = serial bus subclass = SMBus none1@pci0:31:5: class=0x040100 card=0x02221014 chip=0x24858086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' class = multimedia subclass = audio none2@pci0:31:6: class=0x070300 card=0x02231014 chip=0x24868086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' class = simple comms none3@pci1:0:0: class=0x030000 card=0x02351014 chip=0x4c591002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies' class = display subclass = VGA none4@pci2:0:0: class=0x060700 card=0x01841014 chip=0x04781180 rev=0xa0 hdr=0x02 vendor = 'Ricoh Co Ltd' device = 'RLc478 CardBus Controller' class = bridge subclass = PCI-CardBus none5@pci2:0:1: class=0x060700 card=0x01841014 chip=0x04781180 rev=0xa0 hdr=0x02 vendor = 'Ricoh Co Ltd' device = 'RLc478 CardBus Controller' class = bridge subclass = PCI-CardBus none6@pci2:0:2: class=0x0c0010 card=0x01cf1014 chip=0x05221180 rev=0x00 hdr=0x00 vendor = 'Ricoh Co Ltd' class = serial bus subclass = FireWire fxp0@pci2:8:0: class=0x020000 card=0x02091014 chip=0x10318086 rev=0x41 hdr=0x00 vendor = 'Intel Corporation' class = network subclass = ethernet