I have a Dell Latitude C400 with an Intel i830M graphics chip. Running
4.5-stable, the i810 driver complains about not finding the (I assume AGP)
bridge device. Here's my dmesg.
James.
CPU: Pentium III/Pentium III Xeon/Celeron (797.35-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,FXSR,SSE>
real memory = 267239424 (260976K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00518000 - 0x0fed3fff, 261865472 bytes (63932 pages)
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> q
avail memory = 254971904 (248996K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00ffe80
bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xc00e
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:e2f4 Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
ACPI: 000fde50
Preloaded elf kernel "kernel" at 0xc04f1000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc04f10a8.
netsmb_dev: loaded
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000eac4
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=35758086)
Using $PIR table, 11 entries at 0xc00fbbb0
pcib-: pcib0 exists, using next available unit number
pcib-: pcib0 exists, using next available unit number
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x3575, revid=0x04
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base 00000000, size 0
found-> vendor=0x8086, dev=0x3577, revid=0x04
class=03-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base e0000000, size 27
map[14]: type 1, range 32, base f4f80000, size 19
found-> vendor=0x8086, dev=0x3577, revid=0x00
class=03-80-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base d8000000, size 27
map[14]: type 1, range 32, base f4f00000, size 19
found-> vendor=0x8086, dev=0x2482, revid=0x02
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[20]: type 1, range 32, base 0000bf80, size 5
found-> vendor=0x8086, dev=0x2448, revid=0x42
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=10 secondarybus=2
found-> vendor=0x8086, dev=0x248c, revid=0x02
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x248a, revid=0x02
class=01-01-8a, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=0
map[10]: type 1, range 32, base 000001f0, size 3
map[14]: type 1, range 32, base 000003f4, size 2
map[18]: type 1, range 32, base 00000170, size 3
map[1c]: type 1, range 32, base 00000374, size 2
map[20]: type 1, range 32, base 0000bfa0, size 4
found-> vendor=0x8086, dev=0x2485, revid=0x02
class=04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=11
map[10]: type 1, range 32, base 0000d800, size 8
map[14]: type 1, range 32, base 0000dc80, size 6
found-> vendor=0x8086, dev=0x2486, revid=0x02
class=07-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=11
map[10]: type 1, range 32, base 0000d400, size 8
map[14]: type 1, range 32, base 0000dc00, size 7
pci0: <PCI bus> on pcib0
I810: can't find bridge device
pci0: <Intel model 3577 VGA-compatible display device> (vendor=0x8086,
dev=0x3577) at 2.0 irq 11
pci0: <unknown card> (vendor=0x8086, dev=0x3577) at 2.1
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xbf80-0xbf9f
irq 11 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib3: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
found-> vendor=0x10b7, dev=0x9200, revid=0x78
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 0000ec80, size 7
map[14]: type 1, range 32, base fafffc00, size 7
found-> vendor=0x104c, dev=0xac50, revid=0x02
class=06-07-00, hdrtype=0x02, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
found-> vendor=0x104c, dev=0xac50, revid=0x01
class=06-07-00, hdrtype=0x02, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
pci2: <PCI bus> on pcib3
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec80-0xecff mem
0xfafffc00-0xfafffc7f irq 11 at device 0.0 on pci2
using shared irq11.
xl0: Ethernet address: 00:06:5b:b6:35:b2
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x00105a, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: xl0 attached
pcic0: <TI PCI-1410 PCI-CardBus Bridge> irq 11 at device 1.0 on pci2
pcic0: PCI Memory allocated: 0x44000000
pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][CSC serial isa
irq]
pcic0: PCI Configuration space:
0x00: 0xac50104c 0x02100007 0x06070002 0x00022008
0x10: 0x44000000 0x020000a0 0x20000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00000000
0x30: 0x00000000 0x00000000 0x00000000 0x07e0010b
0x40: 0x00c81028 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x0024d024 0x00000000 0x00000000 0x012c1222
0x90: 0x606482c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe110001 0x00c00000 0x00000000 0x0000001f
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pccard0: <PC Card bus (classic)> on pcic0
pcic1: <TI PCI-1410 PCI-CardBus Bridge> irq 11 at device 3.0 on pci2
pcic1: PCI Memory allocated: 0x44001000
pcic1: TI12XX PCI Config Reg: [pwr save][pci only]
pcic1: PCI Configuration space:
0x00: 0xac50104c 0x02100007 0x06070001 0x00022008
0x10: 0x44001000 0x020000a0 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00000000
0x30: 0x00000000 0x00000000 0x00000000 0x07e0010b
0x40: 0xab0112a3 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00449060 0x00000000 0x00000000 0x01000002
0x90: 0x616000c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe110001 0x00c00000 0x0000000e 0x0000001b
0xb0: 0x08000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pccard1: <PC Card bus (classic)> on pcic1
isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port
