This is on a DELL2550.  I do not have any ATA hard drives, let alone ata
    raid drives or, in fact, any raid drives of any kind.   I do have an ata

    A Feb 5 -current kernel boots fine.

                                        Matthew Dillon 
                                        <[EMAIL PROTECTED]>

/boot/kernel/acpi.ko text=0x2ae68 data=0x1618+0x6ec syms=[0x4+0x4df0+0x4+0x66dd]
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Fri Feb 15 21:51:48 PST 2002
    [EMAIL PROTECTED]:/usr/obj/FreeBSD/FreeBSD-current/src/sys/DELL2550
Preloaded elf kernel "/boot/kernel/kernel" at 0xc03c5000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc03c50a8.
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1130.46-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
real memory  = 1073676288 (1048512K bytes)
avail memory = 1040916480 (1016520K bytes)
Changing APIC ID for IO APIC #0 from 0 to 2 on chip
Changing APIC ID for IO APIC #1 from 0 to 3 on chip
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): apic id:  1, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  0, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x000f0011, at 0xfec00000
 io1 (APIC): apic id:  3, version: 0x000f0011, at 0xfec01000
Pentium Pro MTRR support enabled
Using $PIR table, 8 entries at 0xc00fc270
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL   PE2550  > on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI"  frequency 3579545 Hz
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_pcib0: <Host-PCI bridge> on acpi0
pci0: <PCI bus> on acpi_pcib0
pci0: <display, VGA> at device 14.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x8a0-0x8af at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port 0x8b0-0x8bf at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
acpi_pcib1: <Host-PCI bridge> on acpi0
IOAPIC #1 intpin 1 -> irq 2
pci1: <PCI bus> on acpi_pcib1
pci1: <network, ethernet> at device 8.0 (no driver attached)
acpi_pcib2: <Host-PCI bridge> on acpi0
IOAPIC #1 intpin 0 -> irq 5
pci2: <PCI bus> on acpi_pcib2
pcib3: <PCI-PCI bridge> at device 2.0 on pci2
IOAPIC #1 intpin 15 -> irq 10
IOAPIC #1 intpin 14 -> irq 11
pci3: <PCI bus> on pcib3
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xcc00-0xccff mem 
0xfe7ff000-0xfe7fffff irq 10 at device 4.0 on pci3
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xc800-0xc8ff mem 
0xfe7fe000-0xfe7fefff irq 11 at device 4.1 on pci3
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/255 SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xbcc0-0xbcff mem 
0xfe500000-0xfe5fffff,0xfe900000-0xfe900fff irq 5 at device 4.0 on pci2
fxp0: Ethernet address 00:06:5b:19:be:6f
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 
irq 6 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc: fdc0 already exists; skipping it
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
orm0: <Option ROMs> at iomem 0xec000-0xeffff,0xc8000-0xcdfff,0xc0000-0xc7fff on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
Fatal trap 12: page fault while in kernel mode
cpuid = 0; = 01000000
fault virtual address   = 0x0
fault code              = supervisor read, page not present
instruction pointer     = 0x8:0xc0151134
stack pointer           = 0x10:0xc03e7d54
frame pointer           = 0x10:0xc03e7d64
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, def32 1, gran 1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process         = 0 (swapper)
kernel: type 12 trap, code=0
Stopped at      ata_raid_attach+0x18:   movl    0(%eax,%edx,4),%ebx
db> trace
ata_raid_attach(c1c629e0,c1c65df8,c03e7d84,c01b3556,0) at ata_raid_attach+0x18
ata_boot_attach(0) at ata_boot_attach+0x13d
run_interrupt_driven_config_hooks(0,3e4c00,3e4000,0,c0121b7c) at 
mi_startup() at mi_startup+0x90
begin() at begin+0x43

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message

Reply via email to