0xbfa0-0xbfaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 irq 0 at
device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xbfa0
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xbfa8
ata1: at 0x170 irq 15 on atapci0
pcm0: <Intel 82801CA (ICH3)> port 0xdc80-0xdcbf,0xd800-0xd8ff irq 11 at
device 31.5 on pci0
pcm0: ac97 codec id 0x4352595b
pcm0: ac97 codec features mic channel, tone, simulated stereo, bass boost,
20 bit DAC, 18 bit ADC, 5 bit master volume, SRS 3D Stereo Enhancement
pcm0: ac97 primary codec extended features variable rate PCM, variable rate
mic, AMAP
pcm: setmap 5000, 4000; 0xcc2a3000 -> 5000
pcm: setmap 9000, 4000; 0xcc2a7000 -> 9000
pcm: setmap d000, 4000; 0xcc2ab000 -> d000
pcm0: measured ac97 link rate at 48014 Hz, will use 48000 Hz
pci0: <unknown card> (vendor=0x8086, dev=0x2486) at 31.6 irq 11
pcib1: <Intel Hacked by James (i830M)> on motherboard
pci1: <PCI bus> on pcib1
pci-: pci2 exists, using next available unit number
pcib2: <Intel Hacked by James (i830M)> on motherboard
pci3: <PCI bus> on pcib2
ex_isa_identify()
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
pcic-: pcic0 exists, using next available unit number
pcic-: pcic1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 15 devices, largest 248 bytes
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x2
PNP0a03: end config
pnpbios: handle 0 device ID PNP0a03 (030ad041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0x100000-0xfefffff, size=0xfe00000
PNP0c01: adding fixed memory32 range 0xe0000-0xfffff, size=0x20000
PNP0c01: adding fixed memory32 range 0xfebffc00-0xfebfffff, size=0x400
PNP0c01: adding fixed memory32 range 0xffb80000-0xffbfffff, size=0x80000
PNP0c01: adding fixed memory32 range 0xfff80000-0xffffffff, size=0x80000
PNP0c01: adding fixed memory32 range 0xfeda0000-0xfedfffff, size=0x60000
PNP0c01: adding io range 0x800-0x85f, size=0x60, align=0x1
PNP0c01: adding io range 0x860-0x87f, size=0x20, align=0x1
PNP0c01: adding io range 0x880-0x8bf, size=0x40, align=0x1
PNP0c01: adding io range 0x8c0-0x8ff, size=0x40, align=0x1
PNP0c01: adding io range 0x3f0-0x3f1, size=0x2, align=0x1
PNP0c01: adding io range 0x900-0x90f, size=0x10, align=0x1
PNP0c01: adding io range 0x910-0x91f, size=0x10, align=0x1
PNP0c01: end config
pnpbios: handle 1 device ID PNP0c01 (010cd041)
PNP0c01: adding fixed memory32 range 0xed000000-0xedffffff, size=0x1000000
PNP0c01: adding io range 0xbf40-0xbf5f, size=0x20, align=0x1
PNP0c01: adding io range 0xbf20-0xbf3f, size=0x20, align=0x1
PNP0c01: end config
pnpbios: handle 2 device ID PNP0c01 (010cd041)
PNP0000: adding irq mask 00x4
PNP0000: adding io range 0x20-0x3f, size=0x20, align=0x1
PNP0000: adding io range 0xa0-0xbf, size=0x20, align=0x1
PNP0000: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0000: end config
pnpbios: handle 3 device ID PNP0000 (0000d041)
PNP0100: adding irq mask 00x1
PNP0100: adding io range 0x40-0x5f, size=0x20, align=0x1
PNP0100: end config
pnpbios: handle 4 device ID PNP0100 (0001d041)
PNP0200: adding io range 0x80-0x9f, size=0x20, align=0x1
PNP0200: adding io range 0-0x1f, size=0x20, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
PNP0200: end config
pnpbios: handle 5 device ID PNP0200 (0002d041)
PNP0303: adding irq mask 00x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: end config
pnpbios: handle 6 device ID PNP0303 (0303d041)
PNP0f13: adding irq mask 0x1000
PNP0f13: end config
pnpbios: handle 7 device ID PNP0f13 (130fd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
PNP0800: end config
pnpbios: handle 8 device ID PNP0800 (0008d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x7f, size=0x10, align=0x1
PNP0b00: end config
pnpbios: handle 9 device ID PNP0b00 (000bd041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: end config
pnpbios: handle 10 device ID PNP0c04 (040cd041)
PNP0e03: adding irq mask 0x20
PNP0e03: adding io range 0x3e0-0x3e1, size=0x2, align=0x1
PNP0e03: end config
pnpbios: handle 11 device ID PNP0e03 (030ed041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8
PNP0501: end config
pnpbios: handle 12 device ID PNP0501 (0105d041)
PNP0401: adding dma mask 0x8
PNP0401: adding irq mask 0x80
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0x8
PNP0401: adding io range 0x778-0x77b, size=0x4, align=0x8
PNP0401: end config
pnpbios: handle 14 device ID PNP0401 (0104d041)
PNP0700: adding irq mask 0x40
PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0x2
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x8
PNP0700: adding dma mask 0x4
PNP0700: end config
pnpbios: handle 15 device ID PNP0700 (0007d041)
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem
0xc0000-0xcc7ff,0xcc800-0xccfff,0xcd000-0xcd7ff,0xcd800-0xcdfff,0xce000-0xce
7ff,0xce800-0xcefff,0xcf000-0xcf7ff,0xcf800-0xcffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
adv0: not probed (disabled)
bt0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 02 55 81
bf 1f 00 4f 0d 0e 00 00 07 30 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 02 55 81
bf 1f 00 4f 0d 0e 00 00 07 30 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic2 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic3: not probed (disabled)
sio0: irq maps: 0xa41 0xa51 0xa41 0xa41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0xa41 0xa41 0xa41 0xa41
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
adv1: Invalid baseport of 0xcf8 specified. Nearest valid baseport is 0x330.
Failing probe.
unknown: <PNP0a03> failed to probe at port 0xcf8-0xd07 on isa0
unknown: <PNP0c01> can't assign resources
unknown: <PNP0c01> at port
0x800-0x85f,0x860-0x87f,0x880-0x8bf,0x8c0-0x8ff,0x3f0-0x3f1 iomem
0-0x9ffff,0x100000-0xfefffff,0xe0000-0xfffff,0xfebffc00-0xfebfffff,0xffb8000
0-0xffbfffff,0xfff80000-0xffffffff,0xfeda0000-0xfedfffff on isa0
adv1: Invalid baseport of 0xbf40 specified. Nearest valid baseport is 0x330.
Failing probe.
unknown: <PNP0c01> failed to probe at port 0xbf40-0xbf5f,0xbf20-0xbf3f iomem
0xed000000-0xedffffff on isa0
unknown: <PNP0000> can't assign resources
unknown: <PNP0000> at port 0x20-0x3f,0xa0-0xbf,0x4d0-0x4d1 irq 2 on isa0
adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100.
Failing probe.
unknown: <PNP0100> failed to probe at port 0x40-0x5f irq 0 on isa0
adv1: Invalid baseport of 0x80 specified. Nearest valid baseport is 0x100.
Failing probe.
unknown: <PNP0200> failed to probe at port 0x80-0x9f,0-0x1f,0xc0-0xdf drq 4
on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0f13> can't assign resources
unknown: <PNP0f13> at irq 12 on isa0
adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is 0x100.
Failing probe.
unknown: <PNP0800> failed to probe at port 0x61 on isa0
adv1: Invalid baseport of 0x70 specified. Nearest valid baseport is 0x100.
Failing probe.
unknown: <PNP0b00> failed to probe at port 0x70-0x7f irq 8 on isa0
adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is 0x100.
Failing probe.
unknown: <PNP0c04> failed to probe at port 0xf0-0xff irq 13 on isa0
adv1: Invalid baseport of 0x3e0 specified. Nearest valid baseport is 0x330.
Failing probe.
unknown: <PNP0e03> failed to probe at port 0x3e0-0x3ef irq 5 on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0401> can't assign resources
unknown: <PNP0401> at port 0x378-0x37f on isa0
unknown: <PNP0700> can't assign resources
unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0
pcic1: Event mask 0x6
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: faith0 attached
bpf: lo0 attached
bpf: ppp0 attached
new masks: bio 68c840, tty 631892, net 671892
bpf: sl0 attached
ad0: success setting UDMA5 on Intel chip
Creating DISK ad0
ar: FreeBSD check1 failed
ad0: <IC25N030ATDA04-0/DA4OA70A> ATA-5 disk at ata0-master
ad0: 28615MB (58605120 sectors), 58140 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
Mounting root from ufs:/dev/ad0s2a
ad0s1: type 0x7, start 63, end = 40981814, size 40981752 : OK
ad0s2: type 0xa5, start 40981815, end = 58605119, size 17623305 : OK
start_init: trying /sbin/init
pcic1: Autodetected 3.3V card
pccard: card inserted, slot 1
pcic1: reset 1 int is 10 stat is 4f
pccard: card removed, slot 1
pcic1: BAD Vcc request
pcic1: reset 1 int is 10 stat is 4f
pcic1: Autodetected 3.3V card
pccard: card inserted, slot 1
pcic1: reset 2 int is 70 stat is 4f
pcic1: reset 3 int is 70 stat is 4f
pcic1: reset 0
pccard1: Assigning wi0: io 0x240-0x27f irq 11 mem 0x0-0xffffffff
pcic: I/O win 0 flags 15 240-27f
wi0: Forcing IRQ to 11
pcic: I/O win 0 flags 5 240-27f
wi0: <WaveLAN/IEEE 802.11> at port 0x240-0x27f irq 11 slot 1 on pccard1
pcic: I/O win 0 flags 15 240-27f
wi0: Forcing IRQ to 11
wi0: 802.11 address: 00:02:2d:5b:42:a8
wi0: using Lucent chip or unknown chip
wi0: wi_generic_attach:wi_has_wep = 1
bpf: wi0 attached
pcic1: Event mask 0x9
----- Original Message -----
From: "Benno Rice" <[EMAIL PROTECTED]>
To: "James Satterfield" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Friday, April 05, 2002 9:23 PM
Subject: Re: Intel i830 driver?
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
